Products

Energy Saving Blower Heated Desiccant Air Dryer for Industrial Compressor for Cement Plant for Factory Hrb-Z700 75nm3 /Min

China Energy Saving Blower Heated Desiccant Air Dryer for Industrial Compressor for Cement Plant for Factory Hrb-Z700 75nm3/Min, Find details about China Adsorption Type Dryer, Energy Saving Desiccant Air Dryer from Energy Saving Blower Heated Desiccant Air Dryer for Industrial Compressor for Cement Plant for Factory Hrb-Z700 75nm3/Min

Model NO.
HRB-Z700
Cooling Way
Water Cooling
Type
Large
Inlet/Outlet
DN125
Cool Water(T/H)
7.4
Water Inlet/Outlet
G1-1/2"
Rated Air Inlet Pressure
0.7MPa
Rated Air Inlet Temperature
30degree
Rated Ambient Temperature
35degree
Trademark
lingyu
Transport Package
Carton/Wooden Cases
Specification
steel
Origin
Zhongshan
HS Code
8419399090
Model NO.
HRB-Z700
Cooling Way
Water Cooling
Type
Large
Inlet/Outlet
DN125
Cool Water(T/H)
7.4
Water Inlet/Outlet
G1-1/2"
Rated Air Inlet Pressure
0.7MPa
Rated Air Inlet Temperature
30degree
Rated Ambient Temperature
35degree
Trademark
lingyu
Transport Package
Carton/Wooden Cases
Specification
steel
Origin
Zhongshan
HS Code
8419399090
Product Description
Product Features
1,Through the RS485 communication interface MODBUS-RTU communication protocol (if other communication protocols are adopted, they shall be determined separately through negotiation), the operation parameters, remote start / stop control of the acquisition equipment, monitoring of the operation status and various fault information can be uploaded and realized; 2,Energy saving: the self-developed ebz200-2 multi-core drive can save more than 10% of the comprehensive energy consumption compared with the fixed cycle mode; the dew point energy-saving control can be selected, which can extend the adsorption time of a single tower and reduce the comprehensive energy consumption by more than 30% under the condition of load fluctuation; 3,Customized high performance adsorbent, designed 20% filling surplus; 4,High performance pneumatic valve, reliable performance, long service life; 5,Taiwan brand high pressure blower; 6,International brands such as Schneider of France are selected as electrical components. 7,304 stainless steel control gas pipeline, beautiful and generous; 8,The special designed diverter has the advantages of high adsorbent utilization rate and small gas pressure loss; 9,High efficiency cooler designed by HTFs software; 10,Siemens PLC controller, Kunlun Tongtai 7-inch large screen touch screen, dynamic monitoring operation process; 11,The most comprehensive signal acquisition, monitoring and display, including: air inlet temperature, heater temperature, regeneration tail gas temperature, a / b tower pressure, blower pressure, dew point temperature (optional)
 
Energy Saving Blower Heated Desiccant Air Dryer for Industrial Compressor for Cement Plant for Factory Hrb-Z700 75nm3/MinEnergy Saving Blower Heated Desiccant Air Dryer for Industrial Compressor for Cement Plant for Factory Hrb-Z700 75nm3/MinEnergy Saving Blower Heated Desiccant Air Dryer for Industrial Compressor for Cement Plant for Factory Hrb-Z700 75nm3/Min

 

working principle: 

 

 

    The blower heated regenertative adsorption dryer(Zero gas consumption) is composed of two adsorption towers which work alternately, including blower, electric heater system, cooler system, switching valve system, control system, etc. In the whole working cycle, one adsorption tower is in adsorption, the other adsorption tower is in regeneration desorption. The zero air consumption regenerative adsorption dryer with air blast heat is based on the micro air consumption regenerative adsorption dryer with air blast heat, and a cooler is added. The ambient air inhaled by the blower is heated by the heater to desorb the moisture from the adsorbent. In the cooling stage, the hot air circulates through the cooler and the regeneration tower. The regeneration tower is cooled and desorbed by continuous closed cycle. The whole regeneration process does not consume compressed air.            

    Compared with the same period of last year, no heat regeneration dryer can save more than 70% energy. Such remarkable energy-saving benefits, in today's energy shortage, the zero gas consumption regeneration adsorption dryer with blast heat is worthy of our vigorously promotion.

FAQ

Q: Are you a factory or a trading company? 
A: We are factory. And we have ourselves trading company.

Q: What is the specific address of your company?
A: No.3, 2nd Street, yuanle Road, Dongsheng Town, Zhongshan City, Guangdong Province, China

Q: Do your company accept ODM & OEM? 
A: Yes, of course. We accept full ODM & OEM.

Q: What about the voltage of products? Can they be customized? 
A: Yes, of course. The voltage can be customized according to your requirement.


Q: Do your company offer spare parts of the machines? 
A: Yes, of course, high quality spare parts are available in our factory.

Q: What are your payment terms? 
A: 30% T/T in advance, 70% T/T before delivery. 

Q: What payment ways do you accept? 
A: T/T, Western Union

Q: How long will you take to arrange the goods? 
A: For normal voltages,we can delivery the goods within 7-15 days. For other electricity or other customized machines, we
will delivery within 25-30 days.

You Might Also Like