Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components

China Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components, Find details about China Sintered Gears, Powdered Metal Parts from Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components

Model NO.
PMG
Type
Circular Gear
Technology
Powder Metallurgy / Machining
Surface Treatment
Quenching / Polishing
Material Standards
DIN 30910 ; Mpif 35 ; JIS Z2550
Density
6.3~7.1g/cm3
Marco Hardness
20 ~ 43 HRC
Tensile Strength
1650 MPa Ultimate
Yield Strength
1270 MPa Ultimate
Size
Customized
Trademark
DALON
Transport Package
Carton / Pallet
Specification
05mm ~ 150mm
Origin
Zhejiang, China
HS Code
8483300090
Model NO.
PMG
Type
Circular Gear
Technology
Powder Metallurgy / Machining
Surface Treatment
Quenching / Polishing
Material Standards
DIN 30910 ; Mpif 35 ; JIS Z2550
Density
6.3~7.1g/cm3
Marco Hardness
20 ~ 43 HRC
Tensile Strength
1650 MPa Ultimate
Yield Strength
1270 MPa Ultimate
Size
Customized
Trademark
DALON
Transport Package
Carton / Pallet
Specification
05mm ~ 150mm
Origin
Zhejiang, China
HS Code
8483300090

Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission ComponentsPm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components

TECHNOLOGY
POWDER METALLURGY /SINTERING
METAL INJECTION MOLDING / MIM
General Material
FC0208/FN0208
17-4Ph/4605
Density
6.7-6.8
7.7-7.8
Hardness
FC0208(20-30HRC)
FN0208(35-40HRC)
17-4Ph(35-40HRC)
4605(45-50HRC)
Application
Medical Apparatus and Instruments
Hardware field
Automobile Industry
Home Appliances

DALON Powder Metallurgy Parts have largest consumers in the automotive, electrical appliances and hand tool industries
and other high-volume industrial segments. which uses powder metallurgy to make sintered gears & spare parts for
engines, transmissions, transfer cases, exhaust , starters, lock systems, steering columns and racks, shock absorbers,
comfort and safety systems and pumps.


Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components
DALON Sintered Metal Parts have wide range of iron-based materials, shapes, finishes, treatments and coatings can be used to
obtain parts with high accuracy and performance. The
Sintered Metal Parts mechanical properties have more greater tensile strength
compare than structural steels or alloy cast iron, by increasing the density of the
Sintered Metal Parts, the mechanical properties are
improved. High load and stronger tension requirement can be respected.
Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components



Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components DALON Sintered Metal Parts Applications Range:

1.Levers, forks, gears, plates, rings and rotors for CVT systems, stoppers. For large components, the Press-Hardening heat treatment allows very hard steels to be formed with minimal dimensional distortion.
2.Rotors, rings, plates and sprockets for power steering pumps, rack guides, and racks for locking and adjusting steering wheels.
3.Gears, couplings, counterweights, compressor plates, pistons and connecting rods, components for awnings, blinds, doors, windows, sundry electrical appliances.
4.Plumbing fittings, lawnmowers, locks, maintenance equipment, industrial machinery, agricultural machinery, medical, trains, gym parts, industrial pumps, etc.

Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission ComponentsPm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components
Pm Powder Metallurgy Metal Bronze Stainless Steel Sintered Parts for Transmission Components
DALON SINTERED PARTS FAQ:

Q: Lubricant Oil Selection?
A: Standard impregnating oil conforms to SAE 30 specifications
Lubricants are suitable for the temperature range from -40°C to 150°C
Also have option for customer to made special oil impregnation by self

Q: De-impregnation & Re-Impregnation?
A: De-impregnation required Degrease and wash in appropriate solvent
Eliminate the lubricant in a furnace heated around 400°C for 40 minutes under a neutral atmosphere such as N2, or with reducing agent such as N2 + H2
Re-Impregnation need Immerge during one hour the parts in an oil bath heated at a temperature between 60°C and 120°C, depending on oil viscosity .Then cool down in an oil bath back to room temperature. Finally drain and dry the self-lubricating bearings.

Q: Factory or Trading Company?
A: DALON established in 2002 and have two factories under DALON group with shareholders, one workshop specialized in sintered bronze bushing and another handles all sintered filter and silencers.

Q: What is MOQ?
A: We are enjoying to grow up together with all of our clients whatever big or small orders. You will become bigger and bigger to be with DALON.

Q: Can DALON make customized products?
A: Yes, DALON can offer OEM / ODM manufacturing

Q: Will drawing or sample design safe after DALON get it?
A: DALON will NOT release your design to any third parties without your permission. Usually we will sign NDA before all drawing and samples.

Q: Can DALON offer design services?
A: DALON have R&D and can offer special design about your requirements with drawing 3D in format IGES/STEP,PDF/ CAD in DGW/DXF & photos.

Q: How about Quality System?
A: DALON have ISO9002 quality system and in-house inspection by Projector, CMM, Hardness Tester, Roughness Tester, Salt Spray Tester, Tensile Strength Test, Caliper, Micrometer, Height Gauge, Ring and Plug Gauge, Pin Gauge ,etc.

Q: About Sample?
A: DALON can supply the samples for FREE, but the customers have to support the tooling cost if have and the courier cost

Q: Tooling Charge?
A: Tooling charge is one off when first order, all future orders would not charge again even tooling repair or under maintaince.

Q: Lead Time?
A: DALON usually effect delivery within 21days after advance payment. Stock items could be delivered within 3days. If item need open tooling, consider extra 7days.

Q: Payment Terms?
A: Advance 50% and balance against copy of shipping B/L. For long term business DALON have more advantage terms for payment.

Q: How to deal with the complains if happens?
A: In any case of complains, please contact DALON within 30days after receive the goods, DALON will find the root causes and corrective & preventive actions. DALON will take full responsibility for the claims.