Products

Braking Resistor 1200W, 3.9 Ohm

China Braking Resistor 1200W, 3.9 Ohm, Find details about China Aluminum Resistance, Braking Resistor from Braking Resistor 1200W, 3.9 Ohm

Model NO.
CAR
Quantity
Duplex
Shape
Square
Resistance change scale
Log Scale
Application
Medical Apparatus and Instruments
Brand
ROHM
Power Range
10W~6000W
Voltage Range
05kv-10kv
Resistance Range
0.1r-20kr
Operating Temperature
-55°c~+165°c
Function
Strong Overload Capacity
External
Use with Multiple AC Drives
Enclosure Type
Encapsulated
Model NO.
CAR
Quantity
Duplex
Shape
Square
Resistance change scale
Log Scale
Application
Medical Apparatus and Instruments
Brand
ROHM
Power Range
10W~6000W
Voltage Range
05kv-10kv
Resistance Range
0.1r-20kr
Operating Temperature
-55°c~+165°c
Function
Strong Overload Capacity
External
Use with Multiple AC Drives
Enclosure Type
Encapsulated
Braking Resistor 1200W, 3.9 Ohm
Serial number
 		Item
 		Capability  
require
 		Test method
1Resistance and resistance varianceR≥1Ω ±5%
R<1Ω ±10%		Accordance  with  JIS-C-5202 5.1
 
2Resistor temperature
Coefficient
 		R>20Ω,±260 ppm/ºC 
R≤20Ω,±400 ppm/ºC		To run within temperature range 
-25~200ºC, factor shall be in accordance with JIS-C-5202 5.2
 
3Rating load
 		Superficial temperature≤375ºC
 		Correctly mounted on 300×300×3mm plate aluminium ,accordance with JIS-C-5202  5.4
4Short term overload
 		No abnormality
ΔR≤±(2%R+0.05Ω) 
 
 		Application of 10 times higher than rating voltage for 5 seconds under the same invironment, accordance with JIS-C-5202  5.5
5Insulation resistance
 		No abnormality
R≥100MΩ
 		Insulation resistance shall be 100 MΩ or more between terminal and case when measured with DC 500V insulation resistance tester, accordance with JIS-C-5202  5.6
6Withstand voltage
 		No abnormality 
no destroying
ΔR≤±(0.1%R+0.05Ω) 
 		No abnormality shall be found when AC 2500V applied between terminal and case for 1 min, accordance wirh JIS-C-5202  5.7
7Terminal strengthNo abnormal or
Loosing		A static load of 100N in the direction of terminal for 30 seconds, accordance to JIS-C-5202 6.1.2(1)
8Vibration proof
 		No abnormal
ΔR≤±(0.1%R+0.05Ω) 		No mechanical damage shall be observed where vibration applied in a cycle of 10~55HZ 1.5mm wide in the three directions for 1 minute, keeping 2 hours in each direction.
Accordance  with JIS-C-5202  6.3

You Might Also Like