Products

Optic Fiber RoHS Compliant 100GB/S Cfp Lr4 10km Optical Transceiver

China Optic Fiber RoHS Compliant 100GB/S Cfp Lr4 10km Optical Transceiver, Find details about China Converter, SFP from Optic Fiber RoHS Compliant 100GB/S Cfp Lr4 10km Optical Transceiver

Model NO.
GFC-OLCCxxTXL-CD10
Delivery Time
3-7 Days
Warranty
3 Years
Distance
10km
Trademark
GFC
Transport Package
Antistatic Bag
Specification
100Gbps 10KM
Origin
Zhejiang China
HS Code
8517706000
Model NO.
GFC-OLCCxxTXL-CD10
Delivery Time
3-7 Days
Warranty
3 Years
Distance
10km
Trademark
GFC
Transport Package
Antistatic Bag
Specification
100Gbps 10KM
Origin
Zhejiang China
HS Code
8517706000

Product Features

  • Supports 103.1Gbps to 112Gbps bit rates
  • Duplex LC connector
  • Hot pluggable
  • 4x28Gb/s DFB-based LAN-WDM transmitter
  • 10x10G MLD electrical interface
  • Applicable for 10km SMF connection
  • Low power consumption, < 16W
  • Digital Diagnostic Monitor Interface
  • MDIO Communication Interface
  • Compliant with 100GBASE-LR4 and OTU4
  • Operating case temperature: Commerical:0 to 70 °C
 

Applications

  • OTN OTU4
  • 100GBASE-LR4 100G Ethernet
  • Other Optical link
 

Functional Description


GFC-OLCCxxTXL-CD10, 100G CFP2 LR4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four electric-absorption modulated lasers (EMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, 4 lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface.

Functional Diagram

Optic Fiber RoHS Compliant 100GB/S Cfp Lr4 10km Optical Transceiver
Absolute Maximum Ratings
 
ParameterSymbolMin.Max.UnitNote
Supply VoltageVcc-0.54.0V 
Storage TemperatureTS-4085°C 
Relative HumidityRH085% 
Rx Damage Threshold,per LanePRdmg5.5 dBm 

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

Recommended Operating Conditions

 
ParameterSymbolMin.TypMax.UnitNote
Data RateDR 103.2112Gb/s 
Supply VoltageVcc3.143.33.46V 
Operating Case Temp.Tc0 70°C 
 

Electrical Characteristics (Top=0~70ºC, Vcc=3.2~3.4V)
(Tested under recommended operating conditions,unless otherwise noted)
 
ParameterSymbolMinTypMaxUnitNotes
Supply CurrentIcc  5A 
Supply VoltageVcc3.2 3.4V 
Transmitter
Signaling rate per laneDRPL  11.2Gb/s 
Input differential impedanceRin 100 Ω 
Differential data imput swing per laneVin,pp  760mV 
Data input rise time toleranceTr24  Ps1
Data input fall time toleranceTf24  ps1
Electrical input eye mask defintion{X1,X2}
{Y1,Y2}		{0.2,0.5}
{136,380}		UI
mV		 
Power Supply Noise ToleranceVripPer CFP MSA Specification 
Receiver
Signaling rate per laneDRPL  11.2Gb/s 
Differential data output swing per laneVout,pp  760mV 
Data output rise time toleranceTr2480 ps1
Data output fall time toleranceTf2480 ps1
Electrical input eye mask defintion{X1,X2}
{Y1,Y2}		{0.2,0.5}
{136,380}		UI
mV		 
Power Supply Noise ToleranceVripPer CFP MSA Specification 
Notes:
1.20%~80%
Optical Characteristics (Top=0~70ºC, Vcc=3.2~3.4V)
(Tested under recommended operating conditions,unless otherwise noted)
 
ParameterSymbolUnitMinTypMax Notes
Transmitter
Signaling rate, each lane GBd25.78125 ±100 ppm100GBase-LR4,1
27.9525 ±20 ppmOTU4,1


Four Lane Wavelength Range		λ1

nm		1294.531295.561296.59 
λ21299.021300.051301.09 
λ31303.541304.581305.63 
λ41308.091309.141310.19 
Total launch powerPoutdBm  10.5100GBase-LR4
  10OTU4
Average launch power, each lanePavgdBm-4.3 4.5100GBase-LR4,2
-6 4OTU4,2
Optical modulation amplitude, each lane (OMA)2OMAdBm-1.3 4.5 
Difference in launch power between any two lanes (OMA) dB  5 
Extinction ratioERdB4  100GBase-LR4
4 6.5OTU4
Side-mode suppression ratioSMSRdB30   
Transmitter and dispersion penalty, each laneTDPdB  2.2 
 
Optical return loss tolerance dB  20 
Transmitter reflectance3 dB  -12 
Transmitter eye mask {X1, X2, X3, Y1, Y2, Y3}  {0.25, 0.4, 0.45, 0.25, 0.28, 0.4}100GBase-LR4
Optical Receiver Characteristics
Receive Rate for Each Lane Gbps 25.7812527.95253
Overload Input Optical PowerPmaxdBm5.5   
Average Receive Power for Each LanePindBm-10.6 4.54
Receiver Sensitivity(OMA)per lanePsens1dBm  -8.6 
Stressed Sensitivity(OMA) per lanePsens2dBm  -6.8 
Receiver Sensitivity in OMA for Each LaneSOMAdBm  -8.6 
Stressed Receiver Sensitivity in OMA for Each Lane dBm  -6.8 
Return LossRLdB-26   
Receiver Electrical 3dB upper cutoff frequency, per lane GHz  31 
Los De-AssertPddBm  -11.6 
Los AssertPadBm  -13.6 
Loss HysteresisPd-PadBm1   

Notes:
  1. Transmitter consists of 4 lasers operating at 25.78Gb/s each for 100GBASE-LR, 27.95Gb/s each for OTU4
  2. Minimum value is informative.
  3. Receiver consists of 4 photodetectors operating at 25.78Gb/s each each for 100GBASE-LR, 27.95Gb/s each for OTU4
  4. Minimum value is informative, equals min TxOMA with infinite ER and max channel insertion loss.
 

Package Dimensions

Optic Fiber RoHS Compliant 100GB/S Cfp Lr4 10km Optical Transceiver

Optic Fiber RoHS Compliant 100GB/S Cfp Lr4 10km Optical Transceiver
Optic Fiber RoHS Compliant 100GB/S Cfp Lr4 10km Optical Transceiver

 

You Might Also Like