TPV strip taking advantage of plastic and rubber made in China for windows and doors

Rubber Strip for Glazing and Aluminum Profile

Material Available: EPDM, Silicone rubber, TPV, PCV, ect.

Extrusion Capabilities

Single Hardness Extrusions

Single hardness profiles are manufactured from a single material and can be flexible, rigid or rubber, which includes sponge based products.

Silicone Rubber Sealing Strip
1. Can bear high and low temperature with climate change.
2. The characteristics of high color fastness and splendid elasticity.
3. It can be used at -50ºC~200 ºC.
4. It is the best choice for the seal of doors and windows.

TPV Thermoplastic Sealing Strip
1. Excellent properties to resist against weathering and ozone.
2. Low compression deformation, good resistance to bending fatigue.
3. It can be thermally welded and used at -40ºC~120ºC.
4. The products are recyclable and environment-friendly.
5. Low density (0.96-1.00g/cm3) and cheaper.

TPV waterstop

Application for expansion joint

Co-Extrusion

Co-extrusion combines two different materials or colours into one single profile. Special twin head extruders and purpose made dies are used for this process. Usual materials are TPV-TPV, Sponge-Solid EPDM.

Triplex Extrusion

Triplex extrusion involves the extrusion of three different materials into one single profile. This involves highly complex machines and dies.

EPDM Sponge strip

EPDM Sponge Strip EPDM sponge (Ethylene Diene Monomer) is a closed cell sponge material that is ideally suited for use in outdoor and automotive applications. The main properties of EPDM sponge are its excellent resistance to ozone, UV and weathering, as well as its general resistance to abrasion.

Multi-cut strip

This kind of strip meets the demand of any angle installation, like the right angle.

Corner

The materials of making corner are EPDM, PVC, TPV, etc, and the profile matches up with the strip around the window.

Fireproofing strip

It can stop fire immediately with 10~20% expansion rate.

PVC Rubber Strip
1. The excellent anti-fastness from weather.
2. Best and reliable quality guaranteed by the production with advanced equipment.
3. It can be used normally at below zero in winter approved by repetitive tests.

Adopt embed base, easy installation, firm and stable.
Excellent weathering resistance, service life is more than 20 years in normal condition.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Applications
Applied on the edge of the window and door to prevent the rain , dirt, noise ,wind

Applications Standard
China standard: GB24498-2009, JG/T 386-2012

Technology service

Aluminum window rubber seal

(1)Proposal of rationalization will be showed according to the profile, drawings, samples that customers offer,
assist customer to perfect products design

(2)Provide the choice of proper material according customers' request, provide the pollution and compatibility
test between the customer's profiles and different materials of rubber strip

Installation Notice
Aluminum window rubber seal

(1) Before installation, compatibility test between rubber strip and coating profile is required

(2) Before installation, strips should be unpacked and put in room temperature over 24 hours

(3)Clean the parts where need installed rubber strip

(4)Some tooling and fixtures are required during installation, e.g.: rolling wheel, 90 degree angle knife, emollient
may require to speed up the installation, e.g.: Silicon oil, lye

(5)Don't pull strip to fit the profile, keep strip1~1.5% longer than structural material to prevent shrink in cold weather

(6)When meet corner, 45 degree cut off instead of completely cut off, and use proper adhesive or thermal welding for bonding.

Colors
White, black ,grey or other colors are available for TPV and Silicone strips.

Storage
No more than 12 months storing in dry and cool place.

Technical Data
Production technique:   Extrusion
Material:                           EPDM, PVC, rubber TPV, neoprene or customized
Hardness:                        65-85 shore A
Tensile elongation:        Above 250%
Tensile strength:            More than 8.0MPa
Craft technical:               Best vulcanization and Microwave curing