Roller Conveyor Type Polishing Brick Shot Blasting Machine, Stone Material Surface Treatment Equipment
China Roller Conveyor Type Polishing Brick Shot Blasting Machine, Stone Material Surface Treatment Equipment, Find details about China Shot Blating Machine, Cleaning Machine from Roller Conveyor Type Polishing Brick Shot Blasting Machine, Stone Material Surface Treatment Equipment
Basic Info.
Model NO.
Q69
Trademark
Dexu
Origin
Qingdao
HS Code
842430000
Model NO.
Q69
Trademark
Dexu
Origin
Qingdao
HS Code
842430000
Product Desciption
Introduction
Q69 shot blasting machine consists of automatic load and unloading system (Optional), roller conveyor system (Input roller, output roller and inside roller), blasting chamber (chamber frame, protection linear, shot blasting turbines, abrasive supply device), abrasive circulation system (Separator, bucket elevator, screw conveyor), abrasive collection unit (Customized), dust collection system and electric control system.
Q69 shot blasting machine is mainly used for surface treatment (preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts.
Technical parameter
Features
1.This Steel structure shot blasting machine use high speed cantilever centrifugal type turbine blast wheels. Curve blades blast wheel has more blasting force to process steel products.
2.Material of blades, abrasive distributor, and control cage is high chrome, which can be used over 500 hours. Another option is Taiwan made special material blades, which has 1000-1500 hours lifetime.
3.Blasting cabinet liner material is cast Manganese steel 13, which has good hardness and impact force absorbing ability, which makes its life longer than one year. Another option is rolled Manganese steel, which has life more than two years.
4.Roller conveyor is controlled by frequency converter, which can adjust moving speed to fit for different blasting purpose.
5.Full shutter type air wash separator has three steps separating, which effectively separate dust and abrasive. It is good for abrasive recycle, improve cleaning effect and protect the machine.
6.Blowing nozzles are used at end of chamber to blow off the remaining steel ball and dust.
7.Pulse jet bag type dust collector, dust remove efficiency is over 99%. Good for environmental protection. Cartridge type dust collector is optional.
8.Safety protection, electrical interlock, failure self detection and alarming function. Full range of automatic control.
9.ABB motor, SEW gear box, SKF/NSK bearings, SIEMENS/Mitsubishi PLC, Mitsubishi/SIEMENS touch screen, Schneider electric components are optional selection.
Advantage
1.Improve the corrosion resisting ability of machinery products and metal materials
2.Improve bonding strength of steel surfaces and coatings.
3.Increase the anti-fatigue capability of metal products and extend its life.
4.Optimize the craftwork state of steel surface.
5.Greatly enhance the efficiency of cleaning.
6.Reduce the labor intensity of cleaning works.
7.Reduce the environment pollution.
Notice
According to your requirements, the most suitable machines will be designed for your work piece, please indicate the following details.
A. What kind of work piece will you clean?
B. The work piece size, length, width, height and weight of maximum workpiece.
C. How many work pieces you want to clean per month?
Based on above detail information, the detailed technical proposals will be sent to you for reference.
Cleaning effect
FAQ
a.What is your parts going to be blasted?
It is better you tell us the parts going to be blasted, then we can select the suitable machine for you.
b.What is the max and min dimension of your parts?
Yes, if you can let us know the dimension, we can design proper shot blasting machine size for you to reduce the investment money.
c.How many pieces of your parts blasted per day in 8 hours?
Yes, according to your productivity requirement, we design suitable capacity machine for you.
d.What is the lead time of our shot blasting machine?
For small machines, usually we have stock in factory.
Big machines, the lead time is usually 45 to 60 days.
e.Are the machine tested before shipping?
Yes, all of our machines are tested before shipment.
f.What's your quality guarantee?
Quality guarantee time is one year.
g.Are you able to give Installation and commissioning overseas ? How long will it take?
Yes, we supply overseas service, but customer needs to pay for the engineers flight tickets and hotel, food.
Small machine usually takes 2 to 4 days.
Big machine usually takes 20-25 days.
Company Information:
Qingdao DEXU machinery company was established in 2012,covering area nearly 17000square.
We focus on various series shot blasting machinery,sand casting equipment, construction machinery, rubber machinery, machinery spare parts and other industrial research and development.
The company has passed ISO9001,CE and BV certification.
We have many customers in China, Australia, India, South Africa, Tanzania, Nepal, Armenia and other countries and founded agents.
We sincerely looking forward to corporate with you and you company.
WELCOME TO VISIT OUR FACTORY IN QINGDAO !
Q69 shot blasting machine consists of automatic load and unloading system (Optional), roller conveyor system (Input roller, output roller and inside roller), blasting chamber (chamber frame, protection linear, shot blasting turbines, abrasive supply device), abrasive circulation system (Separator, bucket elevator, screw conveyor), abrasive collection unit (Customized), dust collection system and electric control system.
Q69 shot blasting machine is mainly used for surface treatment (preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts.
