Quicky-Tech 6A is a one-component acetic silicone sealant with general-use, which can be used to meet a varity of sealing needs including glass, plastic, wood, ceramic etc. It is easy to use, economy and has the well adhesion for numerous building materials.


Product Introduction
Off acetic acid type, one-component, low modulus and easy to use.
Strong bonding to most building materials.
Good tensile and compressive resilience.
Relatively good water resistance.
Excellent quality with competitive price.


Application:
Adhesion of aluminum and glass doors, windows sealed.
Installation of all kinds of glass doors and windows.
Adhesive sealing of joints of aluminum, glass, ceramics and other materials.
Other multi-purpose.

Technical Data 


How to use:
Using acetone or other solvents to clean the to be bonded material's surface.
Pasting low viscosity tape in the place needed to protected.
Triming and removing the tape before the glue has not been cured.



Restriction:
Do not construction on the wet surface.
Do not used on the oil or oil leakage surface.
Do not used one the surface of the exudate.

Directions for use:
Ensure all the surfaces to be sealed are clean, dry and grease-free.

Cut off the tip of the small threaded protrusion on top of the tube. Screw the pointed nozzle to the remaining.


Apply sealant with caulking gun. The sealant will form a layer on the surface in approximantely 10 minutes at 25 degree and will be dry to touch in 1 hour. It will be fully cured in 24-48 hours depending on the surfaces to be sealed.

Warning:
Ensure good ventilation when used indoors. Avoid direct contact with skin. If exposed to eyes, flush with water and consult with a physician immediately. Keep out of reach of children.
Do not use for structural glazing applications.



Storage:
Packing: 300ml
Colour: Clear White Black Bronze Grey
Storage: Temperature should not exceed 30 degree for prolonged periods.
Caution: Use within 9 months.