Products

Deutsch 9pin J1939 to Obdii Connector Cable for Truck

China Deutsch 9pin J1939 to Obdii Connector Cable for Truck, Find details about China Deutsch 9pin, J1939 from Deutsch 9pin J1939 to Obdii Connector Cable for Truck

Material Shape
Round Wire
Range of Application
LSOH
Certification
ISO9001, CE, UL, CCC, RoHS, VDE
Brand
Edgarcn
Trademark
Edgarcn
Transport Package
Box
Specification
40*30*23
Origin
China
HS Code
8544422900
Material Shape
Round Wire
Range of Application
LSOH
Certification
ISO9001, CE, UL, CCC, RoHS, VDE
Brand
Edgarcn
Trademark
Edgarcn
Transport Package
Box
Specification
40*30*23
Origin
China
HS Code
8544422900
Deutsch 9pin J1939 to OBDII Connector cable for Truck

1.voltage :dc 300v 5m ohm/10 ms
2.contact resistance:3.0 ohm MAX
3.100% open ,Short ,Mis-Wirs Testing
Deutsch 9pin J1939 to Obdii Connector Cable for Truck



Deutsch 9pin J1939 to Obdii Connector Cable for Truck

 


SAE standards documents on OBD-II

  • J1708 - Defines a standard used for serial communications between ECUs on a heavy duty vehicle and also between a computer and the vehicle.
  • J1850 - Defines a serial data protocol. There are two variants- 10.4 kbit/s (single wire, VPW) and 41.6 kbit/s (two wire, PWM). Mainly used by US manufacturers, also known as PCI (Chrysler, 10.4 kbit/s), Class 2 (GM, 10.4 kbit/s), and SCP (Ford, 41.6 kbit/s)
  • J1939 - Defines a data protocol for heavy duty commercial vehicles
  • J1962 - Defines the physical connector used for the OBD-II interface.
  • J1978 - Defines minimal operating standards for OBD-II scan tools
  • J1979 - Defines standards for diagnostic test modes
  • J2012 - Defines standards trouble codes and definitions.
  • J2178-1 - Defines standards for network message header formats and physical address assignments
  • J2178-2 - Gives data parameter definitions
  • J2178-3 - Defines standards for network message frame IDs for single byte headers
  • J2178-4 - Defines standards for network messages with three byte headers*
  • J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
  • J2411 - Describes the GMLAN (single-wire CAN) protocol, used in newer GM vehicles. Often accessible on the OBD connector as PIN 1 on newer GM vehicles.
DEUTSCH HD10 series connector 

The HD series is an environmentally silicone rubber sealed, thermoplastic cylindrical connector, which is designed to be a faster, easier, trouble free assembly diagnostic connector in heavy-duty industry like truck, bus, cross-country vehicle,crane and forklift etc. When mated, the contacts are protected from water, dust, lubricating oils, fuel, road salt, grease, mud and other contaminants encountered.
  • Operating at temperatures -40ºC to +125ºC, no Cracking, Chipping or leaking after 20 test cycles from -40ºC~+125ºC.
  • No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G's at 10 to 2000Hz in each of the three mulually perpendicular planes for 2 hours. Force testing report as below shows
  • IP68 rating, waterproof withstand immersion under 1.2 meter of water for 24 hours.

Deutsch 9pin J1939 to Obdii Connector Cable for Truck
 
Cavity Overall Length
A		Overall Height
ØB		Overall Length
C		Overall Height
ØD
31.609 (40.87) 1.069 (27.15) 1.639 (41.63) .851 (21.62)
41.639 (41.63) 1.595 (40.51) 1.639 (41.63) 1.281 (32.54)
51.609 (40.87) 1.218 (30.94) 1.639 (41.63) 1.001 (25.43)
61.619 (41.12) 1.453 (36.91) 1.639 (41.63) 1.141 (28.98)
91.609 (40.87) 1.593 (40.47) 1.639 (41.63) 1.281 (32.54)

Deutsch 9pin J1939 to Obdii Connector Cable for Truck

HD10 series
 
PositionContact
Size		Rear
Threads		PlugReceptacle
Inline		Receptacle
Flange
3
 		16
 		no HD16-3-16S HD14-3-16P -
yes HD16-3-96S HD14-3-96P HD10-3-96P
44/16yes HD16-4-4S - HD10-4-4P
516no HD16-5-16S HD14-5-16P HD10-5-16P
616yes HD16-6-96S HD14-6-96P HD10-6-96P
612yes HD16-6-12S-B010 HD14-6-12P HD10-6-12P
9
 		16
 		no HD16-9-16S HD14-9-16P HD10-9-16P
yes HD16-9-96S HD14-9-96P HD10-9-96P
9 (J1939) 16yes HD16-9-1939S HD14-9-1939P HD10-9-1939P

COMPANY PROFILE

 
Deutsch 9pin J1939 to Obdii Connector Cable for Truck
☆ Privately held company, established in 1999
☆ Sales volume over 16 Million USD since 2017 
☆ OEM & ODM company, with employees more than 250 persons, 7260 square-meters in size 
☆ Service for economical solutions and innovative wire harnesses design & manufacturing 
☆IATF16949 (2016) & ISO 9001 (2015), and UL certified supplier with wiring No. E468011 & cable No. E479323
 
 
Deutsch 9pin J1939 to Obdii Connector Cable for Truck


CERTIFICATION


Deutsch 9pin J1939 to Obdii Connector Cable for Truck

Q&A   
 

1. Q: Can you help to design?
A: Yes, we are an ODM / OEM company, beyond we have been specializing in wire harness & Cable assembly since 1999.
2. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design. 
3. Q: What if quality issues occur when customer discover?
A: Our quality and engineer team will positively respond for the quality issues with 72 hours, as we are intend to make long-stand strategy with customer and the value is to provide better service.
4. Q: Do you have any standard products to cut down customers lead time for prototype and tooling cost?
A: Yes, there are over 1000 sets of molds and some of them can be used for customer directly. Moreover, Edgar is specialized in wire harness over 20
years with  5000+  products

CONTACT US

 
 

You Might Also Like