UHP450 -600 Graphite Electrode

China UHP450-600 Graphite Electrode, Find details about China UHP Graphite Electrode, Electrode from UHP450-600 Graphite Electrode

Model NO.
UHP
Trademark
Molong
Transport Package
Packing with Wooden Case and Pallet,
Specification
UHP
Origin
China
Model NO.
UHP
Trademark
Molong
Transport Package
Packing with Wooden Case and Pallet,
Specification
UHP
Origin
China
UHP450-600 Graphite Electrode

Plant Provide  UHP450-600 Graphite Electrode 

Introduction

graphite electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch.after calcining,burdening,kneading,forming,baking and pressure impregnation, graphitization and then precision machined with professional CNC machining.such of the products own characteristics with low resistivity, good electrical conductivity ,low ash, compact structure,good anti oxidation and high mechanical strength, so it is the best conductive material for electric arc furnace and smelting furnace.

UHP Graphite Electrode Specification
ItemsUHP
Φ450-600
Resistance μΩ.m (max)Electrode5.5
Nipple3.8
Bulk Density g/cm3 (min)Electrode1.66
Nipple1.75
Bending Strength Mpa(min)Electrode11
Nipple20
Young's Modulus Gpa(Max)Electrode14
Nipple18
Ash  % (max)Electrode0.3
Nipple0.3
CTE (100-600ºC)×10^-6/ºCElectrode1.5
Nipple1.4


Package&Transportation
Packing with wooden case and pallet,and enlace with baling band.
UHP450-600 Graphite Electrode


Application

Used in EAF and LF for steel making, as well as in electric smelting furnace for producing industrial silicon, yellow phosphorus, etc.

Notes of usage

1.To Place the nipples, first use compressed air to clean the hole, then carefully screwed the nipples into it (do not damage the thread).
2.To connect the electrodes, when there's 20-30mm distance between the two electrodes, using compressed air to clean the two extremes.
3.Connector locations should be selected c-map.
4.When use the wrenches to connect electrodes, should be fully tighten to specified torque. 
5.To avoid electrode broken, please remove the insulating material in the furnace.
6.To avoid electrode broken, pls. place the big block in the lower and smaller block at the upper. 

Contact:
contact person: andrea