Industrial Heavy Duty Horizontal Mining Slurry Pump Rubber Parts Impeller F6147
China Industrial Heavy Duty Horizontal Mining Slurry Pump Rubber Parts Impeller F6147, Find details about China Rubber Slurry Pump, Slurry Pump from Industrial Heavy Duty Horizontal Mining Slurry Pump Rubber Parts Impeller F6147
Basic Info.
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Closed
Usage
Pump, Pumps, Ash Pumps
Material
Ultra Chrome Alloy
Seal
Gland Packing; Expeller; Mechanial
Drive Type
E-Motor or Diesel Engine
Warranty
1 Year
Colour
Blue, Yellow, Green
Trademark
DSP
Transport Package
Wooden Packaging Box
Specification
6 inch discharge
Origin
Shijiazhuang, China
HS Code
8413709990
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Closed
Usage
Pump, Pumps, Ash Pumps
Material
Ultra Chrome Alloy
Seal
Gland Packing; Expeller; Mechanial
Drive Type
E-Motor or Diesel Engine
Warranty
1 Year
Colour
Blue, Yellow, Green
Trademark
DSP
Transport Package
Wooden Packaging Box
Specification
6 inch discharge
Origin
Shijiazhuang, China
HS Code
8413709990
Product Desciption
Introduction:
DeShi rubber slurry pump, the wet parts are made of anti-abrasive or anti-corrosive natural rubber, which
can be perfectly interchangeable with the metal parts. Clients can choose different material parts according
to the slurry liquid conditions, such as R08, R26, R33, R55, S31, S42, S45, etc. Rubber lined slurry pumps
are more suitable in delivering high corrosive or abrasive slurries of small particle size without hard
or sharp edges.
Slurry Pump Parameters
For the material of wearing parts,
"M" = metal, ultra chromium alloy;
"R" = anti-abrasive rubber
Detailed Features:
1. Well designed for interchangeable wet parts with metal lined slurry pump.
2. Casing - Casing halves of cast or ductile iron with external reinforcing ribs contain the wear liners and provide
high operating pressure capabilities
3. Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long
bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
4. Pump frame - A rigid, one-piece casting cradles the "cartridge" shaft and bearing assembly. A minimal
number of through bolts hold the pump casing to the frame. An easy means of external impeller adjustment
is provided in a convenient position below the bearing housing.
5. Impeller - Front and rear shrouds have pump-out vanes. This design reduces recirculation and seal
contamination, Elastomer impellers are made from rubber coated high tensile steel, Cast-in impeller threads
require no impeller insert or nuts.
6. Liners - Rubber elastomer liners are interchangeable with hard metal. The elastomer liners are bolted,
not bonded, to the outer casing. Elastomer seal rings back all liner joints.
7. Shaft seal - Packing seal,Centrifugal seal, and Mechanical seal.
8. Driving type - Flexible coupling,V-belt with pulleys,Gearbox,VFD,SCR control etc.
9. The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
10. Easy to install and maintain in on-site application.
Contact
Welcome to contact us any time for details.
Your inquiry will get our prompt attention and response !
DeShi rubber slurry pump, the wet parts are made of anti-abrasive or anti-corrosive natural rubber, which
can be perfectly interchangeable with the metal parts. Clients can choose different material parts according
to the slurry liquid conditions, such as R08, R26, R33, R55, S31, S42, S45, etc. Rubber lined slurry pumps
are more suitable in delivering high corrosive or abrasive slurries of small particle size without hard
or sharp edges.
Slurry Pump Parameters
| Model | Max Power (Kw) | Inlet & Outlet size (inch) | Material for Wear Parts | Flow Rate (Q) | Head (H) meter | Speed (RPM) | Impeller Dia. (mm) | |
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.5/1 | M | 12.6~28.8 | 3.5~8 | 6~68 | 1200~3800 | 152 |
| R | 10.8~25.2 | 3~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | 2/1.5 | M | 32.4~72 | 9~20 | 6~58 | 1200~3200 | 184 |
| R | 25.2~54 | 7~15 | 5.5~41 | 1000~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6~86.4 | 11~24 | 12~64 | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24~55 | 9~52 | 1000~2200 | 245 |
| R | 79.2~180 | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40~100 | 12~56 | 800~1550 | 365 |
| R | 144~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/6 | M | 360~828 | 100~230 | 10~61 | 500~1140 | 510 |
| R | 324~720 | 90~200 | 7~49 | 400~1000 | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | 11~61 | 400~850 | 686 |
| R | 540~1188 | 150~330 | 12~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
| R | 720~1620 | 200~450 | 7~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
| R | 1152~2520 | 320~700 | 13~44 | 300~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | 13~57 | 200~400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | 16.2~34.2 | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/2 | M | 68.4~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | 120 | 6/4 | M | 324~720 | 90~200 | 30~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | 20~94 | 500~1000 | 711 |
"M" = metal, ultra chromium alloy;
"R" = anti-abrasive rubber
Detailed Features:
1. Well designed for interchangeable wet parts with metal lined slurry pump.
2. Casing - Casing halves of cast or ductile iron with external reinforcing ribs contain the wear liners and provide
high operating pressure capabilities
3. Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long
bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
4. Pump frame - A rigid, one-piece casting cradles the "cartridge" shaft and bearing assembly. A minimal
number of through bolts hold the pump casing to the frame. An easy means of external impeller adjustment
is provided in a convenient position below the bearing housing.
5. Impeller - Front and rear shrouds have pump-out vanes. This design reduces recirculation and seal
contamination, Elastomer impellers are made from rubber coated high tensile steel, Cast-in impeller threads
require no impeller insert or nuts.
6. Liners - Rubber elastomer liners are interchangeable with hard metal. The elastomer liners are bolted,
not bonded, to the outer casing. Elastomer seal rings back all liner joints.
7. Shaft seal - Packing seal,Centrifugal seal, and Mechanical seal.
8. Driving type - Flexible coupling,V-belt with pulleys,Gearbox,VFD,SCR control etc.
9. The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
10. Easy to install and maintain in on-site application.
Contact
Welcome to contact us any time for details.
Your inquiry will get our prompt attention and response !
You Might Also Like
12.56m3 Road Tanker Cryogenic Storage Tanker
Instant Detergent Grade HPMC for Liquid Detergent Hydroxypro......
Lmusonu New 3012f 18W Square Portable LED Work Light with Or......
Comfort Fly Knitted Breathable Basket Runners Sneakers Whole......
2" Steel Iron Stainless Steel 180 Degree Lift-up Slip off Do......
High Strength Activated Alumina for Petrochemical Catalyst C......
Insulation Tube 2753 Self-Extinguishable Fiberglass Electric......
Flexible Metal Hose / Composite Hose Crimping Machine
18L Pulse Vacuum Steam Sterilizer (TM- XD20DV )
22 Inch LCD Interactive Glass Multi Touch Screen Bar Coffee ......
Customized Small Parts Aluminum Die Casting
24W AC to DC Adapter