Automatic Foundry Sand Casting Molding Machine

China Automatic Foundry Sand Casting Molding Machine, Find details about China Casting Machine, Cast Molding Machine from Automatic Foundry Sand Casting Molding Machine

Surface Treatment
Spray-Paint
Surface Roughness
Ra1.6
Standard
ASTM
Certification
ISO 9001:2000
Trademark
Berry cast
Transport Package
Wood Plate
Origin
Qingdao, China
HS Code
8454309000
Surface Treatment
Spray-Paint
Surface Roughness
Ra1.6
Standard
ASTM
Certification
ISO 9001:2000
Trademark
Berry cast
Transport Package
Wood Plate
Origin
Qingdao, China
HS Code
8454309000
 Machine composition
Automatic Foundry Sand Casting Molding Machine
Automatic Foundry Sand Casting Molding Machine


The machine is composed of thirteen parts: base, shutter, column components, upper box components, lower box components, sand shooting system, pressing head body, sand gate, hood components, pneumatic system, hydraulic system, electrical system,spare parts, etc.
lBase:is made from welding parts.It is the main support of the other functional parts of the machine. The machine is adjusted to the horizontal position by adjusting the screw.
lShutter:is mainly composed of middle box, guide frame, an upper guide rail, a ferrule assembly, sand box assembly, pusher, pusher down guide components Department sets of components, to achieve the box with the template of the import table and will make good sand to the device on the launch of the action process.
lcolumn components:is mainly composed by he upper slide frame, the lower slide frame, the column, the main cylinder, the lifting cylinder and so on. The upper and lower frames are connected with the upper and lower boxes respectively, and up and down along the four vertical columns, realizing the closing and compaction of the upper and lower boxes. Hard chromium plating on the surface of the column to increase the wear resistance.
lupper box components:is mainly composed of the upper box, the sand inlet pressure plate and the guide sleeve. Glue on the inner and lower surface of the upper box.
lLower box components:is mainly composed of the upper box, the sand inlet pressure plate and the guide sleeve. Glue on the inner and lower surface of the lower box.
lsand shooting system:is mainly composed by shooting box, shooting mouse, maintenance plate.
lpressing head body:is mainly composed of cross beam, pressure head, gate plug, pressure plate and so on.
lsand gate:It is mainly composed of cylinder, gate body and seal ring
lhood components:is composed of the whole machine shield, the limit switch bracket and so on
lpneumatic system: is mainly composed of template shuttle cylinder, sand type cylinder, gas road and so on. The control elements can control the movement or operation of the original parts such as the sand shooting system, the exhaust valve.
lhydraulic system:is composed of hydraulic station, air conditioning cooler, compacted cylinder, electromagnetic valve, pipeline and so on. The lifting and compaction of the upper and lower compacting stations can be realized through the control elements.
lelectrical system:adopts PLC control.The program has perfect self lock protection function and fault detection and display function.
lspare parts: refer to the spare part list.
Automatic Flaskless Parting Molding Machine for Green Sand Casting
Model/SpecificationZ426Z427Z428Z4210
Sand mold size(mm)610*508*130-180700*600*130-180800*700*200-2501000*800*200-280
660*508*130-180660*600*130-180800*800*200-2501000*1000*200-280
Productivity(s/mold)40-4540-4550-5555-60
Compaction pressure(Mpa)0.7-0.90.7-0.90.7-0.90.7-0.9
Air consumption(m³/Min)11.21.62
Wokring oil pressure(Mpa)10.69.28.98.5
Power(Kw)1518.52230
Sand consumption(T/h)10.5-17ton/hour12-22ton/hour23-30ton/hour30-40ton/hour
 
Automatic Foundry Sand Casting Molding Machine
Automatic Foundry Sand Casting Molding Machine

Users' instructions
a)Machine lifting instruction
Please use the lifting device with 10ton capacity or above .
b)Gating system and gate stick selection
There are nos 9 pouring gate. If he offset template is used, the height of the gate rod support seat or the gate length needs to be changed
c)Sand mixture
  1.original sand
  1) original sand
Generally adopt No6 silica sand, for a requirement of good casting surface, sometimes use the No7 silica sand.
  2)additives 
Bentonite: when selecting additives, in addition to the characteristics of the machine, the ability of the object products (pouring weight and shape, etc.) and the disassembly of the sand box should be considered.
Coal power:normally adopt 8% dust coal.
  2 .sand mixture specification
1)water:3~4% 
2)CB data:33~39% (during the sand supplying, should adjust the CB data reasonably)
3)Compression strength:10~14N/cm2(1.0~1.4Kg/cm2)
4)Betonite total amount:10~12% (in order to ensure the Water, prevent the CB changing.
Reference specification:
5)breathability: above 120
6)Lg-Loss:3~4% 
7)Active clay composition:6~8% 
8)surface stability:above 85%
3.additives adding reference value
Bentonite  0.3~0.6%
Coal powder   0.05~0.15%
4.Original material reference value
   1)silica sand
Sio2 purity:above 95%
Mesh:equal to AFS62
Mesh distribution:200mesh,280mesh,PAN total: under 0.1%
   2)Bentonite
montmorillonite content: NA element base 90%
water:8~10%
granular:200mesh,Through:75~85%
PH:8.5~10.5
   3)coal powder
Ash: under 8%
Volatiles:42±3%
Fixed carbon:48±3%  
granular:200mesh,through:above 50%, 35mesh,through 5%         
a)Sand mixture composition
Original sand:100
Bentonite:7.5
Coal power:2
Powder:0.5


About Delivery and Shipment
Considerate and good packing: equipment painting is completed before shipment. The machine body is covered with stretch film to avoid rub off the surface paint. The machine is generally packed by wood case as per customer's requirement. As for the important key parts such as electric cabinet is packed with shockproof packaging material and then packed in wooden cases.
We has long-term with ACL, CSCL, CCNI,CNC, COSCO etc insure the goods to the port on time
Automatic Foundry Sand Casting Molding Machine
Automatic Foundry Sand Casting Molding Machine

FAQ
1.Delivery lead time
--As for standard machine, we have some in stock,it can be delivered asap receiving deposit.
2.Our production quality control?
--We have ISO9001, and follow the PDCA rules, 6S on-site management. Every machine will be fully assembled and carefully tested before shipment.

 3.What's your machine quality guarantee?
--The machine adopts world famous brand components to keep in perfect working condition.Quality guarantee time is 12 months, during this time,we provide free spare parts if it is broken as non-human factor.

 4.Are you able to give installation and commissioning overseas?How long will it takes?
--Yes,we supply overseas service. And the engineers' board and lodging expense shall be borne by customers.
--It usually takes about 20 days finish the commission and trial running.
--For standard item, we can provide assemble and install video for guidance.

 5.How can I trust you to delivery the right machine as I ordered?
--Our company's culture is honesty and quality. We have been in exporting for 9 years. We won customer's trust depending on our good products and service. We are certified by SGS, and Made-in-China. We will take video and pictures to you when the machine is finished and during the loading to let you make sure the right machine as you ordered.