High Operation Pressure RO Membrane for Sea Water Treatment
China High Operation Pressure RO Membrane for Sea Water Treatment, Find details about China Spacer Tube (ST) Module, St Membrane from High Operation Pressure RO Membrane for Sea Water Treatment
Basic Info.
Construction
Spiral Wound Element with GRP
Trademark
RisingSun
Transport Package
Wooden Box
Origin
China
HS Code
84219990
Construction
Spiral Wound Element with GRP
Trademark
RisingSun
Transport Package
Wooden Box
Origin
China
HS Code
84219990
Product Desciption
RisingSun Membrane's Spacer Tube (ST) Module can be used for sea water desalination and waste water treatment. We can offer either reverse osmosis or nanofiltration membrane sheet in order to deal with different kinds of waste water.
Special Membrane Feed Spacer
We use a very special ladder type feed spacer, which only come into marginal contact with their neighbouring membrane sheet. In this way, the spacers are able to minimise the resistance that is exerted on the feed flow.
This special design also greatly reduces the build up of fouling materials compared with common element.
Special Configuration with flow direction
Features
1. Spacer tube (ST) module is high strength design, up to 120 bar operating pressure.
2. Open feed spacer with low flow resistance and concentration polarization.
3. Spiral wound structure with more membrane area.
4. Membrane is long using life.
5. Competitive price and fast delivery.
6. Cross replacements: Nanostone (Rochem), Pall.
STRO Membrane element specification (operation pressure 90bar)
Brine seal to be installed in flow direction on the low pressure side/element outlet side.
** RO3 test condition: 2,000mg/l NaCl solution at 15.5bar applied pressure, 15% recovery, 25ºC; RO5 test condition: 32,000mg/l NaCl solution at 55bar applied pressure, 8% recovery, 25ºC; NF2 test condition: 2,000mg/l MgSO4 solution at 7bar, 15% recovery, 25 ºC. There may have about ±15% change for individual module flow rate.
Performance specifications shown above are nominal values. Individual module permeate flow rate may vary based on inlet water condition.
Note: We could offer any membrane sheet to make ST membrane module, for example, STRO4-8035, STRO5-8035, STRO1-8042, STNF1-8042, etc.
Applications
Sea Water
Industrial Waste water
Traditional spiral wound RO/NF concentrates.
Landfill leachate
Why us?
1. Our Spacer Tube (ST) modules use high quality membrane sheet from USA.
(BW & SW membrane sheet), which can obtain a 99.5% rejection rate based on 120bar operation pressure.
2. We make membrane module in China, our cost is competitive.
3. We offer OEM service.
4. We have large production capacity so fast delivery.
5. Our ST module was used in the largest project in China, more than 2,000 pieces.
The performance is very good.
Our Team:
Special Membrane Feed Spacer
We use a very special ladder type feed spacer, which only come into marginal contact with their neighbouring membrane sheet. In this way, the spacers are able to minimise the resistance that is exerted on the feed flow.
This special design also greatly reduces the build up of fouling materials compared with common element.
Special Configuration with flow direction
 | Color Instruction Green: Feed Wate Blue: Permeate Red: Seals and O-rings On this ST module the feed is from the top. The feed water is diffused by the top seal plate to send the feed water evenly around the top of the membrane element. The feed water flows down through the membrane element, as it does pure water permeates and flows out thourgh centre collection device into the space around the tie rod and flows down to the permeates outlets. The concentrated feed water is channelled by the bottom seal plate to the bottom HP connection and out of the module. |
Features
1. Spacer tube (ST) module is high strength design, up to 120 bar operating pressure.
2. Open feed spacer with low flow resistance and concentration polarization.
3. Spiral wound structure with more membrane area.
4. Membrane is long using life.
5. Competitive price and fast delivery.
6. Cross replacements: Nanostone (Rochem), Pall.
STRO Membrane element specification (operation pressure 90bar)
| Type | STRO | STNF | |
| Model | STRO3-8035 | STRO5-8042 | STNF2-8042 |
| Membrane sheet type | RO3 | RO5 | NF2 |
| Effective membrane area (m2) | 25 | 27 | 27 |
| Construction * | Spiral Wound Element with GRP Outerwrap,Brine Seal | ||
| Feed flux range (m3/h) | 5.5-12 | 5.5-12 | |
| Recommend flux (m3/h) | 10 | 10 | |
| Permeate flux ** (m3/d) | 23 | 24 | 25 |
| Nominal rejection ** (%) | 98.5 | 99.5 | 98.0 |
| Minimum rejection (%) | 97.5 | 99.0 | 96.0 |
| Feed spacer | Special open type (ladder type) | ||
| Element Dry Weight | 18kgs | ||
| Max. element pressure drop (bar) | 1.0 | 1.0 | |
| Max. operation pressure (bar) | 90 | 90 | |
| Max. operation temperature (ºC) | 45 | 45 | |
| pH continuous operation | 3-11 | 3-11 | |
| pH CIP | 2-12 | 2-12 | |
| Chlorine tolerance (ppm) | ≤0.1 | ≤0.1 | |
Brine seal to be installed in flow direction on the low pressure side/element outlet side.
** RO3 test condition: 2,000mg/l NaCl solution at 15.5bar applied pressure, 15% recovery, 25ºC; RO5 test condition: 32,000mg/l NaCl solution at 55bar applied pressure, 8% recovery, 25ºC; NF2 test condition: 2,000mg/l MgSO4 solution at 7bar, 15% recovery, 25 ºC. There may have about ±15% change for individual module flow rate.
Performance specifications shown above are nominal values. Individual module permeate flow rate may vary based on inlet water condition.
Note: We could offer any membrane sheet to make ST membrane module, for example, STRO4-8035, STRO5-8035, STRO1-8042, STNF1-8042, etc.
| Model | 8035 | 8042 |
| Total tie rod length A (mm) | 1125 | 1305 |
| Vessel length B (mm) | 970 | 1150 |
| Vessel to top of frame D (mm) | 75 | 75 |
| Inlet & outlet connections (inch) | 1 inch Victaulic | 1 inch Victaulic |
| Permeate connection (mm) | 2 x G3/8"-90° elbow for 9mm hose | |
| Operation Pressure (bar) | 75 | 90 |
| Membrane module diameter C (mm) | 216 | 220 |
Applications
Sea Water
Industrial Waste water
Traditional spiral wound RO/NF concentrates.
Landfill leachate
Why us?
1. Our Spacer Tube (ST) modules use high quality membrane sheet from USA.
(BW & SW membrane sheet), which can obtain a 99.5% rejection rate based on 120bar operation pressure.
2. We make membrane module in China, our cost is competitive.
3. We offer OEM service.
4. We have large production capacity so fast delivery.
5. Our ST module was used in the largest project in China, more than 2,000 pieces.
The performance is very good.
Our Team:
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......