Soft Magnetic Alloys Wire 1J80 / FeNi 80 / Ni80Cr3Si

China Soft Magnetic Alloys Wire 1J80 / FeNi 80 / Ni80Cr3Si, Find details about China Soft Magnetic Alloys Wire Feni80, 1j80 Wire from Soft Magnetic Alloys Wire 1J80 / FeNi 80 / Ni80Cr3Si

Basic Info.

Model NO.

SMTK 80-W

Certificate

Magnetic( Permeability and Magnetic Induction)

Diameter

0.1~10mm

Trademark

SMTK 80-W

Transport Package

Wooden Case

Specification

as request

Origin

China

HS Code

750522000

Model NO.

SMTK 80-W

Certificate

Magnetic( Permeability and Magnetic Induction)

Diameter

0.1~10mm

Trademark

SMTK 80-W

Transport Package

Wooden Case

Specification

as request

Origin

China

HS Code

750522000

Product Desciption

Soft magnetic alloys 1J80 / FeNi 80 / Ni80Cr3Si:

In the power industry, mainly in the high magnetic field has a high magnetic induction and low core loss of the alloy. In the electronics industry, mainly at low or medium alloy having a high magnetic permeability and low coercive force. At high frequencies shall be made on a thin strip or alloy higher resistivity. Usually with sheet or strip.

Soft magnetic materials in exchange for use, due to the alternating magnetic eddy currents are induced inside the material, resulting in the loss, the smaller the resistance of the alloy, the greater the thickness, the higher the frequency of the alternating magnetic field, eddy current losses greater, magnetic reduce more. For this, the material must be made thinner sheet (tape), and the surface coated with an insulating layer, or the use of certain methods to the surface to form an oxide insulating layer, such alloys commonly used magnesium oxide electrophoresis coating.

Iron-nickel alloy mostly in the alternating magnetic field use, mainly for yoke iron, relay, Small Power Transformers and Magnetically shielded.

The following are details of our products 1J80:

If you have any questions about our product 1J80, Tankii glad to answer all at any time!

Have a good day!