Easy Spraying Nc Wood Varnish Lacquer for Furniture Coating Door Paint
China Easy Spraying Nc Wood Varnish Lacquer for Furniture Coating Door Paint, Find details about China Sanding Sealer, Wood Coating from Easy Spraying Nc Wood Varnish Lacquer for Furniture Coating Door Paint
Basic Info.
Model NO.
NC
Substrate
Wood
Components
Solvent
Paint Film Property
Decoration
Formation Mechanism
Conversion Type
Colors
According to Maydos Color Chart
Application Tools
Brush or Spray Gun
Voc
Without
Smell
Low
Drying Time
Three Hours
Solid Content
50%
Use
Furniture Paint
Trademark
Maydos
Transport Package
3.5kg 16kg
Specification
International Standard
Origin
China
HS Code
32089090
Model NO.
NC
Substrate
Wood
Components
Solvent
Paint Film Property
Decoration
Formation Mechanism
Conversion Type
Colors
According to Maydos Color Chart
Application Tools
Brush or Spray Gun
Voc
Without
Smell
Low
Drying Time
Three Hours
Solid Content
50%
Use
Furniture Paint
Trademark
Maydos
Transport Package
3.5kg 16kg
Specification
International Standard
Origin
China
HS Code
32089090
Product Desciption
Profession Paint Supplier Since 1995-Maydos 1 Pack Nc Wood Varnish Coating for Wood Painting
Instructions/application recommendation of painting system:
1. Make sure all the surfaces are clean, dry and free from wax, grese, oil, etc;
2. For bare wood, sand it down in the direction of the grain until it's smooth. Start with 80# sandpaper, and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3. If you are using paint as the topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool.
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat is dry, sand it lightly with fine abrasive paper to remove any raised grain.
5. Brush or spray another coat of paint and allow it to dry.
6. Continue to apply coats of paint until you achieve the surface build-up that you desire.
7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with (synthetic) steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, Polish the surface with wax or furniture Polish.
Application Notice:
1. Application methods: Roller, brush or spray.
2. Mixing ratio of matched thinner as below:
3. Wear eye protector and rubber gloves to prevent exposure to paints;
4. This product is highly flammable liquid. Please pay special attention to protecting yourself from sensitization by inhalation or skin contact;
5. This product is for professional use only;
6. More information like manufacture date, Lot No., Net content, Expiring Date and so on, please refer to the product label.
Instructions/application recommendation of painting system:
1. Make sure all the surfaces are clean, dry and free from wax, grese, oil, etc;
2. For bare wood, sand it down in the direction of the grain until it's smooth. Start with 80# sandpaper, and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3. If you are using paint as the topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool.
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat is dry, sand it lightly with fine abrasive paper to remove any raised grain.
5. Brush or spray another coat of paint and allow it to dry.
6. Continue to apply coats of paint until you achieve the surface build-up that you desire.
7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with (synthetic) steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, Polish the surface with wax or furniture Polish.
Application Notice:
1. Application methods: Roller, brush or spray.
2. Mixing ratio of matched thinner as below:
| Model | Base | Thinner | Mixing Ration Base: Thinner |
| M8100 | NC Varnish(Glossy) | GMX43 | 1: 1 |
| M8103 | NC Varnish(Semi-Gloss) | GMX43 | 1: 1 |
| M8105 | NC Varnish(Matt) | GMX43 | 1: 1 |
| M8100D | NC Varnish(Primer) | GMX43 | 1: 1 |
3. Wear eye protector and rubber gloves to prevent exposure to paints;
4. This product is highly flammable liquid. Please pay special attention to protecting yourself from sensitization by inhalation or skin contact;
5. This product is for professional use only;
6. More information like manufacture date, Lot No., Net content, Expiring Date and so on, please refer to the product label.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......