Description:

Spray cleaning system  

 1)Include:Pump,filter device,nozzle,Pipe,protection system,reservoir,Temperature control heating system .
 
 2) Specification:
 a. Pipeline centrifugal pump: power 7.5KW, pressure : 0.5-0.6MPa, flow : 32m 3 /h;
 b. Nozzle:SUS304,1/4"; Solid columnar and  fan cone;adjustment;
 c.Pipe:SUS304,:DN65; Direction:4 sides(up ,down,facade)
 
 3) Filter system
 a. Material basket to install filters in the dip tank for sundry precipitation recycling;
 b.At the entrance to pump installation filter to protect pump
 
 4)Protection system
 a.Liquid level protection system:Stainless steel ball float liquid level gauge.Low level, pump and heating to stop work, and report to the police;
  b. Pressure protection system: electronic pressure gauge installed in the spray head of road, and set the maximum pressure, when pressure   pipeline blockage caused by ultra high automatic alarm and stop the pump work
 
  5)Temperature control heating system
  a.SUS304 Heating tube, Power :24KW;
  b.Digital display temperature control table
 
 6)Reservoir
 insulation, thickness 50 mm
 Capacity:800L( effective capacity  500-600L)
 Structure:heavy tap, with Sediment tank,And through the block type sediment box is convenient slag removal;
 
2,Rotating system
1)The gear motor power:200W, Speed ratio 1:40
2)Wheel diameter:D1200mm;
3)Structure: sprocket chain transmission
 
3,Oil mist smoke exhaust system
1)Location: equipment installed directly above
2)Purpose: recycling waste heat steam chamber and the reservoir
3)Power:1HP
 
4,Oil-water separation recycling equipment
1)Power:60W
2)Installation location: reservoir
 
2,Tank

1) Material:SUS304;
2) Thickness:2.5mm
3)Chamber size effectively:D1400×1800mm
 
6,Sealing plate and frame

1,Sealing plate:
1)Material:cold-rolled sheet:Thickness 1.5mm, insulation
2,Frame
1)Carbon steel profiles welded together
2)Main girder specifications:box iron 200×80mm
3)Surface painting antirust
 
7,Electrical control system

1)Operation mode: equipment operation mode is divided into two, manual/automatic control on the ark set switch.
A,Automatic mode: when the switch in the automatic position, all working process by PLC programmable controller
Automatic control.Have perfect protection function (maximum temperature protection, low water level protection, motor overload
P, etc.).
B,Manual mode: can be manually, the system function, including spray, loop filter, cleaning fluid heating switch
And so on.Manual mode is commonly used in the system maintenance, normal production usually adopt the automatic mode.
 
2)Electrical system requirements:

A,Main circuit, auxiliary circuit and grounding line with color difference, all clear on both ends of the wire used durable character
Indication and mark, in accordance with drawing symbols.
B,Completely closed electric control box, electric cabinet door has a power-off protection

If you have more questions, contact us directly. Tense will be provide a good plan for you.