Products

Hanger Bolt Making Machine with Double Side Threading

China Hanger Bolt Making Machine with Double Side Threading, Find details about China Hanger Bolt Making Machine, Hanger Bolt Machine from Hanger Bolt Making Machine with Double Side Threading

Model NO.
LDJ-01
Customized
Customized
Advantage
Easy to Maintenance
Condition
New
Forging Station
3
Max. Diameter of Cutting off
12mm
Max. Length of Cutting off
180mm
Kick out Length
Max. 175mm
P.K.O Length
Max 30mm
Cutting Die Size
40 X 80mm
Main Die Hole
80 X 135mm
Dies Pitch
90mm
Punch Hole
50 X 130mm
RAM Stroke
250mm
Trademark
zhenhuan
Transport Package
Wooden Case
Specification
CE
Origin
Jiangsu
Model NO.
LDJ-01
Customized
Customized
Advantage
Easy to Maintenance
Condition
New
Forging Station
3
Max. Diameter of Cutting off
12mm
Max. Length of Cutting off
180mm
Kick out Length
Max. 175mm
P.K.O Length
Max 30mm
Cutting Die Size
40 X 80mm
Main Die Hole
80 X 135mm
Dies Pitch
90mm
Punch Hole
50 X 130mm
RAM Stroke
250mm
Trademark
zhenhuan
Transport Package
Wooden Case
Specification
CE
Origin
Jiangsu
Hanger bolt making machine with double side threading

Three Die Multi-station Cold Heading Machine
Hanger Bolt Making Machine with Double Side Threading

I Description of the machine
This machine is used for making no-standard parts.
II Main Features
1. The principal parts such as body frame, main ram, main link lever etc. all are made of high-strength material, however they are treated under strict casting technique, for instance, as stress relieving , in order to prevent deformation and machine rigidity can be promised as well as machine precision can be retained for long term.
2. Both main and auxiliary rams, all are made of abrasion resistant alloy, and the inside plates of the formers are made of imported quench alloy steel for letting the former keep on long term's precision and stability, the service life of the die can be prolonged.
3. Being equipped with air clutch with the advantage of low actuating current for operating the former in 3 modes such as Inching, Single Stroke and Continuous Running. The main ram can stop at its rear position automatically, when the former is operated under Single Stroke and Continuous Running modes for guaranteeing the safety of die and leaving the biggest space for operation and adjustment.
4. Pressing and feeding wire is actuated by pawl via the control of air cylinder;Wire cutting part is actuated by strong link-block system, he movement is stable and reliable, as well as by using circular shears for assuring the kerf clear and neat.
5. High accuracy main sliding block is designed to be connected with rear wing for letting it run stably and precisely,the bottom of front and back wing is adopted super wearing inserted copper plate,it can ensure accuracy and extend service life.
6. Each station of rear knock out device can be adjusted individually, and the last station can realize the action of knocking out trimmed product via adjusting the location of cam or changing different cam.
7. Front knock out part moves simultaneously with the retreat movement of the main ram, for letting the product temporarily stay at mold plunger, in order to prevent the plunger to be dragged away, then damage the product.
8. The swing of gripper is driven by conjugate cam,so the movement is reliable even at high speed return.
9. Main components for each part and all cams all are machined by numerically-controlled machine tools, for guaranteeing precision and the curve smooth and sliding.
10. Simple and convenient operating system, PLC is also used for automatically inspecting the working mode of the former with the functions of fault alarm.
III Main technical data
 
ItemData
Machine code 
Forging station3
Max. diameter of cutting off12mm
Max. length of cutting off180mm
Kick out lengthMax. 175mm
P.K.O lengthMax 30mm
Cutting die size40 x 80mm
Main die hole80 x 135mm
Dies pitch90mm
Punch hole50 x 130mm
Ram stroke250mm
Forging power85mm
Suitable of product sizeM10
Max. length of products150mm
Output100-120pcs/min
Main motor power22kW
Weight of machineAbout 13T
 
 
 

Double Head Thread Rolling Machine
Hanger Bolt Making Machine with Double Side Threading

I Description of the machine
This machine is specialized for clamp pins with two thread rolling heads.

II Main technical data
ItemData
Suitable screw diameter8-16mm
Producing speedAbout 45 pcs/min
Main driving power7.5kW
Machine dimension2500 x 1000 x 1500mm
Weight of machine1500kg
 Hanger Bolt Making Machine with Double Side Threading

Contacts: Cherie Mao
Phone: +86 13485105931

You Might Also Like