DIN1.2379 D2 SKD11 Cold Work Steel Bar (diameter 6-200mm)
China DIN1.2379 D2 SKD11 Cold Work Steel Bar (diameter 6-200mm), Find details about China Die Steel, Special Steel from DIN1.2379 D2 SKD11 Cold Work Steel Bar (diameter 6-200mm)
Basic Info.
Model NO.
DIN1.2379 D2 SKD11
Special Use
Mold Steel
Diameter
6-200mm
Length
3000-6000mm
Production Route
Ef/Eaf+Lf+Vd/ESR
Certificate
ISO/Mill Certificate
Delivery Time
For abundant stock, 15-20 days. For customized PRO
Heat Treatment
Annealing or Q+T
Trademark
CF STEEL
Transport Package
Standard Packing
Specification
mold steel
Origin
China
HS Code
72254
Model NO.
DIN1.2379 D2 SKD11
Special Use
Mold Steel
Diameter
6-200mm
Length
3000-6000mm
Production Route
Ef/Eaf+Lf+Vd/ESR
Certificate
ISO/Mill Certificate
Delivery Time
For abundant stock, 15-20 days. For customized PRO
Heat Treatment
Annealing or Q+T
Trademark
CF STEEL
Transport Package
Standard Packing
Specification
mold steel
Origin
China
HS Code
72254
Product Desciption
DIN1.2379 D2 SKD11 Cold Work Steel Bar (diameter 6-200mm)
Equivalent grades:
Chemical composition:
Introduction:
D2 steel is a high wear resistant micro deformation cold working die steel, belonging to air hardening tool steel. With high quality fraction of carbon and high chronic, the hardness can up to 60HRC after heat treatment, but malleability,toughness,rust resistance is not good and the surface of the steel is also difficult to be polished.
With the development of cold stamping products moving towards high accuracy,high efficiency,varieties, we require the mould steel should has good wear resistance and high toughness.
Compared with Cr12MoV steel, this D2 die steel adds Mo,V compositions,changed the steel cast structure, improved the morphology of ledeburite , toughness and wear resistance are better than Cr12MoV steel, improved the service life as well.Because of the yield point and plastic deformation resistance is higher than Cr12MoV steel, so that forging performance and hot molding properties are a little weak than Cr12MoV steel.
Hardness:
annealing ≤255HB, impression diameter≥3.8mm;
quenching ≥59HRC
D2 steel heat treatment regime:
quenching ,820±15ºC, preheat ,1000±6ºC(salt bath) or 1010±6ºC heating,
keep warm 10~20min, air cooling,200±6ºCtempering
Application:
1) used for freezer compressor rear cowl mould quenching hardening 56~58HRC.
2) because of V,Mo composition are higher than Cr12MoV steel, so that it has better combination property and will instead of Cr12MoVsteel gradually.
3) making cylindrical die roll,destage mixing pad cold punching mould and the service life is5-6 times longer than Cr12MoV steel.
Feature:
1. High high wear resistant;
2. micro deformation;
3. Long service life;
4. Good toughness;
5. high accuracy, high efficiency, varieties.
Available size(mm):
Delivery days:
For abundant stock, 7-15 days.
For customized products, 30-50 days.
Our service:
Products show:
Strict Quality Control
Loading Photo
FAQ:
Q: Are you a manufacturer or merely a trader?
A: We are trading company act as exporting Steel Products with our own factory,
we can manufacture the products as in cutomer's requirement,wholesale and retail all kinds of domestic mould steel,the price we offered is very competitive compared with other agents.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as SGS, CE,ISO if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival. Third,the products we export are mainly from ShaGang group, WenFeng group, XingCheng group, DongTe group,DaYe and so on, the quality are certained.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 30-50 days after receiving your prepayment or firm order.
Q: What is the payment term?
