JC-CZ31 Diffusion Silicon Temperature and Pressure Integrated Sensor Introduction
JC-CZ31 is a temperature and pressure integrated sensor developed based on JC-CZ11 series. In terms of pressure, the series is packaged by pressure chips from internationally renowned manufacturers. The external pressure is transmitted to the sensitive components through 316L stainless steel diaphragm and internal filling silicone oil, which can be used to measure all pressure media compatible with 316L stainless steel.
In terms of temperature, we have buried a high-precision PT100 platinum resistance in the stainless steel pedestal, and potting the thermal adhesive at the gap between the platinum resistance and the stainless steel casing, greatly reducing the temperature conduction hysteresis when the platinum resistance is not in direct contact with the medium.
Each sensor was strictly temperature compensated for both zero and span. It provides two power supply options: constant current and constant voltage.

JC-CZ31 Diffusion Silicon Temperature and Pressure Integrated Sensor Features
*High stability, high precision Pressure range:0-40Kpa…7Mpa    
*Wide operable temperature range -40-125ºC  
*Compatible with corrosive media (compatible with 316L)    
*Standard package size Typical output:0-100mV


Technical Parameters:

Note:
The electrical connection is based on the connection marked on the product parameter card.
1. Dashed left arrow resistance bridge circuit for the sensitive chip bridge.
2 without ceramic compensation board, an external resistor to compensate for zero and temperature drift, the connection as shown. Access to zero resistance R3 (R4), another resistor R4 (R3) shorted as negative power supply; R1 or R2,only one for the zero temperature drift compensation resistor, the another one opens, Choose according to the information provided by the parameter card; R5 is for the sensitivity of temperature compensation resistor, it is recommended that the external compensation resistor be as close as possible to the pressure sensitive element.


About Jiucheng

Qualification and Certificate


Product Packaging:
We choose cartons and protective pads that can be recycled. This will maximize the protection of our products from damage during transportation.


Product Transportation:
We only choose the global express service providers. We will deliver the goods to you at the most efficient speed.