machine part and configuration:

Our machine advantage :

Cutting roller

We use the chrome steel to cover the rubber roller both sides .So that the rubber is not crack from side after extended periods use.

Traction roller

We use the silicone rubber materials instead of the butyronitrile materials .The  silicone rubber materials is good abrasion resistance and will not crack .

PLC touch screen

We use DELTA group brand PLC touch screen .

Mask nose strip tension controller

We use Mask nose strip tension controller .This device can avoid the nose strip differ in length .

Nose strip straight- feeding device

We use Nose strip straight- feeding device ,
It can ensure the nose strip be feeded straightly in the processing, so the finished mask will be flat and artistic.

Non woven raw materials sensors

We use Non woven raw materials sensors,once the raw materials use up,machine will stop automatically 

Raw materials tension controller 1

We use the Raw materials tension controller to avoid the materials plugging  .

Raw materials tension controller 2

Our machine is equipped with two braking ways . One is belts pressing and another is screw fixing . You could choose either one or use both according to your need.

Raw materials EPC device

We use raw materials EPC device ,to do materials adjustment.

Machine door lock

We just door lock ,with out the key,worker can not start the machine.
 
Prices are subject to change for reference only

You need to buy Ear loop, one layer non woven fabric , middle layer is melt blown fabric ,one layer non woven fabric, Nose holder. 
Ear loop is about 10-12 USD/KG 
Nonwoven 20g is about 2.3-3 USD/KG 
Nonwoven 25g is about 2.3-3 USD/KG 
Meltblown Fabric(normal level) is about 55-60USD/KG 
Meltblown Fabric(Medicine level) is about 58-65USD/KG