China 35kv 2000j 4UF High Surge Voltage Tester Signal Generator Locator for Cable Fault, Find details about China High Voltage Locator for Cable Fault Locator, 35kv Cable Fault Locator Surge Generator from 35kv 2000j 4UF High Surge Voltage Tester Signal Generator Locator for Cable Fault
Output surge voltage | 0~32KV, Continuously variable |
Max. power energy | 1000J |
Energy-storage capacitor | 2μF |
Power | AC 220V.50Hz |
Volume | 400mm×460mm×300mm |
Weight | 25 kgs |
Operating Temperature | -10ºC-40ºC |
Humidity | 5-90%RH |
Elevation | <4500m |
1 | AC220 port: 220V,50Hz power,above 2kw |
2 | Power indicator: when device power on the indicator light |
3 | HV closed/separated: when device power on, the HV circuit is still not work.Only adjust the knob to ZERO position and then press HV closed/separa ted button, the HV circuit will work. HV closed indicator light and do HV output. When device under the HV output status,press HV closed/separated button, the HV circuit will stop work and HV separated indicator will light and meanwhile to discharge the electric charge in built-in HV capacity and tested cable. Only to adjust the knob to the ZERO position press HV closed.separated button to start HV circuit work again. |
4 | HV closed indicator: bright when HV circuit work |
5 | HV separated indicator: bright when HV circuit stop working |
6 | HV adjust knob: adjust the output voltage according tested cable HV withstand voltage |
7 | Voltage indication: LED to display the output voltage. When do one HV impact,if the LED display big value,it means the faulty point is breakdown,if small value,the faulty points is not breakdown. |
8 | Discharging mode : three different modes of DC,Single and period. DC is for flashover fault pre-location and common match with the HV adjustment. Single is for HV resistance fault pre-location. Press Single button to do one time discharge. Period is for pinpointing. When under this mode,the device will auto discharge according the set time period. Default is 5 seconds. |
9 | Single discharge button: when device under the Single mode,press this button to do one discharge and signal output. It is valid when other mode. |
Company introduction
Contact:
Grewin.Alice
Tianjin Grewin Technology Co.,Ltd.
Web:transformer.en.made-in-china.com