Industrial Waste Water Treatment Sewage Sludge Dewatering Belt Filter Press Machine

China Industrial Waste Water Treatment Sewage Sludge Dewatering Belt Filter Press Machine, Find details about China Filter Press, Belt Filter Press from Industrial Waste Water Treatment Sewage Sludge Dewatering Belt Filter Press Machine

Basic Info.

Model NO.

Filter Cake Production (Ton/H)

2-85

Sediment Percentage (%)

75-85

Total Power (Kw)

10-33

Deliver Time

30 Days

Warranty

12 Months

After-Sales Service

The Whole Time

Trademark

Transport Package

Nude Cargo or Negotiation

Origin

Shanghai

HS Code

8421291090

Model NO.

Filter Cake Production (Ton/H)

2-85

Sediment Percentage (%)

75-85

Total Power (Kw)

10-33

Deliver Time

30 Days

Warranty

12 Months

After-Sales Service

The Whole Time

Trademark

Transport Package

Nude Cargo or Negotiation

Origin

Shanghai

HS Code

8421291090

Product Desciption

Profile

The structure of the belt type filter press is mainly composed of transmission device, liquid mix agitator, feeding distributor, gravity dehydration device, prepress-dewatering porous roller, high-pressure dewatering roller, alignment extrusion roller, tensioning device, frame, deviation correcting device, pneumatic device, filter net, cleaning device, discharging device, bearing and pedestal, filtrate collecting device, protective device, and centralized electric control cabinet.

Product Advantages

1. The frame is reinforced, the appearance is elegant, the bearing seat is firm. The equipment is treated with waterproof and the special anti-corrosion process.

2. The gravity dewatering area is equipped with an advanced distributor to make the material distribution uniform and prolong the life of the filter belt.

3. The high degree of automation of continuous operation from feed to discharge mud cake

4. Different materials are equipped with different structures of filter belts, with high filtration accuracy.

Industrial Waste Water Treatment Sewage Sludge Dewatering Belt Filter Press Machine

Details
1. Transmission device
The transmission device consists of the transmission shaft, sealed bearing with seat, and cycloidal needle wheel type reducer. The outer surface of the transmission shaft is coated with high-quality natural rubber, to increase the friction coefficient of the transmission. The rotation rate of the motor is controlled by a frequency converter to ensure the filter belts run stably and the speed is adjustable.

2. Liquid mix agitator
This machine uses a nonblocking static mixer to mix sludge and chemical liquid (Material that is not easy to be flocculated will be treated by stirring dynamic mixer). The machine is installed in front of the sludge distributing flume, and the flocculants come from surrounding into the sludge tube by high-pressure injection and then arrive to the mixed reactor. The sludge particles can collide with diluted polyelectrolyte solution quickly, and the best flocculation effect and dewatering effect can be achieved by adjusting the flow rate of sludge and chemical liquid.

3. Feeding distributor
After passing through the flocculating mixer, the sludge enters the feed distributor. The materials are distributed evenly on the gravity condensed section by flow guiding, overflow plate, leveling plate, and the side baffle. In order to improve the gravity dewatering effect of sludge, a number of water diversion rake teeth are set above the gravity dewatering area, and the free water from the upper part of the accumulated sludge is introduced into the filter net and seep out.

4. Tensioning device
The function of the tensioning device is to tensioning the upper and lower filter bands, drive all the sticks to run through the main live roller, and dehydrate the filter cake with a certain extrusion pressure and shear force. This machine uses a bounce cylinder for tensioning. The tension force is controlled by regulating the air pressure.

5. Frame
This frame is made of high-quality national standard square pipe, forming through integral solid welding. The surface is treated with Sa2.5 grade sandblasting and rust cleaning. After further process refers to heavy anti-corrosion treatment of fluorocarbon paint or hot spray zinc treatment, its corrosion resistance can reach more than 10 years.

6. Gravity dehydration device
The main function of the gravity dewatering device is to remove free water and interstitial water from the material, reduce the fluidity of the material and prepare for the next step pressure filtration. Its structure contains independent filter net gravity dehydration (that is, concentrator), and then the gravity dehydration of upper and lower pressure filter nets, through a 6-11 meter long gravity dehydration, a large number of free water in sludge is fully removed by filtration. At this time, the sludge can withstand larger extrusion pressure.

