China MP330 Wireless Charging Solar Smart Portable Mobile Charger Power Solar Mobile Power Supply with Light AC and Type-C Output for Outdoor Emergency, Find details about China Lithium Battery, Battery Pack from MP330 Wireless Charging Solar Smart Portable Mobile Charger Power Solar Mobile Power Supply with Light AC and Type-C Output for Outdoor Emergency
Parameters of portable energy storage power supply | |||||
Dcin input port parameters | Project | Minimum | Standard | Max | Remarks |
Standard input voltage range | 12Vdc | 15Vdc | 26Vdc | The product is equipped with 15V / 4A adapter as standard; | |
Input charging current | - | 3A | 5A | ≤60W | |
Input polarity reverse connection protection | --- | Support | --- | When the input is connected reversely, it cannot be charged, and there is no display on the display screen | |
Input short circuit protection | --- | Support | --- | When the input is short circuited, it cannot be charged, and there is no display on the display | |
Dc5521 cigarette lighter output port parameters | Output voltage range | 9Vdc | --- | 12.6Vdc | When the rated input of battery module is 9 ~ 12.6vdc and 0-100% load |
Rated output current | --- | 10A | --- | The rated input of the battery module is 9 ~ 12.6vdc, and the output voltage range is adjustable | |
Current limiting protection | 10.1A | 12A | 14A | If the output current exceeds this current limit point, the output will be closed and the overcurrent will be relieved | |
Remarks: 1. Dc5521 cigarette lighter outputs at the same port. Dc5521 cannot be loaded for a long time > 4a; the interface does not support high-power continuous discharge; 2. Overcurrent, overload, short circuit, etc. are destructive tests and cannot be continuous. The test time shall be less than 3S for a long time; | |||||
Qc3.0 output port parameters | 5V no-load output voltage | 4.7V | 5.0V | 5.6V | |
5V full load output voltage | 4.5V | 5.0V | 5.5V | ||
5V rated output current | --- | 2.5A | --- | Overcurrent 3.1-4.5a | |
9V no-load output voltage | 8.7V | 9.0V | 9.6V | ||
9V full load output voltage | 8.5V | 9.0V | 9.5V | ||
9V rated output current | --- | 2.0A | --- | ||
12V no-load output voltage | Battery voltage | Battery voltage 9-12.6v | |||
12V full load output voltage | Battery voltage -0.5v | --- | Battery voltage | ||
12V rated output current | --- | 1.5A | --- | ||
Automatic identification" | --- | Yes | --- | Output corresponding voltage and current according to different loads | |
Remarks: overcurrent, overload, short circuit, etc. are destructive tests, which can only be tested at 5V, not continuous. The test time shall be less than 3S for a long time; | |||||
Type-C output port parameters (PD60w protocol) | Project | Minimum | Standard | Max | Remarks |
5V no-load output voltage | 4.5V | 5.0V | 5.7V | ||
5V full load output voltage | 4V | 5.0V | 5.5V | ||
5V rated output current | 3A | Overcurrent 3.1-4.5a | |||
9V no-load output voltage | 8.5V | 9V | 9.7V | ||
9V full load output voltage | 8V | 9V | 9.5V | ||
9V rated output current | --- | 3A | --- | ||
12V no-load output voltage | 11.5V | 12V | 12.7 | ||
12V full load output voltage | 11V | 12V | 12.5V | ||
12V rated output current | --- | 3A | --- | ||
15V no-load output voltage | 14.5V | 15V | 15.7 | ||
15V full load output voltage | 14V | 15V | 15.5V | ||
15V rated output current | --- | 3A | --- | ||
20V no-load output voltage | 19.5V | 20V | 21 | ||
20V full load output voltage | 18V | 20V | 20.5V | ||
20V rated output current | --- | 3A | --- | ||
--- | Yes | --- | Output corresponding voltage and current according to different loads | ||
Remarks: overcurrent, overload, short circuit, etc. are destructive tests, which can only be tested at 5V, not continuous. The test time shall be less than 3S for a long time; | |||||
