China Competitive Price Peat Soil Dryer Drying Unit Machine, Find details about China Dryer Machine, Peat Rotary Dryer from Competitive Price Peat Soil Dryer Drying Unit Machine
Peat roller dryer, also known as paddle-rotary drum dryer, rabble-type rotary drum dryer, rotary rake dryer, rotating paddle drum dryer, the machine is to retain the ordinary roller. Based on the advantages of the dryer, it can not be adapted more than 50% moisture, weak adhesion, drying of adhesive materials, and the disadvantage of low evaporation per unit area and high fuel consumption due to the phenomenon of "black hole" in the center of the drum. Increasing stirring high-speed rotating blades, increasing the crushing and dispersing function of the material, fill the center of the drum "black hole", the material surface area fully expanded, and full contact with the hot air to evaporate the material moisture because the material particles are minimized, heat transfer evaporation water velocity raised dramatically. After many of production, practice result provided, that the peat drum dryer than ordinary drum dryer, water evaporation capacity per unit area of 25-60kg water / m2 · h, is 1-2 times the ordinary drum dryer, the same size drying Machine capacity increased by more than 50%, fuel energy consumption was reduced by more than 30%, equipment occupied an area of more than 40%, and moisture content of the dried material was more uniform and efficiency increased by more than 40%. It is suitable for peat, sludge, bean dregs, starch slag, sauce residue, spray corn husk, cassava slag, brewer's grains, distillers' grain, straw, grass, organic fertilizer, chicken cow dung, and other moisture about 50-85% high humidity material drying. The company can optimize the drying process technology design according to the characteristics of each biomass material, output size, application requirements, cost control, degree of automation, on-site conditions.
1. It can realize intelligent control, one-button operation, automatic control of operating parameters, the dryer always running in the best status, to ensure that the drying out of the material moisture is uniform and stable.
2. The built-in stirring paddle device stirs and crushes the material completely. The heat exchange between the material and the hot gas material is sufficient. The unit production capacity of the equipment increased more than 50%, and the energy consumption of the fuel reduced by more than 30%.
3. With four-wheel drive, the transmission is more stable, safe, and reliable.
4. Comparing with the drum dryer, it reduced the floor area by about 40%, civil engineering investment decreased by about 40%, equipment investment decreased by 20%.
5. The internal structure of the dryer adopted a variety of high-efficiency combination modes of lift plate to effectively regulate the drying process and heat distribution, and the heat utilization rate is high. The discharge temperature of exhaust gas is lower than 50°C.
6. The use of frequency conversion to regulate the flow parameters such as material flow, hot air supply, and drum rotation speed can easily control the final moisture index and equipment productivity according to the needs of users.
7. Modular dust collection, dust purification heat recovery configuration, safety, and environmental protection
8. Supporting a variety of energy-saving new hot air furnaces, high-efficiency, energy-saving, controllable heating, simple operation, energy consumption reduced by 30%, power consumption reduced by 20%, and operating costs get lower.
Drying Process
The flowchart of material: Moisture content is about 50-65% and peat is fed by a screw conveyor into a rotary drum dryer to achieve downstream drying. The materials are continuously picked up and scattered under the copying board, and the materials are scattered and spirally advanced. The inner of the dryer has a stirring blade device that will make the material fully stirred, break up, and beat, and the material and the hot gas are fully in heat exchange. The moisture quickly evaporates and vaporizes. The material that achieves the drying effect quickly moves out of the drum under the action of hot air. The wet material that does not reach the drying effect that cannot travel fast due to its own weight, and the material inside of the drum is fully dried to achieve a drying effect, and the drying process is completed and discharged from the screw conveyor. Inside the drum has a shock cleaning device to prevent the material from sticking to the wall.
The flowchart of gas: the air is heated by the hot air furnace of the draught fan and enters the hot air furnace to burn and get heated, the temperature reaches 600-850°C. After the dryer, the induced draft fan draws the material in the dryer to dry, evaporate water, pass the three-layer heat exchange, and the wind temperature reduced to 55-60°C and discharged from the dryer. The dust containing wet dust passes the cyclone dust collector and the wet dust collector gets to the emission standards.
Model | Capacity(t/d) | Early Moisture(%) | Final Moisture(%) | Total Power(kw) | Area(m2) |
JTMG1916 | 300 | 65±5 | 15%(adjustable) | 109 | 7*25 |
JTMG2218 | 500 | 128 | 8*30 | ||
JTMG2518 | 700 | 143 | 8*30 | ||
JTMG2818 | 1000 | 210 | 8*40 | ||
JTMG3422 | 1500 | 320 | 10*45 | ||
JTMG4032 | 2000 | 460 | 12*60 |
Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients' productivity, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.
At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.