M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace

M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace, Find details about China UHP 450 Graphite Electrodes, Graphite Electrode from M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace

Model NO.
RX-UHP450
Application
Eaf and Lf Furnace for Steeling Melting
Resistivity
4.5-5.8
Bulk Density
1.75 g/cm3
Rupture Strength
20 MPa(Min)
Young′s Modulus
18 Gpa(Max)
Ash
0.3%(Max)
Cte
1.4(100-600c)Max
Delivery Time
7-10 Days
Trademark
RONGXING
Transport Package
Wooden Pallets with Steel Strips
Specification
Diameter from 200mm to 700mm
Origin
China
HS Code
8545110000
Model NO.
RX-UHP450
Application
Eaf and Lf Furnace for Steeling Melting
Resistivity
4.5-5.8
Bulk Density
1.75 g/cm3
Rupture Strength
20 MPa(Min)
Young′s Modulus
18 Gpa(Max)
Ash
0.3%(Max)
Cte
1.4(100-600c)Max
Delivery Time
7-10 Days
Trademark
RONGXING
Transport Package
Wooden Pallets with Steel Strips
Specification
Diameter from 200mm to 700mm
Origin
China
HS Code
8545110000

RONGXING CARBON CO INTRODUCTION:

M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace


We manufacture & export Graphite Electrode for 27 YEARS. We can supply Graphite Electrodes with IMMEDIATE DELIVERY.

RongXing has been become a valuable and reliable brand for graphite and carbon products in domestic and overseas. 


Graphite Electrode Introduction

Application:electric arc furnace(EAF),ladle furnaces (LF) ,direct current arc furnace(DCF);

Raw materials : Needle coke, CPC, coal pitch;

Grade: RP / HP / UHP; 
Diameter:200-700 mm;

Length:1800 / 2100mm / 2400mm / 2700 mm.

The annual production capacity:

Graphite Electrodes:50,000 tons;

Electrode Paste: 200,000 tons;

Pre-baked anodo:100,000 tons;

Calcined petroleum coke:250,000 tons.

Why Choose us:

Product Advantages (RP HP UHP Graphite Electrode):

1. Low resistivity;
2. Good electrical conductivity;
3. Low ash;
4. Compact and uniform structure;
5. Good oxidation resistance;
6. Mechanical strength

Enterprise advantages:

1. Over 20 years of graphite electrode and metallurgical industry expertise;

2. Supreme Quality system;

3. Cost-effective;

4. Securing the most economical ocean & railroad freight;

5. Having vast inventory;

6. Best after sales service:we would take all responsibility in case any issue happened even we lost money ,also we go aboard to supply technical
support to ensure project we contracted go smoothly.
M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace
M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace
Test Report
M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace
Shipping
M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace


Graphite Electrode Spec(HP/UHP/RP)
M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace
Current Load and Current Density(RP/HP/UHP Graphite Electrode)

M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace
Nipple Size and Nipple Range(4 Buckle) Unit:mm
M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace
Nipple Size and Nipple Range(3 Buckle) Unit:mm

M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace
Graphite Electrode Using Guide


Being hard and brittle,artificial RP HP UHP graphite electrode shall be specially handled.Proper operation may reduce the consumption and cost.
1. Use special hoist tools to hoist graphite electrode.It is strictly forbidden to prize electrode ends up with crowbar.It must be handled with great care
during transportation to avoid damage.

2. Graphite electrode must be kept away from being moistened or wetted by rain,snow and water,and must be kept dry.It must be dried in the furnace before use.The drying temperature in the furnace shall be less then 100ºC.The drying period
shall be not less than 48 hours.

3. Not to be stored up near clay,slag etc.to avoid surface pollution and increasing resistivity. 
4. Carefully checking before connection,make sure that the socked and nipple thread is not damaged,nipple pitch plug is in.Nipple screw shall not be
damaged during lifting.

5. Blow the nipple and socket threads with compressed air.
6. Graphite electrode must be connected contacted closely and straightly.Use moment spanner for connecting electrode with suitable force.The gap
between electrodes shall less than 0.4mm.

7. The holding device must hold the electrode tightly,good contact and no arc.Otherwise,the connecting area will get red and oxidized and thin,leading 
breakage.

8. Threaded portion of nipple socket shall not be damaged during hoisting by metal plug.Hoisting plug shall spin out and keep nipple socket clean.
9. Lifting device of electrode must move stably when moving electrode.carefully check the  position of furnace cover after being repaired.To seal the
cover with refractory to prevent up electrode from being oxidized by fire.


10. The holding device of electrode shall hold the electrode beyond the socket area.
11. For charging the furnace,the large scrap should be put at the bottom,the small one on the top,Charge material with low electric conductivity shall
not been put on the top.In the course of melting,un-melted material shall be taken in time to avoid electrode breaking by falling material.
M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace

Customers Visiting and Technical Support:

M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace

FAQ:

1. Are you factory?

A: Yes.

2. How is the delivery time?

A: 10-15 days.

3. Do u have inventory?

A:Yes.

4. Trade and payment terms?

A: Trade term accepts FOB, CFR, CIF, EXW, etc. Payment method usually by T/T, L/C,Western union,Paypal etc. 

5. How is your after sales service?

A:Our engineer go to your country to provide technical support for free,we would take all responsibility in case any quality issue happened.

Very Welcome to Contact Us. Thank you.


M150 China Factory Price UHP 450mm Graphite Electrode Lf Furnace