AC output port parameters | No load output voltage | 105Vac | 110Vac | 115Vac | American rules / Japanese rules |
On load output voltage | 99V | 110V | 121V | American rules / Japanese rule | |
Output waveform | --- | Sine wave | --- | Rated R load | |
Output frequency | 59Hz | ZH09 | 61Hz | American rules / Japanese rule | |
Rated output power | --- | 330W | --- | Battery module rated input 10.5 ~ 12.6vdc rated pf1.0r load | |
Output power factor | 0.8 | 1 | --- | Rated input of battery module: 9.6 ~ 12.6vdc, rated r loa | |
Efficiency | 85% | --- | --- | Average efficiency of on load current at four points of 40%, 60%, 80% and 100% (for reference only) | |
Short circuit protection | --- | Yes | --- | If the output terminal, wire or external equipment is short circuited, turn off the inverter output. The product shall not be damaged during the short circuit, and the output shall be restored manually | |
Overload protection" | 340W | 360W | 380W | When the load power of DC + USB + AC is greater than 360W, trigger overload protection, turn off AC, keep DC and USB output (rated input of battery module is 10.5 ~ 12.6vdc, rated r load) | |
Inverter over temperature protection | 85ºC | --- | --- | After protection, the inverter output is stopped and needs to be restored manually | |
Remarks: overcurrent, overload, short circuit, etc. are destructive tests and cannot be continuous. The test time shall be less than 3S for a long time; | |||||
Parameters of LED lighting lamp and warning lamp | Lamp power | --- | 2W | --- | |
Color temperature | 2800K | 3000K | 3200K | ||
Working mode | Normally on: short press the constant once, and then short press once to turn off SOS flashing: short press for 2 consecutive flashes, short press once to change the constant, and then short press once to turn off. | ||||
Wireless charging parameters | Power | --- | 5W | --- | 5V/1A |
Energy storage battery pack parameters Battery type: 3.7v/18650 ternary lithium battery | Rated voltage | --- | 11.1V | --- | |
Battery capacity | --- | 26Ah | --- | Optional upon request | |
--- | 288.6 WH | --- | |||
Cell internal resistance | --- | 25mΩ | 40mΩ | ||
0.5c discharge ≥ 23.4ah | |||||
Project | Minimum | Standard | Max | Remarks | |
System protection function | Low power protection | 8.9V | 9.2V | 9.5V | When the discharge voltage reaches the low voltage, the product stops working |
Charging high temperature protection | 45ºC | 50ºC | 55ºC | If the cell temperature exceeds this range, it is forbidden to charge the battery. | |
Charging high temperature protection recover | 40ºC | 45ºC | 50ºC | Automatic recovery | |
Charging low temperature protection | -5ºC | 0ºC | 5ºC | It is forbidden to charge the battery when the battery temperature is lower than or equal to 0 ºC. | |
Charging low temperature protection recover | 0ºC | 5ºC | 10ºC | Automatic recovery | |
Discharge high temperature protection | 60ºC | 65ºC | 70ºC | If the cell temperature exceeds this value, it is prohibited to discharge the battery. | |
Discharge high temperature protection recovery | 55ºC | 60ºC | 65ºC | It cannot be restored automatically. Press the key to restore. | |
Discharge low temperature protection | -10ºC | -15ºC | -20ºC | ||
Discharge low temperature protection recovery | -5ºC | -10ºC | -15ºC | It cannot be restored automatically. Press the key to restore. | |
Working environment parameters | Operating temperature | 0ºC | --- | 40ºC | Ambient temperature for normal operation of the product |
Storage temperature | -20ºC | --- | 45ºC | The product does not work within the storage temperature range and is suitable for storage | |
Operating humidity | 10% | --- | 90% | Ambient humidity for normal operation of the product | |
Storage humidity | --- | 45% | The product does not work within the storage humidity range and is suitable for storage |
Q1. Are you a manufacturer or trading company?