Products

Camera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting Plotter

China Camera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting Plotter, Find details about China Plotter, Cutting Machine from Camera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting Plotter

Model NO.
H880 CCDmodel
Computerized
Computerized
Cache Capacity
4MB
Cutter Pressure
0-500g
Cutting Speed
0-800mm/S
Cutting Length
Unlimited
Product Name
Plotter Cutter
Voltage
110V/240V
Paper Feed Width
800mm
Cutting Width
700mm
Trademark
yuntu
Transport Package
Carton
Specification
long100CM*wide22CM*high14CM weight: 18.05KG
Origin
Jinan City, Shandong Province, China
HS Code
3701100000
Model NO.
H880 CCDmodel
Computerized
Computerized
Cache Capacity
4MB
Cutter Pressure
0-500g
Cutting Speed
0-800mm/S
Cutting Length
Unlimited
Product Name
Plotter Cutter
Voltage
110V/240V
Paper Feed Width
800mm
Cutting Width
700mm
Trademark
yuntu
Transport Package
Carton
Specification
long100CM*wide22CM*high14CM weight: 18.05KG
Origin
Jinan City, Shandong Province, China
HS Code
3701100000
Camera computer full automatic edge inspection lettering machine
engraving machine H880 type Die cutting plotter
Camera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterProducts Description
Product model
H500
H880
    H1380
Maximum paper width
400mm 
800mm
   1300mm
Maximum drawing width
300mm
700mm
   1200mm
Support and paper supply
Desktop
Vertical bracket
Bracket height
Without stand
700mm
Compatible system
   XP system,WINDOWS 7   32 bit ,64 bit
control panel
   Overhead, 6X2 character LCD display, touch navigation keyboard
motor driven
   Main shaft double high torque motor, 16 subdivision drive
Targeting
   Electronic limit, arbitrary origin setting
Cutting speed
   0--- 800 mm/s
Cutting length
   Unlimited
Knife pressure
   0---500G(Adjust at will)
Mechanical accuracy
   0.05mm
Repeat accuracy
   <+-0.1MM
Types of drawing pens
   Various types of water-based, oily, atomic pens, poster pens with a diameter of 11.5MM
Drawing instruction
   HP--GL--PL/DM--PL
Interface
   Standard RS232(string)/ USB
Power supply
   AC11V /240V±10%,52HZ
rated power
   120W
Operating environment
   temperature :+5-+35,Relative temperature 30%-70%
Dimensions
68*22*14CM
   100*22*14CM   156*22*14CM
Package dimensions
75*32*36CM
   111*32*35CM   165*32*35CM
Shipping weight
9.95KG
    18.05KG   25.25KG
 
Camera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterCamera Computer Full Automatic Edge Inspection Lettering Machine Engraving Machine H880 Type Die Cutting PlotterQ:Why is the pattern deformed or incomplete? 1. More pressure or too long blade tip or too dirty platen or too soft stickiness,
all of these factors can cause more resistance to the two faces of paper and make it fall behind the roller rotating, thus result in
deformed pattern. 2. The software setting isn't proper. (The tool compensation value is too big) 3. The carriage belt is too loose,
or the metal roller can't exactly follow the motor running. 4. The motor doesn't run all the steps. 5. The pattern is normal but not
complete, this may be resulted from too small tool compensation value.
Q:Why does the machine plot abnormally? 1. Software setting is not matched to the machine, so you must adopt proper
commands set or set proper tool compensation value. 2. The plotting software is suddenly broken up. 3. Plotting software has
been damaged or there is virus in computer.
Q:Why does the paper run deviation? 1. The stickiness isn't placed right. 2. The platen is too dirty so that the resistance from
two sides can't be balanced when the paper is moving. 3. The pinch rollers have been deformed or don't match to each other.
4. The pressure of the pinch roller is a little smaller and the paper is very sensitive to the external force. 5. The balance of the
stickiness weight isn't very good.
Q:Why some parts of letters are missing? 1. The vinyl is too heavy or too tightly wrapped. Metal roller might be soiled by
some foreign substance or by vinyl chips. 2. Cutting speed is too fast, cutting force is too great, or cutter tip is too long. 3.
Synchromesh belt is too tight, or pinch roller is under too much pressure. 4. Metal roller is faulty. Contact local distributor for
repairs and replacement. Q:Why different letters on the same line are cut to different depths? 1. Cutter holder is not tightly
attached. It should be tightened. 2. Cutter blade is not tightly set in the holder.
Q:Why letters appear to have ripples? 1. Cutting speed is too fast. Except for cutting large letters, speed should not exceed
80mm/s. 2. Cutting blade is of poor quality, or it has been damaged. Replace it. 3. Cutter holder is not tightly installed. Tighten
screw. Cutting small letters When cutting small letters, cutting speed and force should be adjusted to the lowest setting. Similarly
cutter tip should be adjusted to as short as possible. Cutting large letters Cutting speed and force may be increased to higher
settings. When cutting large letters Sharp Angle in Artcut software may be ignored.

You Might Also Like