China UF 4040 Ultrafiltration Hollow Fiber Membrane for UF System, Find details about China Ultra Filtration Membrane, UF Membrane from UF 4040 Ultrafiltration Hollow Fiber Membrane for UF System
Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) |
UF-4040 | UF-4040 | 101 | 19 | 27 | 1016 |
Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
UF-4046 | UF-4046 | 169 | 113 | 112.5 | 965 | 1155 |
Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
UF-6060 | UF-6060 | 195 | 160 | 160 | 1132 | 1352 |
Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
UF-8060 | UF-8060 | 320 | 237 | 183.5 | 1020 | 1415 |
Product Code | Module Type | A (mm) | B (mm) | C (mm) | L1(mm) | L2(mm) |
UF-1060 | UF-1060 | 323 | 303 | 173 | 1600 | 1713 |
Module | UF-4040 | UF-4046 | UF-6060 | UF-8060 | UF-1060 |
Module type | Inside-out | Inside-out | Inside-out | Inside-out | Inside-out |
Shell and seal materials | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins | PVC,epoxy resins |
Membrane Material | PAN/PVC | PAN/PVC | PAN/PVC | PAN/PVC | PAN/PVC |
Molecular Weight Cut off(Dalton) | 50.000 | 50.000 | 100.000 | 100.000 | 100.000 |
Size (mm) | Ø90×1016 | Ø90×1155 | Ø160×1352 | Ø200×1415 | Ø250×1713 |
Effective membrane area | 4m2 | 4.8m2 | 15m2 | 25m2 | 52m2 |
Hollow fiber id/od size | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm | 1.0mm/1.6mm |
Max operating pressure | 0.3Mpa | 0.3Mpa | 0.3Mpa | 0.3Mpa | 0.3Mpa |
Suggest operating pressure | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa |
Max transmembrane pressure | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa | <0.2Mpa |
Backwash pressure | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa | 0.05-0.1Mpa |
Produced water pollution index( SDI 25) | <3 | <3 | <1 | <3 | <3 |
Initial flux | 0.8m3/h | 1.0m3/h | 4.5m3/h | 5m3/h | 9m3/h |
Design flux | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h | 40-150L/m2/h |
Operating mode | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow | Cross flow or dead-end flow |
Bacteria removal rate | >4log | >4log | >6log | >6log | >6log |
Permeate turbidity | <0.1NTU | <0.1NTU | <0.1NTU | <0.1NTU | <0.1NTU |
Operating temperature | 5~40ºC | 5~40ºC | 5~40ºC | 5~40ºC | 5~40ºC |
PH range | 2~10 | 2~10 | 2~10 | 2~10 | 2~10 |
UF2880 | Filtration Type | Outside-In |
Max. Working Pressure (@ 20ºC) | 94 psi (0.62MPa / 6.25bar) | |
Suggested Working Pressure | 43 psi (0.3MPa / 3bar) | |
Backwash pressure(suggested) | 36 psi (0.25Mpa /2.5bar ) | |
Air Flush Rate(Duration 2~4mins)(suggested) | 7~9 acfm (12~15m3/h) | |
Max. Trans-Membrane Pressure Drop(TMP) | 30 psi (0.2MPa / 2bar) | |
Feed Water Temperature | 1~40ºC | |
Active Membrane Area | 77 m2(829ft2) | |
Filtrate Water Flow Range | 13~40 GPM (3~9M3PH) | |
Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø) | 100,000 Dalton (0.01µm~0.1 µm) | |
Hollow Fiber Tubes In/Out Diameter | 0.6/1.2mm | |
pH Range of Feed Water During Continuous Operation | 2~11 | |
Operation Mode | Cross flow/Dead-end flow | |
Max Feed Water Turbidity | < 300 NTU | |
Product Water Turbidity | <0. 1 NTU | |
Feed Water Particle size (max.) | < 300 µ | |
Feed Water SDI15 | < 25 | |
Product Water SDI15 | < 2.5 | |
Product water average flow in system(Suggested) | Approximately 3M3PH |
UUF2860 | Filtration Type | Outside-In |
Max. Working Pressure (@ 20ºC) | 94 psi (0.62MPa / 6.25bar) | |
Suggested Working Pressure | 43 psi (0.3MPa / 3bar) | |
Backwash pressure(suggested) | 36 psi (0.25Mpa /2.5bar ) | |
Air Flush Rate(Duration 2~4mins)(suggested) | 7~9 acfm (12~15m3/h) | |
Max. Trans-Membrane Pressure Drop(TMP) | 30 psi (0.2MPa / 2bar) | |
Feed Water Temperature | 1~40ºC | |
Active Membrane Area | 55 m2(592ft2) | |
Filtrate Water Flow Range | 9~27 GPM (2~6M3PH) | |
Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø) | 100,000 Dalton (0.01µm~0.1 µm) | |
Hollow Fiber Tubes In/Out Diameter | 0.6/1.2mm | |
pH Range of Feed Water During Continuous Operation | 2~11 | |
Operation Mode | Cross flow/Dead-end flow | |
Max Feed Water Turbidity | < 300 NTU | |
Product Water Turbidity | <0. 1 NTU | |
Feed Water Particle size (max.) | < 300 µ | |
Feed Water SDI15 | < 25 | |
Product Water SDI15 | < 2.5 | |
Product water average flow in system(Suggested) | Approximately 2.5M3PH |
MODEL | L | L1 | L2 | L3 | D | In/out Ø |
UF2860 | 1860 mm (73'') | 1500 mm (59'') | 1630mm (64'') | 1820 mm (72'') | 225mm (9'') | DN50 mm (2'') |
UF2880 | 2360 mm (93'') | 2000 mm (79'') | 2130mm (84'') | 2320 mm (91'') | 225mm (9'') | DN50 mm (2'') |