Anti-Wear Slurry Pump Parts Ceramics Ceramic Impeller Shaft Sleeve
China Anti-Wear Slurry Pump Parts Ceramics Ceramic Impeller Shaft Sleeve, Find details about China Ceramic Impeller, Slurry Pump Spares from Anti-Wear Slurry Pump Parts Ceramics Ceramic Impeller Shaft Sleeve
Basic Info.
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Closed
Usage
Pump, Pumps, Ash Pumps
Material
Ultra Chrome Alloy
Seal
Gland Packing; Expeller; Mechanial
Drive Type
E-Motor or Diesel Engine
Warranty
1 Year
Colour
Blue, Yellow, Green
Trademark
DSP
Transport Package
Wooden Packaging Box
Specification
6 inch discharge
Origin
Shijiazhuang, China
HS Code
8413709990
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Closed
Usage
Pump, Pumps, Ash Pumps
Material
Ultra Chrome Alloy
Seal
Gland Packing; Expeller; Mechanial
Drive Type
E-Motor or Diesel Engine
Warranty
1 Year
Colour
Blue, Yellow, Green
Trademark
DSP
Transport Package
Wooden Packaging Box
Specification
6 inch discharge
Origin
Shijiazhuang, China
HS Code
8413709990
Product Desciption
Introduction:
DeShi pumps(DSP)' strength lies in the advanced hydraulic design and the high standard of casting technology,
high performance of wear life, which helps clients reduce the cost and easy operation.
DSP slurry pump parts are designed for ultra heavy duty applications such as mill discharge, process plant
and tailings, as well as other specialty applications.
The wearing parts include impeller, volute liner, throat bush, FPL insert, shaft sleeve, seals, etc. These parts
are very easily worn-out because they work under longtime impact of abrasive and corrosive slurries in the
high speed. So clients will be strongly suggested to prepare enough wearing parts in stock in case of emergent
repair or maintenance, making sure the continuous steady running.
The wet parts material:
M: metal (wear-resistant ultra chrome alloy)
R: rubber (R26; R33; R55; R08; S31;S42 ...)
Polyurethane Parts can be interchangeable with rubber ones.
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no
inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of
maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow
positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long
bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Welcome to contact us any time for details.
Your inquiry will get our prompt attention and response !
DeShi pumps(DSP)' strength lies in the advanced hydraulic design and the high standard of casting technology,
high performance of wear life, which helps clients reduce the cost and easy operation.
DSP slurry pump parts are designed for ultra heavy duty applications such as mill discharge, process plant
and tailings, as well as other specialty applications.
The wearing parts include impeller, volute liner, throat bush, FPL insert, shaft sleeve, seals, etc. These parts
are very easily worn-out because they work under longtime impact of abrasive and corrosive slurries in the
high speed. So clients will be strongly suggested to prepare enough wearing parts in stock in case of emergent
repair or maintenance, making sure the continuous steady running.
The wet parts material:
M: metal (wear-resistant ultra chrome alloy)
R: rubber (R26; R33; R55; R08; S31;S42 ...)
Polyurethane Parts can be interchangeable with rubber ones.
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no
inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of
maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow
positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long
bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Welcome to contact us any time for details.
Your inquiry will get our prompt attention and response !
You Might Also Like
Aluminium/Aluminum Foil 1235-O for Capacitor Foil Condenser
L2500xd900xh4500mm Single Deep Selective Pallet Heavy Duty R......
Mini Voltage Regulator 220 Volt
Different Types of Curly Weave Hair Virgin Mongolian Hair Wh......
132kw 120kpa Sewage Treatment Industry Vf/VSD Type Oil-Free ......
Multi Bag Housing 12 Nos of Bag Filter Housing for Big Flow ......
Evaporator Crystallizer 2L Mini Vacuum Rotavapor
Cog 128X64 LCM Module FSTN Display Mode 18pin White LED Back......
High Pressure Flexible Spray Hose for Paint and Adhesive
Sealed potting machine foam sealing machine/equipment KW-520
Cordless Vacuum Cleaner 2 in 1 Cordless Handheld VAC for Har......