Engine Check Functions / OBDII Modes:  

1.Reading Codes: Shows the detailed description of the Diagnostic Trouble Code (DTCs).

2.Erasing Codes: Turns off the Check Engine Light (MIL) after diagnosis, clears codes and resets monitors. 

3.Read Live Data Stream: Shows the information of continuous ECU/PCM data stream from a vehicle in live graphic (waveform) display.

4.View Freeze Frame Data: Checks the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

5.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.

6.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.



Supports 7 Kinds of OBDII protocols:
1.ISO9141-2(5 baud init,10.4Kbaud)
2.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
3.ISO14230-4 KWP(fast init,10.4 Kbaud)
4.ISO15765-4 CAN(11bit ID,500 Kbaud)
5.ISO15765-4 CAN(29bit ID,500 Kbaud)
6.ISO15765-4 CAN(11bit ID,250 Kbaud)
7.ISO15765-4 CAN(29bit ID,250 Kbaud)

Vehicle Model Coverage:
(Note: EDIAG P03 only Support 12V Gasoline/petrol cars, Does not support 24V Diesel vechicles or Truck )
 
American Car :
Need Standard OBDII Protocols from 2000 to now
for Chrysler , for Ford, for GM, For Jeep ...


European Car :
Need Standard OBDII Protocols from 2003 to now
For Alfa romeo , for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Renault
For Bentley , for Skoda , for Daewoo , for Benz , for Daihatsu , for Land Rover , for BMW , for Vauxhall , for Citroen , for Volvo , for Fiat , for VW , for Ford , for Jaguar...


Japanese/Korean Car :
Need Standard OBDII Protocols from 2006 to now
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota...
 

Bluetooth 3.0 version-----supports Android phone/PC----connect via bluetooth.
It CAN NOT work on IOS, if you need an item which work on IOS, pls buy our WIFI EDIAG P03.

For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC ( Data Link Connector ) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant

This hardware can match much other software still! But most of them are not free!
Works for Windows98/ME/2000/XP/Vista & 7!
This tool does not match ABS and airbag system!
 

Connection Failure selfcheck on phone : 
1.Car is not supported.
2.Engine is not ignited.
3.You need confirm the connection way as below.

Packing List :