7. Prepress-dewatering porous roller
Prepress-dewatering porous roller is that many holes uniformly distributed on the surface of the roller. It is the maximum dehydration roller that the filtered water can be expelled both inside and outside. After the sludge was extruded, the filter cake was initially formed.

8. High pressure dewatering roller
The high-pressure dewatering roller is made up of several rollers of different diameters. The surface of the roller is coated with high-quality natural rubber or PE. Two filter belts are winding between the rollers in a vertical S shape. The diameter of the roller is gradually reduced to form a certain pressure increase, so that the pressure on material increases gradually, a dry filter cake is initially formed through the effect of the extrusion pressure and shear force.

9. Alignment extrusion roller
The filter cake after high-pressure dewatering is still not ideal. In order to achieve maximum solid-liquid separation, it is necessary to extrude through high-strength pinch rolls. Each group of pinch rolls is divided into a fixed roll and a moving roll with airbag pressure. The outer surface of the moving roll is coated with high-quality natural rubber with lower hardness in order to soft contact with the sludge extrusion; adjust the appropriate pressure to ensure the sludge passing and full dehydration.

10. Deviation correcting device
The automatic deviation correcting device is mainly made up of a gas cylinder, solenoid valve, and proximity switch. The device can realize automatic tracking correction. The characteristics are sensitive, reliable, and long service life. The running position of the filter belts keeps stable and centering. The general deviation error is not more than 15mm.

11. Pneumatic device
The pneumatic device controls the tension and deviation of the filter belt and the pressure adjustment and operation of the clamping roller. The pneumatic control component is sensitive, reliable, and durable.

12. Filter net
The pressure filter net is woven from the polyester wire. It is divided into interfaces with port and nonport interfaces. Choose a different filter net according to the characteristics of the sludge. High-quality filter nets are adopted with the features of high strength, good permeability, difficulty to block, smooth surface, high solid recovery rate, easy to clean, and easy to disassemble and assemble.

13. Cleaning device
The cleaning device consists of a water jet connecting pipe and nozzle, spray brush, valve, waterproof cover, and filter. Apply stainless steel 304 to produce the nozzle and each nozzle can be cleaned and replaced separately. The residual sludge attached to the filter belt can be removed effectively and continually through the belts rotary and fan-shaped water spray.

14.Discharging device
The function of the filter scraper is to scrape out the filter cake, the scraper pressure can be adjusted, and the wear of the filter net is small.

15.Bearing and pedestal
In order to prevent corrosion, all bearings and pedestals adopt a double V-ring seal, Apply nodular cast iron to produce the pedestals. The machine adopts double row centering roller bearing to realize large load-bearing capacity and long service life.

16. Filtrate collecting device
In order to prevent leakage and splashing of flushing water and filtrate, all flushing water and filtrate are collected through the drip tray, and they can be discharged intensively or separately.

17. Protective device
The safety protection net and warning sign are set on both sides of the machine. The fault emergency response system composed of the electric control limit wire switch; it can monitor all actions in the adjustment process of the filter belt. The limit switch triggers and shuts down when the adjustment system produces excessive deviation in the centering process.

18. Centralized electric control cabinet
The whole sludge dewatering system is controlled by a set of distribution control cabinets (manual contact control or PLC controller). The electronic control cabinet provides power supply, start-up, stop protection, and alarm (save from short circuit, overheating, overload, and phase deficiency control) for the main engine and its supporting equipment - sludge pump, cleaning pump, mixer, liquid pump, air compressor, and conveyor, etc.

Model technical parameters

Model	Belt width (mm)	Mud Processing capacity (Ton/H)	Filter cake production (Ton/H)	Sediment percentage (%)	Total Power of equipment (KW)	Total power (KW)	Dimensions LWH(MM)	Weight (KG)
Zr-1000P8L	1000	10-16	2-3	75-85	3	10	550020002100	4500
Zr-1500P8L	1500	15-25	4-5	75-85	4	13	580024002200	6500
Zr-2000P8L	2000	25-35	6-7	75-85	5.5	17	750029002300	7600
Zr-2500P8L	2500	30-40	10	75-85	5.5	17	780032002500	9200
Zr-3000P8L	3000	40-50	12-15	75-85	11	33	1250035002500	14500
Zr-3500P8L	3500	50-60	15-17	75-85	11	33	13000140002500	15500