Atlas Copco 3" 4" 5" 6" 8" Down The Hole DTH Drill Hammers and Bits DHD380 Concave Bit

China Atlas Copco 3" 4" 5" 6" 8" Down The Hole DTH Drill Hammers and Bits DHD380 Concave Bit, Find details about China DTH Bit, Drill Bit from Atlas Copco 3" 4" 5" 6" 8" Down The Hole DTH Drill Hammers and Bits DHD380 Concave Bit

Basic Info.

Trademark

Super Diamond

Specification

130 - 156 mm

Origin

China

HS Code

8412310090

Trademark

Super Diamond

Specification

130 - 156 mm

Origin

China

HS Code

8412310090

Product Desciption

Description:
DTH Drill Bits are produced from premium quality nickel-alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special "stress relief" processes ensure consistent performance.
DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate.
Our bits are interchangeable with Atlas Copco's COP32 34 44 54 64 84, Ingersoll-Rand 's DHD3.5,DHD3.5HD, DHD 340A , DHD350R, DHD 360, DHD380 QL40, QL50 , QL60, QL80.NUMA100, NUMA120, MISSION60,ects

Technical Parameters ( BROCA PARA MARTILLO DE FONDO Drill Bits )
Diameter		No x Button diameter, mm		Button angleº	Flushing holes	Weight(kg)	Part No
mm	inch	Gauge Buttons	Front Buttons	Button angleº	Flushing holes	Weight(kg)	Part No
76	3	6*13	4*10	38	2*12	3.5	CD-25-76
80	3 1/8	6*14	4*11	38	2*12	3.8	CD-25-80
82	3 1/4	6*14	4*11	38	2*12	3.9	CD-25-82
90	3 9/16	8*12	5*12	38	2*12	4.3	CD-25-90

Atlas Copco 3" 4" 5" 6" 8" Down The Hole DTH Drill Hammers and Bits DHD380 Concave Bit

DTH drill bits
1. Customized acceptable
2. Bit diameter, face shape
3. Carbide button shape
4. Qty of air hole

Atlas Copco 3" 4" 5" 6" 8" Down The Hole DTH Drill Hammers and Bits DHD380 Concave Bit

Carbide button shape selection:
1. Domed/Round Button
Domed/Round Buttons are usually used as gauge buttons of DTH Bits, suitable for every abrasive and very hard formations.
2. Parabolic/Semi-Ballistic Buttons
Parabolic Buttons are usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations.
3. Ballistic Button
Ballistic Buttons are usually used as front buttons of DTH Bits, suitable for medium abrasive and mesium hard formations. They can also be used as gauge buttons if the rock is soft.
4. Sharp Button
Sharp Buttons are usually used as front buttons of DTH Bits for soft formations where fast penetration rates are possible.
5. Flat Button
Flat buttons are usually used as protection buttons to reduce wear on rubbing surfaces of DTH bits.