Technical parameter
| Technical parameter of pass-through type shot blasting machine Q69 | |||||||||
| No. | Model Item | Q698 | Q6912 | Q6915 | Q6920 | Q6925 | Q6930 | Q6940 | |
| 1 | Width of work piece | mm | 800 | 1200 | 1500 | 2000 | 2500 | 3000 | 4000 |
| 2 | Size of inlet opening | mm | 800* 1600 | 1200* 400 | 1500* 400 | 2000* 400 | 2500*800 | 3000*800 | 4000*400 |
| 3 | Length of work piece | mm | 1200- 12000 | 1200- 6000 | 1200- 12000 | 1200- 12000 | 3000-12000 | 2400-12000 | 4500-18000 |
| 4 | Roller speed | m/min | 0.5-4 | 0.5-4 | 0.5-5 | 0.5-4 | 0.5-4.5 | 0.5-4 | 2-8 |
| 5 | Thickness of plate | mm | 3-60 | 3-60 | 1.5-60 | 3-60 | 3-60 | 3-110 | 4.5-110 |
| 6 | Abrasive flow rate | kg/min | 8*120 | 4*250 | 4*250 | 6*250 | 6*250 | 6*360 | 8*360 |
| 7 | Abrasive initial fill | kg | 4000 | 4000 | 4000 | 4500 | 4500 | 8000 | 11000 |
| 8 | Adjusting height of rolling brush | mm | 400 | 200 | 350 | 450 | 600 | 850 | 900 |
| 9 | Ventilation capacity | m3/h | 22000 | 17560 | 19000 | 19550 | 27758 | 28050 | 38000 |
| 10 | Total power of shot blast machine (no dust collector) | kw | 90 | 78.3 | 113.6 | 156.6 | 224.55 | 204.8 | 293.6 |
Features
1.This Steel structure shot blasting machine use high speed cantilever centrifugal type turbine blast wheels. Curve blades blast wheel has more blasting force to process steel products.
2.Material of blades, abrasive distributor, and control cage is high chrome, which can be used over 500 hours. Another option is Taiwan made special material blades, which has 1000-1500 hours lifetime.
3.Blasting cabinet liner material is cast Manganese steel 13, which has good hardness and impact force absorbing ability, which makes its life longer than one year. Another option is rolled Manganese steel, which has life more than two years.
4.Roller conveyor is controlled by frequency converter, which can adjust moving speed to fit for different blasting purpose.
5.Full shutter type air wash separator has three steps separating, which effectively separate dust and abrasive. It is good for abrasive recycle, improve cleaning effect and protect the machine.
6.Blowing nozzles are used at end of chamber to blow off the remaining steel ball and dust.
7.Pulse jet bag type dust collector, dust remove efficiency is over 99%. Good for environmental protection. Cartridge type dust collector is optional.
8.Safety protection, electrical interlock, failure self detection and alarming function. Full range of automatic control.
9.ABB motor, SEW gear box, SKF/NSK bearings, SIEMENS/Mitsubishi PLC, Mitsubishi/SIEMENS touch screen, Schneider electric components are optional selection.
Advantage
1.Improve the corrosion resisting ability of machinery products and metal materials
2.Improve bonding strength of steel surfaces and coatings.
3.Increase the anti-fatigue capability of metal products and extend its life.
4.Optimize the craftwork state of steel surface.
5.Greatly enhance the efficiency of cleaning.
6.Reduce the labor intensity of cleaning works.
7.Reduce the environment pollution.
Notice
According to your requirements, the most suitable machines will be designed for your work piece, please indicate the following details.
A. What kind of work piece will you clean?
B. The work piece size, length, width, height and weight of maximum workpiece.
C. How many work pieces you want to clean per month?
Based on above detail information, the detailed technical proposals will be sent to you for reference.
Cleaning effect
FAQ
a.What is your parts going to be blasted?
It is better you tell us the parts going to be blasted, then we can select the suitable machine for you.
b.What is the max and min dimension of your parts?
Yes, if you can let us know the dimension, we can design proper shot blasting machine size for you to reduce the investment money.
c.How many pieces of your parts blasted per day in 8 hours?
Yes, according to your productivity requirement, we design suitable capacity machine for you.
d.What is the lead time of our shot blasting machine?
For small machines, usually we have stock in factory.
Big machines, the lead time is usually 45 to 60 days.
e.Are the machine tested before shipping?
Yes, all of our machines are tested before shipment.
f.What's your quality guarantee?
Quality guarantee time is one year.
g.Are you able to give Installation and commissioning overseas ? How long will it take?
Yes, we supply overseas service, but customer needs to pay for the engineers flight tickets and hotel, food.
Small machine usually takes 2 to 4 days.
Big machine usually takes 20-25 days.
Company Information:
Qingdao DEXU machinery company was established in 2012,covering area nearly 17000square.
We focus on various series shot blasting machinery,sand casting equipment, construction machinery, rubber machinery, machinery spare parts and other industrial research and development.
The company has passed ISO9001,CE and BV certification.
We have many customers in China, Australia, India, South Africa, Tanzania, Nepal, Armenia and other countries and founded agents.
We sincerely looking forward to corporate with you and you company.
WELCOME TO VISIT OUR FACTORY IN QINGDAO !
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......