The felt suction box includes a box body, on which a dehydration panel is arranged, and the dehydration panel includes a bottom supporting plate.
On the bottom supporting plate, a strip base with fixed spacing distribution and parallel to each other is arranged; a dewatering hole is arranged between two adjacent strip bases; two ends of the dehydration hole are equipped with a pull-out sealing strip; a middle seat is arranged on the strip base; the middle seat is connected with the strip base through a T-shaped structure; and the middle seat is provided with a wear-resistant strip The wear strip is connected with the middle seat through dovetail structure, and the wear strip is made of silicon nitride.
We have single slot felt suction box,double slot felt suction box and three slot felt suction box for you choose.

The felt is an important dehydration part of paper machine. In the process of papermaking, the fine fibers, fillers, rubber and other materials in the paper are easy to adhere to the felt, resulting in the blockage of the pores of the felt, which affects the water absorption and filtration of the feltt.

In order to make the felt recycled, a felt suction box is set up in the return journey of the felt. The water and blockage are removed through the water suction box, so that the pores of the felt are unblocked.

The contact area between the dewatering panel of the original felt suction box and the felt is provided with a wear-resistant layer, which is made of alumina ceramic, glass and other materials. After being used for a period of time, the smoothness of these wear-resistant layers decreases due to wear, resulting in increased friction and damage to the felt. And the wear-resistant layer is fixed on the dehydration panel as a whole, and its replacement is more complicated.

The wear-resistant silicon oxide material we use has the advantages of lubricity and low friction coefficient. When used, it can greatly reduce the friction between blanket and dehydration panel, reduce the mutual wear between them, prolong the service life and reduce the production cost.

1.New Material (A₂LO₃ZrO₂Si₃N₄)
2.Low friction Coefficient
3.Stable Structure
4.High-Strength matrix of fiber glass/carbon fiber
5.Firmly fixed structure
6.Easy to replace
7.Low adhesive rate for mixtures
8.Movable bar
9.Effectively protect felt
 

1. Forming board: The forming board is the first element under the net of the chest roller of the paper machine, which plays the role of water removal to support the net and control the net section. The box is made of stainless steel, the substrate is super high molecular polyethylene or glass fiber reinforced plastic, and the panel is inlaid with ceramic
2. Scraper Blades: Scraper Blades of various widths and forms are available to suit different requirements. Wiper plates are made of ceramic in various forms, with a 0-3 degree rear Angle. The transition bottom plate adopts the modern special treatment material FRP composite material, one - time molding. No processing, no deformation, accurate size, easy to paste.
3. Vacuum suction box: It is a kind of device that uses the high pressure difference inside and outside the box to enhance dehydration. The dryness of the wet paper is about 2 ~ 3% before passing through the vacuum box, and it can reach 10 ~ 14% after passing through the vacuum box, and the paper tightness is also increased.

Wooden case or as customers' requests.

Xuzhou sunhong International Trading Co., Ltd. was established in 2010, mainly engaged in the import and export business of industrial textiles and paper machinery parts.The company's business has been successfully expanded to South America, Southeast Asia, Central Europe.At the beginning of its establishment, the company is positioned at technology-based products, high-quality products and intimate additional services is our consistent commitment to customers.The company adheres to the flexible and humanized management and provides a diversified platform for your development. We sincerely look forward to your joining!