Pile Foundation Inspection Static Loading Pile Tester

China Pile Foundation Inspection Static Loading Pile Tester, Find details about China Pile Test, Loading Tester from Pile Foundation Inspection Static Loading Pile Tester

Model NO.
slpt
Trademark
SAMYON
Origin
Cn
HS Code
9031809090
Model NO.
slpt
Trademark
SAMYON
Origin
Cn
HS Code
9031809090
Automatic Static loading pile testing system
Pile Foundation Inspection Static Loading Pile Tester
Pile Foundation Inspection Static Loading Pile Tester
Pile Foundation Inspection Static Loading Pile Tester


Parameter
1) The host adopts 10.4inch touch screen and high brightness colorful LCD, the operator can operate it easily by hand or touch pen
2) The host adopts 24bit high precision AD resolution.
3) The operation is very easy. After simple training, the operator can operate this instrument to do the testing easily on-site.
4) The power supply is 12V DC, not 220V, to keep the instrument with high stability and anti-interference ability.
5) All the testing information, Q~S curve, S~lgt curve, the displacement and pressure data of every channel will be shown on the screen directly.
6) It can set the grading series, and every grade loading size, time and so on.
7) All the testing and data collection is automatic: pressuring, pressure balancing, reading, stability judging and data storage.
8) Automatic alarm function: The instrument will be automatic alarm and provide the self-protection when some emergency situation is happened, such as loading time is too long, settling volume is too big, differential settlement is too big, displacement meter has less displacement range, and so on.
9) The data in the sensor can be transferred to the host through wireless or wire method. The communication distance can reach 500~1000m through wireless method.
10) The wireless channels can be up to 50pcs. It can support more than one set instrument (up to 50sets) to do testing through wireless method in one project.
11) If the power is suddenly off, and then the power turns on after a few minutes, the instrument can automatically continue testing without manual intervention.
12) The instrument can support two installation methods for the sensor: (1)Traditionally install on the pile body;(2) Install on the datum line beam. If installing the sensor on the datum beam, it can utmost avoid the sensor immersing into the water during the raining days.
13) The data can be exported through U-disk

3.Main technical items.
3.1 Load Testing.
Oil pressure testing channel: 1pc      
Pressure range:  0~80MPa.Load pressure value is related to jack value and parallel numbers. Pressure range is from 0 to infinite.
   Precision:       0.25%FS
   Resolution:      0.01%FS
3.2 Displacement testing.
Displacement channels:   6pcs.
Range:                 0~50mm(Single),-1000~+1000mm(Multi time)
   Precision:              0.01 mm
Linearity:               ±0.075%
   Resolution:              0.001 mm
Temperature:          -30oc~+100oc
3.3 Load controlling
Channel:                  1pc
   Load overshoot             Optional by clients.
Maximum controlling power:  7 kV
3.4 Console data storage:  More than 1000 pcs pile data
3.5 work temperature:   0~40oc long time continuously working.
3.6 Console power      DC:16~22V,Power≤15W
3.7 Testing distance:    30m with line; upto 1500m wireless type(wild area.)
 

Instrument system
ItemNameSpecificationUnitQuantity
1Hostwireless/traditional typeset1
2Control cabinetDisplacement 6channelsset1
3Electronic displacement sensorMeasuring range: 50mm, precision: 0.01 mmpc4
4Oil pressure sensor80MPa, precision 0.25%FSpc1
5Wireless communication antenna3mpc2
6Wire communication cable30mpc1
7380V input power line/pc1
8380V output power line/pc1
9Touch pen/pc1
10Analysis software/set1
11ManualInstrument and analysis software operation manualset1
12U-diskWith the software and manual insidepc1
13Certification/Pc1
14Warranty card/pc1
Pile Foundation Inspection Static Loading Pile Tester
Pile Foundation Inspection Static Loading Pile Tester