Products

Powerline Ethernet Extender for DIN Rail Industrial

China Powerline Ethernet Extender for DIN Rail Industrial, Find details about China powerline adapter, powerline enthernet bridge from Powerline Ethernet Extender for DIN Rail Industrial

Model NO.
WD-1201M-DIN(T)
Trademark
Wondertek
Specification
120*89*44mm(LxWxH)
Origin
China
HS Code
8517699000
Model NO.
WD-1201M-DIN(T)
Trademark
Wondertek
Specification
120*89*44mm(LxWxH)
Origin
China
HS Code
8517699000
Powerline Ethernet Extender for DIN Rail Industrial
 

Product Specifications

Brief introduction

DIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the HomePlug protocol and the actual bandwidth up to 500Mbps. The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..
  1. Technical parameters             
  2. Support HomePlug.
  3. Industrial DIN rail style installation
  4. Actual bandwidth up to 500Mbps
  5. The maximum transfer distance up to 1000 meters
  6. Self-adapt the rate
  7. Compatible with all HomePlug devices
  8. One Domain Master can manage 128pcs End Point.
  9. There can be 4 groups(4different Domain Master) of PLC telecommunication devices in the same power line circuit
1.1.2 Manageability
  1. Support Remote Firmware update(TR069)
  2. 802.3D Ethernet Bridge.
  3. 802.1Q VLAN.
  4. Quality of Service(QoS) .
  5. IGMO(IPv4)Snooping&MLD(IPv6)Snooping
  6. Support local web management
1.1.3 Operating environment
 
  1. Working temperature:  -40ºC-80ºC.
  2. Operating humidity: 10%-85% no condense
  3.  Storage humidity:5%-90% no condense
1.1.4 Design standards
  1. HomePlug 
  2. IEC 60529
  3. IEC 50022
  4. IEC 60068-2-6
  5. MIL-STD-810G
 
ModelWD-1201M-DIN  
Interface1*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface MDI/MDX support 
LED display lightEthernet, PLC link ,power 
Transfer band2-68MHz
Protocol(PHY)IEEE802.3,IEEE802.3x, IEEE802.3u   HomePlug
Security128-AES
Transfer rate(PHY)1200Mbps
ModulationOFDM
Effective transfer rateTCP/IP  500Mbps    
ManageabilityRemote Firmware update,support TR-069(optional)
802.1D Ethernet Bridge
802.1Q VLAN
Quality of Service(QoS)
IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Working voltageAC 90V-520V   
Operating temperature-40ºC-80ºC
Size67*160*123 (mm)(L×W×H)
Weight0.35kg 
Operating environmentOperating humidity:10%-85% (no condense)
Storage humidity: 5%-90%(no condense)
CertificationFCC,CE class B,WEEE,RoHS

1.2 Features
Packet loss:≤0.1%(100M,load 70%) 
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration,  maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.


Powerline Ethernet Extender for DIN Rail Industrial

Powerline Ethernet Extender for DIN Rail Industrial

Powerline Ethernet Extender for DIN Rail Industrial

You Might Also Like