Strong Adhesion Epoxy Resin Adhesive for Crystal Jewelry
China Strong Adhesion Epoxy Resin Adhesive for Crystal Jewelry, Find details about China Epoxy Adhesive, Adheisve from Strong Adhesion Epoxy Resin Adhesive for Crystal Jewelry
Basic Info.
Model NO.
630AB
Characteristic
Strong Adhesive, Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Shelf Life
Six Months
The Mixing Ratio
1:1
Trademark
Jinhua glue
Transport Package
20kg/Set, Carton
Specification
SGS, ROHS, MSDS, STC
Origin
Shenzhen, Guangdong, China
HS Code
3506912000
Model NO.
630AB
Characteristic
Strong Adhesive, Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
Shelf Life
Six Months
The Mixing Ratio
1:1
Trademark
Jinhua glue
Transport Package
20kg/Set, Carton
Specification
SGS, ROHS, MSDS, STC
Origin
Shenzhen, Guangdong, China
HS Code
3506912000
Product Desciption
Adhesive No.: 630A/B
Adhesive Specification: 10kg/set
[Main Component of epoxy adhesive]
A component is resin, B component is curing agent.
The main agent 630A Curing agent 630B
Color: Colorless transparent Colorless transparent
Specific gravity: 1.15 1.05
Viscosity25°C: 8000-12000CPS 5500-8500CPS
[Feature]
Epoxy resin 630AB is based on the room temperature, having the features of:
(1) easy operation, fast curing
(2) super bond strength, waterproof, sealing
(3) it can be cured by heating
[Scope Of Application]
The products of this series are widely used for metal bonding adhesive, electronic products adhesive, hard material adhesive and the insulation of other electronic components, moistureproof, potting, confidential encapsulation,etc..
[Conditions of usage]
1)Mixing ratio: A: B = 100:100(weight ratio)-->1:1
2)Hardening conditions: 25°C× 1H or 55°C×5min(2 g)
3)Usable time: 25°C×10min (100g)
[Using Method]
1.Working environment: The container of holding glue please keep clean, A and B part should be in accordance with the weight ratio, weigh accurately , mix fully along the container wall by clockwise and use after 3 to 5 minutes .
2.According to the operational time and dosage of mixing rubber, avoid wasting. When the temperature below 15°C, please put A glue to glue again after warm up to 30°C, easy to operate, (a glue will be thicken when low temperature ); Must be sealed lid after use, avoid product rejection caused by moisture absorption.
3.When the relative humidity is more than 85%, the curing surface easy to absorb moisture in the air, form a layer of white mist, so when the relative humidity is more than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
[Warning]
1. The operating environment should be ventilative and should keep away of the fire. Closely sealed after use.
2. Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.
3. If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality
4. Take strict precautions against touching by the kids and entering into the mouth.
5. Please make a trial to avoid usage mistakes before application.
[Storage And Packing]
Stock the products in the air-tight seal at the temperature of 25°C. The shelf life is half a year. It is available to use based on passing of the test if being beyond the shelf life.
Free sample is available.
Adhesive Specification: 10kg/set
[Main Component of epoxy adhesive]
A component is resin, B component is curing agent.
The main agent 630A Curing agent 630B
Color: Colorless transparent Colorless transparent
Specific gravity: 1.15 1.05
Viscosity25°C: 8000-12000CPS 5500-8500CPS
[Feature]
Epoxy resin 630AB is based on the room temperature, having the features of:
(1) easy operation, fast curing
(2) super bond strength, waterproof, sealing
(3) it can be cured by heating
[Scope Of Application]
The products of this series are widely used for metal bonding adhesive, electronic products adhesive, hard material adhesive and the insulation of other electronic components, moistureproof, potting, confidential encapsulation,etc..
[Conditions of usage]
1)Mixing ratio: A: B = 100:100(weight ratio)-->1:1
2)Hardening conditions: 25°C× 1H or 55°C×5min(2 g)
3)Usable time: 25°C×10min (100g)
[Using Method]
1.Working environment: The container of holding glue please keep clean, A and B part should be in accordance with the weight ratio, weigh accurately , mix fully along the container wall by clockwise and use after 3 to 5 minutes .
2.According to the operational time and dosage of mixing rubber, avoid wasting. When the temperature below 15°C, please put A glue to glue again after warm up to 30°C, easy to operate, (a glue will be thicken when low temperature ); Must be sealed lid after use, avoid product rejection caused by moisture absorption.
3.When the relative humidity is more than 85%, the curing surface easy to absorb moisture in the air, form a layer of white mist, so when the relative humidity is more than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
[Warning]
1. The operating environment should be ventilative and should keep away of the fire. Closely sealed after use.
2. Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.
3. If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality
4. Take strict precautions against touching by the kids and entering into the mouth.
5. Please make a trial to avoid usage mistakes before application.
[Storage And Packing]
Stock the products in the air-tight seal at the temperature of 25°C. The shelf life is half a year. It is available to use based on passing of the test if being beyond the shelf life.
Free sample is available.
| The properties after hardening | ||
| 1) Hardness | shore D | <85 |
| 2) Withstand voltage | KV/mm | 22 |
| 3 ) Flexural strength | Kg/mm2 | 25 |
| 4) Volume resistivity | Ohm3 | 1x1015 |
| 5) Surface resistance | Ohmm2 | 5X1015 |
| 6)Thermal conductivity | W/M.K | 0.56 |
| 7)Induced electric loss | 1KHZ | 0.42 |
| 8)Heat Deflection temperature | °C | 140 |
| 9)Moisture absorption | % | <0.15 |
| 10)Compressive strength | Kg/mm2 | 11.4 |
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......