China 21V -36V 0-10V 1-10V Dimming Variable Driver 2100mA Constant Current LED Driver, Find details about China 2100mA Constant Current LED Driver, Dimming Variable Driver 2100mA from 21V -36V 0-10V 1-10V Dimming Variable Driver 2100mA Constant Current LED Driver
Feature
· Output constant current.
· Universal AC input:100-265VAC
· Built-in active PFC function
· High efficiency up to 86%
· Protections:Short circuit/Over current/Over loading
· Cooling by free air convection
·IP66 design for indoor or outdoor installation
· Class 1 power unit
· Three in one dimming function(0/1-10Vdc or PWM signal or resistance)
· Dimming range: 0-100%
· Suitable for LED lighting and moving sign applications
· Compliance to worldwide safety regulations for lighting
· Three years warranty
Specification
Model | KI-85900--A-DIM | KI-751050-A-DIM | KI-551400-A-DIM | |
Output | DC Current | 900mA | 1050mA | 1400mA |
Current Tolerance | ±5% | |||
Output voltage range | 51-85V | 45-75V | 33-55V | |
Rated power | 76.5W | 78.8W | 77W | |
Open circuit voltage(Max) | 90V | 80V | 60V | |
Input | Voltage Range | 100~265VAC | ||
Frequency Range | 47~63HZ | |||
Power Factor | PF≥0.95/120VAC PF≥0.90/230VAC PF≥0.88/265VAC(Full loading) | |||
Efficiency(Typ.) | 86% | 86% | 86% | |
AC Current(Max.) | 0.83A | 0.83A | 0.81A | |
Leakage current | <0.5mA | |||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | ||
Over Loading | ≤120% | |||
Over temperature | 100ºC±10ºC, Shut down o/p voltage, recovers automatically after temp. goes down. | |||
Environment | Working TEMP. | -40~+60ºC | ||
Working Humidity | 20~95%RH non-condensing | |||
Storage TEMP.,Humidity | -40~+80ºC,10~95%RH | |||
TEMP.coefficient | ±0.03%/ºC(0~50ºC) | |||
Vibration | 10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axes | |||
Others | Net.Weight | 0.95Kg | ||
Size | 200*70*60mm(L*W*H) | |||
Packing | 330*280*176mm 10PCS /CTN | |||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25ºC of ambient temperature. 2. Tolerance:includes set up tolerance,line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation,the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |