China Standard Replacement Mining Pumps with Open Impeller (150E-L), Find details about China High Head Slurry Pumps, High Head Pumps from Standard Replacement Mining Pumps with Open Impeller (150E-L)
Design | Continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements and can be applied Multi-staged in series. |
Outlet installation | The positions of the pump outlet can be positioned at an interval of 45° according to different requirements. |
Wet end parts | Both metal or rubber liners and impellers, or a combination of both, are interchangeable within the same pump to facilitate use. |
Seals | L cantilever, horizontal and centrifugal pump shafts can be sealed by packing seals or centrifugal type seals. |
Maintenance | A removable cartridge type grease lubricated bearing assembly can be replaced with the pump base in-situ. |
Special material | Polyurethane, stainless steel, Hastelloy 276-C, ceramic and various hard wearing alloys are available on request. |
Type | Max. Power Kw | Clear Water Performance | Impeller | Application | |||||
Capacity m³/hr | Head/m | Speed/rpm | Efficiency % | NPSH m | Nos of Vane | Diameter mm | |||
20 A-L | 7.5 | 2.34-10.8 | 6-37 | 1400-3000 | 30 | 3.5-8 | 4 | 152.4 | -Ball mill discharge |
50 B-L | 15 | 16.2-76 | 9-44 | 1400-2800 | 55 | 3.5-8 | 5 | 190 | -Coarse tailings |
75 C-L | 30 | 18-151 | 4-45 | 900-2400 | 57 | 3-6 | 4 | 229 | -Rod mill discharge |
100 D-L | 60 | 50-252 | 7-46 | 800-1800 | 60 | 2-3.5 | 4 | 305 | -Coal washing |
150 E-L | 120 | 115-486 | 12-51.5 | 800-1500 | 65 | 2-6 | 4 | 381 | -Wet crushers |
200 E-L | 120 | 234-910 | 9.5-40 | 600-1100 | 64 | 3-6 | 4 | 457 | -Phosphate matrix |
250 F-L | 120 | 396-1425 | 8-30 | 500-800 | 77 | 2-10 | 5 | 550 | -Minerals concentrate |
300 S-L | 560 | 468-2538 | 8-60 | 400-950 | 79 | 2-10 | 5 | 653 | -Lime grinding |
350 S-L | 560 | 650-2800 | 10-59 | 400-840 | 81 | 3-10 | 5 | 736 | -FGD waste water |
400 ST-L | 560 | 720-3312 | 7-51 | 300-700 | 80 | 2-10 | 5 | 825 | -Flotation |
450 ST-L | 560 | 1008-4356 | 9-48 | 300-600 | 80 | 2-9 | 5 | 933 | -Process chemical |
550 TU-L | 1200 | 1980-7900 | 10-50 | 250-475 | 86 | 4-10 | 5 | 1213 | -Pulp and paper |
20 A-LR | 7.5 | 2.16-9 | 7-32 | 1600-3000 | 30 | 3 | 152.4 | -Ni acid slurry | |
50 B-LR | 15 | 12.6-60 | 6-38 | 1200-2600 | 48 | 3 | 190 | -Coarse sand | |
75 C-LR | 30 | 22-144 | 9-43 | 1000-2200 | 60 | 3-5 | 4 | 229 | -Heavy media |
100 D-LR | 60 | 61-252 | 17-70 | 800-1600 | 65 | 2-5 | 6 | 305 | -Bottom/fly ash |
150 E-LR | 120 | 137-486 | 12-51.5 | 800-1300 | 65 | 2.5-5.5 | 5 | 381 | -Oil sands |
200 E-LR | 120 | 216-990 | 9.5-40 | 500-1100 | 74 | 5 | 457 | -Mineral sands | |
250 F-LR | 260 | 324-1314 | 8-30 | 500-800 | 70 | 5--10 | 5 | 550 | -Fine tailings |
300 S-LR | 560 | 432-1900 | 7-41 | 400-800 | 81 | 3-8 | 5 | 653 | -Phosphoric acid |
350 S-LR | 560 | 720-2844 | 10-41 | 400-700 | 86 | 3-7 | 5 | 736 | -Coal |
400 ST-LR | 560 | 756-3312 | 7-37.5 | 300-600 | 85 | 2-8 | 5 | 825 | |
450 ST-LR | 560 | 1080-4356 | 9-40 | 300-550 | 87 | 3-10 | 5 | 933 | |
650 U-LR | 2000 | 2520-9108 | 10-39 | 200-350 | 86 | 2-8 | 5 | 1370 | |
750 UV-LR | 2000 | 3240-13860 | 8-41 | 150-300 | 86 | 2-8 | 5 | 1643 |
AH(R) | L(R), M | HH | SP(R) | G | AF Series |
1.5/1B-AH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G | 2QV-AF |
2/1.5B-AH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 3QV-AF |
3/2C-AH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF |
4/3C-AH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G | 8SV-AF |
6/4D-AH(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G | |
6/4E-AH(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G | |
8/6E-AH(R) | 10/8 R-M | 6S-H | 14/12T-G | ||
8/6R-AH(R) | 10/8 E-M | 8/6S-H | 16/14 G-G | ||
10/8F-AH(R) | 8/6X-H | 16/14TU-GH | |||
10/8X-AH(R) | 6S-HP | 16/14H-GH | |||
12/10ST-AH(R) | 8/6S-HP | 18/16G-G | |||
14/12ST-AH(R) | 8/6X-HP | 18/16TU-GH | |||
16/14TU-AH(R) | |||||
20/18G(TU)-AH(R) |