Products

Electrical Cable Copper Wire Annealing Tinning Winding Extrusion Winding Drawing Bunching Stranding Making Machine

China Electrical Cable Copper Wire Annealing Tinning Winding Extrusion Winding Drawing Bunching Stranding Making Machine, Find details about China Wire Twisting Machine, Cable Machine from Electrical Cable Copper Wire Annealing Tinning Winding Extrusion Winding Drawing Bunching Stranding Making Machine

Model NO.
FC-650B
Type
High-speed Stranding Machine
Trademark
fuchuan
Transport Package
Standard Packing
Specification
3300L*1550W*1800H mm
Origin
China
HS Code
8479811000
Model NO.
FC-650B
Type
High-speed Stranding Machine
Trademark
fuchuan
Transport Package
Standard Packing
Specification
3300L*1550W*1800H mm
Origin
China
HS Code
8479811000
A.Main performance parameters of FC-650B automatic high speed bunching machine (replace of the capstan wheel to change the lay length).
  1. Usage:It is applied to the stranding of bare copper wire, tinned wire, copper covered aluminum wire, lacquer wire and alloy wire and so on. 1+6 may twist instead of bunching.
2.Diameter of single copper wire: φ0.16~φ1.04mm
3.Outer diameter of wire: φ0.84~φ3.2mm;
4.Cross section area: φ0.40~φ6mm2
5.Size of take up spool: φ630mm×430mm×φ125mm(according to client's drawings to make).
6. Maximum rotating speed:2000rpm(4000twist),in normal working speed1800rpm(3600twist).
7.Type of traverse: φ30mm rolling ring traverse, winding pitch and breadth are adjustable.
8. Standard lay length: 34 section 11.6~100mm (enclose list of standard lay length).
9. Main motor: 7.5KW AC motor +frequency converter
10. Weight of copper load: about 400kg
11. Direction of strand: optional for right or left, only need to pull the reverse rod of the traverse by hands to adjust the lay-length, easy to operate.
12. Brake: electromagnetic brake for external break, automatic stop when wire reach setting meter.
13. Tension control: take up tension is controlled by magnetic powder clutch, PLC follows up and regulates tension constant tension.
14. Whole machine drive bearing:main shaft is from Sweden SKF bearing,other is adopted imported Japan NSK bearing.
15. Synchronization strap: with imported from American.
16. Spool from top to bottom: it is adopted manual hydraulic pump lifting.
17. Way of spindle lubrication: butter lubrication.
18. Index of noise: lower than 82dB
19. Dimension: 3300L×1450W×1650H(mm)
20. Weight: 4500Kg
21. Coating: Ral5015sky blue (may according to customer's requirements).
22. Package: simple waterproof packing
23. Direction: this machine is on your left, when you are in the face of front door, and pay-off on your right (may according to customer's requirements to make).
24. Sealing of machinery door: seal of plastic.
25. Spindle housings sealing: mechanical block oil ring
Electrical Cable Copper Wire Annealing Tinning Winding Extrusion Winding Drawing Bunching Stranding Making Machine
Electrical Cable Copper Wire Annealing Tinning Winding Extrusion Winding Drawing Bunching Stranding Making Machine
Electrical Cable Copper Wire Annealing Tinning Winding Extrusion Winding Drawing Bunching Stranding Making Machine
Electrical Cable Copper Wire Annealing Tinning Winding Extrusion Winding Drawing Bunching Stranding Making Machine
Electrical Cable Copper Wire Annealing Tinning Winding Extrusion Winding Drawing Bunching Stranding Making Machine
 

You Might Also Like