15ms Pulse Width 3A Class PV Module IV Curve Tester Solar Simulator
China 15ms Pulse Width 3A Class PV Module IV Curve Tester Solar Simulator, Find details about China Solar Module IV Tester, Solar PV Module Tester from 15ms Pulse Width 3A Class PV Module IV Curve Tester Solar Simulator
Basic Info.
Application
Industrial
Condition
New
Certification
CE, ISO
Trademark
ZENITH SOLAR
Transport Package
Normal Container
Specification
A+A+A+, AAA, AAB
Origin
China
HS Code
90308490
Application
Industrial
Condition
New
Certification
CE, ISO
Trademark
ZENITH SOLAR
Transport Package
Normal Container
Specification
A+A+A+, AAA, AAB
Origin
China
HS Code
90308490
Product Desciption
We can customize pulse width, illumination size and so on as long as you can tell me your specific requirements.
1. Model No. and description:
SMT-AAA/AAB type Solar Cell Module Test apparatus
2 . Device main application: Tests and records Monocrystalline silicon,polycrystalline silicon solar cell module performance parameters.
3. Specifications
3.1 simulated light source
3.1.1 High-power pulsed 1000W Germany Xenon lamp
3.1.2 Spectral range in line with IEC60904-9 spectral irradiance distribution demand AM1.5; Spectral mismatch error ±25% Grade A (please refer to test report issued by National Institute of Metrology
3.1.3 Light intensity 100mW/cm2 (adjustment range 70~120mW/cm2 )
3.1.4 Pulse width 10mS
3.1.5 Light intensity non-uniformity: ±2% Grade A
3.1.6 Instability degree of irradiation: ≤±2% Grade A
3.1.7 Xenon lamp life: 300,000 times (imported from Germany)
3.1.8 Flash frequency numeration function (replace zero reset)
3.1.9 Lighting deirection is vertical upwards lighting
3.2 Test range
3.2.1 Effective test area: 2000mm×1000mm
3.2.2 Effective test range: 5W~300W
3.2.3 Voltage measurement: 0V/30V/100V(resolution 1mV)
3.2.4 Measuring current: 0m A~2A/20A(resolution 1mA)
3.2.5 Measuring temperature: 15ºC~35ºC(resolution 0.1ºC)
3.3 Test accuracy
3.3.1 Test repeatability: ±0.5%
3.3.2 Test error of Electrical performance: ≤2%
3.4 Measuring method: four-wire measurement
3.5 Test Parameters: Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp ,Rs,Rsh,
3.6 Test interval: 5 seconds/piece
3.7 Data acquisition: 14-bit high-speed synchronous acquisition card.
3.8 Test conditions calibration: Automatic correction devices (including manually enter the compensation parameters, automatic/manual temperature compensation, automatic compensation of light intensity)
3.9 Temperature measurement
3.9.1 Auto-test temperature
3.9.2 Temperature compensation and display
3.9.3 Correct temperature according to testing temperature.
3.10 Test result
3.10.1 display test time and the graphical parameters (I-V characteristic curve)
