Products

Various Size Rotary Encoder, Incremental Encoder, Absolute  Rotary  Encoder, Hollow Encoder, Logical Encoder, Stereo  Encoder with Good Quality

China Various Size Rotary Encoder, Incremental Encoder, Absolute  Rotary  Encoder, Hollow Encoder, Logical Encoder, Stereo  Encoder with Good Quality, Find details about China Encoder, Rotary Encoder from Various Size Rotary Encoder, Incremental Encoder, Absolute  Rotary  Encoder, Hollow Encoder, Logical Encoder, Stereo  Encoder with Good Quality

Model NO.
BS-ENCODER
Package
DIP
Installation Form
Axle Sleeve Type
Brand
BS
Axonia
Servo Installation Type
Certificate
ISO9001, ISO14001, Ts16949
RoHS
All Products Are RoHS Compliant
Application
Audio Equipment, Mixer, Amplifier, Radio
Produce Capacity
200kpcs Per Day
Trademark
BS
Transport Package
Plastic Bags, Carton
Specification
verious size
Origin
China
HS Code
8533400000
Model NO.
BS-ENCODER
Package
DIP
Installation Form
Axle Sleeve Type
Brand
BS
Axonia
Servo Installation Type
Certificate
ISO9001, ISO14001, Ts16949
RoHS
All Products Are RoHS Compliant
Application
Audio Equipment, Mixer, Amplifier, Radio
Produce Capacity
200kpcs Per Day
Trademark
BS
Transport Package
Plastic Bags, Carton
Specification
verious size
Origin
China
HS Code
8533400000

Bosin electronics is a manufacturer specializing in rotary encoders, potentiometers and switches. Our company passed ISO9001, ISO14001, ISO/TS16949.

The type potentiometer with cooper shaft, mainly used on audio equipment, interphone and radio

Following please check the specification.
1.Mechanical characteristics for 8mm rotary potentiometer
1.1 Total Rotational Angle:300°±10°
1.2 Rotational Torque:20~100 gf.cm 
1.3 Stopper Strength:3.0Kgf.cm Min 
1.4 Push-Pull Strength:Pull: 8Kgf Max; Push: 6Kgf Max
1.5 Shaft wobble:0.5 mm Max
1.6 Detent: 1(Center) detent, 11 detents
2.Electrical characteristics
2.1 Total Resistance:1KΩ~1MΩ
2.2 Resistance Tolerance:±20%
2.3 Resistance Taper:A,B,C
2.4 Max. operating Voltage:AC 50V, DC 10V
2.5 Rated Power:0.05W
2.6 Sliding Noise:100 MV Max
2.7 Insulation Resistance:Less Than 100MΩ at DC 250V
2.8 Withstand Voltage:1 minute at AC 300V
2.9 Residual Resistance:50Ω Max
3.0 Gang error:40db~0db±3db
3.Durability
3.1 Rotational Life:30,000 Cycles Min.
3.2 Cold Test:-20±2°C for 96 hours
3.3 Dry Heat:70±2°C for 96 hours
3.4 Temperature Cycle:-20~+70°C, 5 cycles
3.5 Soldering Condition:Wave Soldering: 260°C±5°C,5 Sec. Max
 Manual Soldering: 350°C±10°C 3 Sec Max.
4. Switch Characteristics
4.1 Rated Power:3.0 A at DC 16V
4.2 Contact Resistance:Less than 50mΩ
4.3 Switch Angle:30°±10°
4.4 Switch Torque:150~450gf.cm 
4.5 Switch Life:25,000 cycles without load

Various Size Rotary Encoder, Incremental Encoder, Absolute  Rotary  Encoder, Hollow Encoder, Logical Encoder, Stereo  Encoder with Good Quality
Various Size Rotary Encoder, Incremental Encoder, Absolute  Rotary  Encoder, Hollow Encoder, Logical Encoder, Stereo  Encoder with Good Quality
Various Size Rotary Encoder, Incremental Encoder, Absolute  Rotary  Encoder, Hollow Encoder, Logical Encoder, Stereo  Encoder with Good Quality







 
 
  
 

You Might Also Like