China Stainless Steel Pipe Screw Conveyor, Find details about China Conveyor, Screw Conveyor from Stainless Steel Pipe Screw Conveyor
| 1.Simple structure Small size, high speed, can ensure rapid and uniform convey material |
| 2.Large capacity Large carrying capacity, security and reliable. |
| 3.High efficiency transport It adopts a new type of middle hanging bearing frame to increase the material handling space and reduce logistics resistance. With the design of small diameter, high-speed and variable pitch, it can ensure smooth and rapid material flow. |
| 4.Arbitrary arrangement Conveyor casing adopts high-quality seamless steel pipe, and all segments can be connected as a whole by flange. This screw conveyor can be directly connected with other equipment and no need basic foundation. What's more, it can make full use of space and move freely. |
| 5.Diversified Union Inlet and outlet can be connected by flange, bag connection, universal interface and other forms.Cleaning device in outlet, lower noise, flexible layout for inlet and outlet. |
| 6.Reliable sealing There is a waterproof device in the connection of screw conveyor casing. It can protect material blockage caused by infiltration of rainwater.Good rigidity and sealing. |
| 7.No need to add oil Due to application of new intermediate bearing, it can not only reduce friction, but also achieve self-lubricating. Even if long-term use, there is also no need to add lubricating oil. |
| Widely application: Construction is made from mild steel or stainless steel so that auger screw machine can be widely used for all kinds of material. |
| No pollution: Powder tubular auger conveyor with totally-enclosed structure has no any environmental pollution. |
| Easy to install: With simple structure, auger screw machine is easy to assemble and replace the component parts. |
| Easy maintenance and low operating cost. |
| Multiple inlets and outlets: Pipe auger conveyor with multiple inlets and outlets can mix material and unload material at any points. |
Model | Screw Diameter | Screw Rotation Speed | Inclination Angle | Conveyor Length |
| (mm) | (r/min) | (degree) | (m) | |
| GX 200 | 200 | 20, 30, 35, 45, 60, 75, 90, 120, 150, 190 | < 20° | 3~70 |
| GX 250 | 250 | |||
| GX 300 | 300 | |||
| GX 400 | 400 | |||
| GX 500 | 500 | |||
| GX 600 | 600 |
| Material name :_______ |
| Material size :_______mm |
| Size distribution:_______%? |
| Material water content :_______%? |
| Material density :________t/m3? |
| Material temperature: _______ ºC |
| Material is corrosive or not:Yes______No______ |
| Distances between inlet and outlet ______m |
| Handling capacity________t/h |
| Upstream and downstream equipment :upstream_______downstream________ |
| Voltage __V__HZ 3 phase |
| Working environment :Indoor_______Outdoor_______ |