3.10.2 Test results have the ability to converted to the standard test conditions.
3.10.3 Test resuls with voice reports the number and voice prompts function.
3.11 Test report
3.11.1 Current working interface can display and record I-V characteristic curve.
3.11.2 All the module's major test parameters can be saved to the specified file of hard disk.
3.11.3 The specified file can be named by yourself.
3.12 Data summarization and printing
3.12.1 Data can be summarized according to set time period or at any time.
3.12.2 Printing in Excel format. (including the of cumulative output of I-V characteristic curve)
3.13 Professional software
3.13.1 Temperature compensation coefficient input
3.13.2 Date Name Row-column numbers input
3.13.3 Serial numbers start setting auto-increment
3.13.4 Parameters range settings of Defective products
3.14 Working time: the device can continuous work for more than 12 hours.
3.15 Power supply: Single-phase 220V / 50Hz / 2kW
3.16 Equipment size: (long) 2500mm×(width) 1400mm×(height) 920mm
3.17 Equpment Weight:350Kg
4. Complete machine configuration
4.1 Test host (including e-load): 1pc
4.2 light source: 1 set
4.3 Computer: 1pc (CPU Frequency memory 1G, hard disk drives 320G, LCD 19 inch)
4.4 14-bit synchronous high-speed A/D board: 1pc
4.5 Professional measurement software: 1 set
4.6 Printer (A4 inkjet color printers): 1PC
4.7 Standard Cell (used to adjust the light intensity and light intensity uniformity correction): 2pcs
4.8 Horizontal roller test slide rail 1 set
1. Model No. and description:
SMT-AAA/AAB type Solar Cell Module Test apparatus
2 . Device main application: Tests and records Monocrystalline silicon,polycrystalline silicon solar cell module performance parameters.
3. Specifications
3.1 simulated light source
3.1.1 High-power pulsed 1000W Germany Xenon lamp
3.1.2 Spectral range in line with IEC60904-9 spectral irradiance distribution demand AM1.5; Spectral mismatch error ±25% Grade A (please refer to test report issued by National Institute of Metrology
3.1.3 Light intensity 100mW/cm2 (adjustment range 70~120mW/cm2 )
3.1.4 Pulse width 10mS
3.1.5 Light intensity non-uniformity: ±2% Grade A
3.1.6 Instability degree of irradiation: ≤±2% Grade A
3.1.7 Xenon lamp life: 300,000 times (imported from Germany)
3.1.8 Flash frequency numeration function (replace zero reset)
3.1.9 Lighting deirection is vertical upwards lighting
3.2 Test range
3.2.1 Effective test area: 2000mm×1000mm
3.2.2 Effective test range: 5W~300W
3.2.3 Voltage measurement: 0V/30V/100V(resolution 1mV)
3.2.4 Measuring current: 0m A~2A/20A(resolution 1mA)
3.2.5 Measuring temperature: 15ºC~35ºC(resolution 0.1ºC)
3.3 Test accuracy
3.3.1 Test repeatability: ±0.5%
3.3.2 Test error of Electrical performance: ≤2%
3.4 Measuring method: four-wire measurement
3.5 Test Parameters: Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp ,Rs,Rsh,
3.6 Test interval: 5 seconds/piece
3.7 Data acquisition: 14-bit high-speed synchronous acquisition card.
3.8 Test conditions calibration: Automatic correction devices (including manually enter the compensation parameters, automatic/manual temperature compensation, automatic compensation of light intensity)
3.9 Temperature measurement
3.9.1 Auto-test temperature
3.9.2 Temperature compensation and display
3.9.3 Correct temperature according to testing temperature.
3.10 Test result
3.10.1 display test time and the graphical parameters (I-V characteristic curve)
3.10.2 Test results have the ability to converted to the standard test conditions.
3.10.3 Test resuls with voice reports the number and voice prompts function.
3.11 Test report
3.11.1 Current working interface can display and record I-V characteristic curve.
3.11.2 All the module's major test parameters can be saved to the specified file of hard disk.
3.11.3 The specified file can be named by yourself.
3.12 Data summarization and printing
3.12.1 Data can be summarized according to set time period or at any time.
3.12.2 Printing in Excel format. (including the of cumulative output of I-V characteristic curve)
3.13 Professional software
3.13.1 Temperature compensation coefficient input
3.13.2 Date Name Row-column numbers input
3.13.3 Serial numbers start setting auto-increment
3.13.4 Parameters range settings of Defective products
3.14 Working time: the device can continuous work for more than 12 hours.
3.15 Power supply: Single-phase 220V / 50Hz / 2kW
3.16 Equipment size: (long) 2500mm×(width) 1400mm×(height) 920mm
3.17 Equpment Weight:350Kg
4. Complete machine configuration
4.1 Test host (including e-load): 1pc
4.2 light source: 1 set
4.3 Computer: 1pc (CPU Frequency memory 1G, hard disk drives 320G, LCD 19 inch)
4.4 14-bit synchronous high-speed A/D board: 1pc
4.5 Professional measurement software: 1 set
4.6 Printer (A4 inkjet color printers): 1PC
4.7 Standard Cell (used to adjust the light intensity and light intensity uniformity correction): 2pcs
4.8 Horizontal roller test slide rail 1 set
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine