Poe Adapter Cable Splitter Cable Injector Cable
China Poe Adapter Cable Splitter Cable Injector Cable, Find details about China Poe Cable, Poe Injector Cable from Poe Adapter Cable Splitter Cable Injector Cable
Basic Info.
Model NO.
Poe cable
Wire Core Material
Bare Copper Wire
Certification
CE, RoHS
Model
Poe
Brand
OEM
Color
White,Black
Trademark
topviewtek
Transport Package
Carton
Specification
15cm
Origin
China
Model NO.
Poe cable
Wire Core Material
Bare Copper Wire
Certification
CE, RoHS
Model
Poe
Brand
OEM
Color
White,Black
Trademark
topviewtek
Transport Package
Carton
Specification
15cm
Origin
China
Product Desciption
Poe Adapter Cable Splitter Cable Injector Cable
The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally from 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
Contains: INJECTOR and SPLITTER.
Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.
Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 + and 7,8 -
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet
RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter
to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect
the power connectors and the Ethernet to the powered equipment. The equipment is now
connected by them.
Input / Output Specifications
DC Input Voltage:UP to 60VDC
DC Output Voltage:UP to 60VDC
Max Output Current 1.5A-2A Max.
Over Current Protection None
Work range:below 30 meters.
General Sepcifications:
Operating Temperature -40°C ~ 60°C (-40°F ~ 140°F)
CASE OF MATERIAL PVC
Ethernet Date Rate 10/100Mbps
Ethernet Cable TIA/EIA 568 Cat.5
Humidity Up to 90%
Weight: 55g
DC Plugs 2.1mmx5.5mm
Length 170mm
The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally from 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).
Contains: INJECTOR and SPLITTER.
Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.
Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 + and 7,8 -
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet
RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter
to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect
the power connectors and the Ethernet to the powered equipment. The equipment is now
connected by them.
Input / Output Specifications
DC Input Voltage:UP to 60VDC
DC Output Voltage:UP to 60VDC
Max Output Current 1.5A-2A Max.
Over Current Protection None
Work range:below 30 meters.
General Sepcifications:
Operating Temperature -40°C ~ 60°C (-40°F ~ 140°F)
CASE OF MATERIAL PVC
Ethernet Date Rate 10/100Mbps
Ethernet Cable TIA/EIA 568 Cat.5
Humidity Up to 90%
Weight: 55g
DC Plugs 2.1mmx5.5mm
Length 170mm
Cable Kit Include:
PoE Splitter x1
PoE Injector x1
black color:
You Might Also Like
How Fiber Laser Cutting Machine Works
Shantui Mini Wheel Loader SL20wn with Best Price
Open-End Spinning Machine Made in China for Glove and Socks ......
Corten Garden Edging/Simple Garden Edging
Medical Headache High Potential Treatment Equipment
-86 Degree Lab Medical Ultra Low Super Fast Deep Freezer
Vet Treadmill (TM-260M)
Fine Polished Tapping Inner Threaded Mould Standard Parts
Rgp3 0.01mbar Oil Free Mechanical Scroll Vacuum Pump
Sexy Blue and Red Supergirl Halloween Party Dress Cosplay Co......
Women′ S Messenger Bag Canvas Souvenir Bag New Simple ......