Starter, also known as motor, converts the electric energy of battery into mechanical energy and drives the engine flywheel to rotate to realize the start of engine. As we all know, the starting of the engine needs the support of external force, and the car starter is playing this role. Generally speaking, the starter uses three parts to realize the whole starting process. The DC series motor introduces the current from the battery and makes the driving gear of the starter produce mechanical movement; The driving gear is meshed into the flywheel ring gear by the transmission mechanism, and can be disengaged automatically after the engine starts; The starter circuit is controlled by an electromagnetic switch. Among them, the motor is the main part of the starter, and its working principle is the process of energy conversion based on Ampere's law that we are exposed to in junior high school physics, that is, the effect of the force on the electrified conductor in the magnetic field. The motor consists of necessary armature, commutator, magnetic pole, brush, bearing and shell. Before the engine runs with its own power, it must rotate with the help of external force. With the help of external force, the process of engine transition from static state to self operation is called engine starting. There are three common starting modes of engine: manual starting, auxiliary gasoline engine starting and electric starting. Manual starting adopts the way of rope pulling or hand shaking, which is simple but inconvenient, and has high labor intensity. It is only suitable for some small power engines, and only reserved as a backup way in some cars; Auxiliary gasoline engine starting is mainly used in high-power diesel engine; Electric starting mode is easy to operate, quick to start, with the ability of repeated starting, and can be controlled remotely, so it is widely used in modern cars.

According to the working principle, starter is divided into DC starter, gasoline starter, compressed air starter, etc. DC starter is widely used in internal combustion engine, which is characterized by compact structure, simple operation and easy maintenance. Gasoline starter is a kind of small gasoline engine with clutch and transmission mechanism. It has high power and is less affected by temperature. It can start large internal combustion engine and is suitable for alpine regions. Compressed air starter is divided into two types, one is to drive compressed air into the cylinder according to the working order, the other is to use pneumatic motor to drive flywheel. The purpose of compressed air starter is close to that of gasoline starter, and it is usually used to start large internal combustion engine. DC starter is composed of DC series motor, control mechanism and clutch mechanism. It starts the engine specially, needs the formidable torque, therefore must pass through the electric current quantity is very big, achieves several hundred amperes. When the speed is low, the torque of DC motor is large, and when the speed is high, the torque gradually becomes small, which is very suitable for starter. The starter adopts DC series motor, and the rotor and stator are made of thick rectangular copper wire; The driving mechanism adopts the reduction gear structure; The control mechanism adopts electromagnetic magnetic suction mode

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Please feel free to contact us, we provide one-stop purchasing for auto parts and we have Mature after-sales system.