A:100% T/T or 30%T/T deposite prepaid, 70%Balance L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
Equivalent grades:
| GB | DIN | AISI | JIS |
| Cr12Mo1V1 | 1.2379 | D2 | SKD11 |
Chemical composition:
| C | Si | Mn | S | P | Cr | Ni | Cu | V | Mo |
| 1.40-1.6 | 0.6 | 0.6 | 0.03 | 0.03 | 11.5-13 | 0.25 | 0.30 | 1.00 | 0.70 |
Introduction:
D2 steel is a high wear resistant micro deformation cold working die steel, belonging to air hardening tool steel. With high quality fraction of carbon and high chronic, the hardness can up to 60HRC after heat treatment, but malleability,toughness,rust resistance is not good and the surface of the steel is also difficult to be polished.
With the development of cold stamping products moving towards high accuracy,high efficiency,varieties, we require the mould steel should has good wear resistance and high toughness.
Compared with Cr12MoV steel, this D2 die steel adds Mo,V compositions,changed the steel cast structure, improved the morphology of ledeburite , toughness and wear resistance are better than Cr12MoV steel, improved the service life as well.Because of the yield point and plastic deformation resistance is higher than Cr12MoV steel, so that forging performance and hot molding properties are a little weak than Cr12MoV steel.
Hardness:
annealing ≤255HB, impression diameter≥3.8mm;
quenching ≥59HRC
D2 steel heat treatment regime:
quenching ,820±15ºC, preheat ,1000±6ºC(salt bath) or 1010±6ºC heating,
keep warm 10~20min, air cooling,200±6ºCtempering
Application:
1) used for freezer compressor rear cowl mould quenching hardening 56~58HRC.
2) because of V,Mo composition are higher than Cr12MoV steel, so that it has better combination property and will instead of Cr12MoVsteel gradually.
3) making cylindrical die roll,destage mixing pad cold punching mould and the service life is5-6 times longer than Cr12MoV steel.
Feature:
1. High high wear resistant;
2. micro deformation;
3. Long service life;
4. Good toughness;
5. high accuracy, high efficiency, varieties.
Available size(mm):
| Flat Bar Size(mm) | Round bar Size(mm) | |||
| Thickness | Width | Length | Diameter | Length |
| 6-200 | 155-810 | 3000-6000 | 14-200 | 3000-6000 |
Delivery days:
For abundant stock, 7-15 days.
For customized products, 30-50 days.
Our service:
1, Sizes, materials and others are all at your requirements and can be changed;
2, Price varies on materials, dimensions, finish craft and different payments;
3, We are direct manufacture in machinery manufacturing work with experience of several decades;
4, Detail production design will be made according to information you offered;
5, We have adequate inventory, so that we can quick delivery;
6, The most important is that we have advanced equipment.
Products show:
Strict Quality Control
Loading Photo
FAQ:
Q: Are you a manufacturer or merely a trader?
A: We are trading company act as exporting Steel Products with our own factory,
we can manufacture the products as in cutomer's requirement,wholesale and retail all kinds of domestic mould steel,the price we offered is very competitive compared with other agents.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as SGS, CE,ISO if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival. Third,the products we export are mainly from ShaGang group, WenFeng group, XingCheng group, DongTe group,DaYe and so on, the quality are certained.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 30-50 days after receiving your prepayment or firm order.
Q: What is the payment term?
A:100% T/T or 30%T/T deposite prepaid, 70%Balance L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
You Might Also Like
30-50cbm Movable Hopper for Discharging Bulk Cargo
4b-Wd Bsp Male ED Sealing Plug
Standard Specimen Clamp for Microtome
Luxury Crystal Glass Scent 30ml 1 Oz Perfume Bottle
Tetra Pak Sugar Dissolving System
High Quality Factory Supply Zinc Plated Pozi Countersunk Chi......
Improve Root System Root Promoter Seaweed Functional Organic......
Creative Handmade Three-Dimensional Photo Frame Outside Thic......
Jinko Panel High Quality Pmw Dimming Controller Ni-MH Batter......
80/20 Copper Nickel ( CuNi20 )
Natural Blue Gemstone Stone Oval Vanity Hotel Wash Basin Sin......