10.4 TFT LCD Touch Screen Sedation S8800 Nitrous Oxide System for Good Price
10.4" TFT LCD touch screen displays the Ventilation parameters,Alarming information and Waveform.
With built-in backup power source, when outside power source goes off, back-up power source starts to work
Timing function for recording time and controlling operation
Electronic control mixed gas blender, high precision adjustment
Ventilation mode: Continuous gas supply, On-demand gas supply , Rapid oxygen supply, MANUAL
Oxygen concentration: 30%-100%
N2O concentration: 0%-70%
Alarm and protection: 13 kinds of alarms and protection functions
Oscillogram: P-T, fiow histogram Gas supply
- Gas source O2(For medical use)
N2O(For medical use)- Input pressure range 280 kPa~600 kPa
- Negative pressure gas source flow ≥75 L/min
(when equipped with Transfer and receiving system of anaesthetic gas scavenging system) Power supply
- Voltage 100-240 V~
- Frequency 50 HZ/60 HZ
- Input power 60 VA
- Internal battery DC11.1V 5200mAh
- Fuse
--Main power T2AH 250V--Internal power T4AH 250V Ventilation parameters
- O2 concentration
--Adjusting range 30 %~100 %(v/v)--Allowable error ± 15 %, and minimum O2 concentration ≥30 %- N2O concentration
--Adjusting range 0 %~70 %(v/v)--Allowable error ± 15 % or ± 3 %(v/v), whichever is the greater, and maximum N2O concentration ≤70 %- Continuous flow
--Adjusting range 0 L/min ~ 40 L/min- As required flow
--Adjusting range 0 L/min ~ 40L/min- Pressure trigger
--Adjusting range -1 cmH2O~ -10 cmH2O--Allowable error ±(1 cmH2O +10 % setting valve)- Gas supply time
--Adjusting range 1 s ~ 6 s--Allowable error ± 20 %- Output gas flow from manual ventilation
--Adjusting range 0 L/min ~ 40 L/min- Flow rate of oxygen flush valve 25 L/min ~ 75 L/min
- Maximum gross flow ≥ 60 L/min
Ventilation parameter Monitoring
- O2 concentration
--Monitoring range 30 % ~ 100 %--Allowable error ±(2.5 % v/v+2.5 % concentration level)- Airway pressure
--Monitoring range 0 cmH2O ~ 60 cmH2O--Allowable error ±( 2%full scale + 4%actual reading )- Continuous flow and as required flow
--Monitoring range 0 L/min ~ 40 L/min--Allowable error >3.0 l/min:± 20 %, ≤3.0 l/min: ± 0.6 l/min- Waveform display:
--Time- airway pressure- Alarm of low voltage of back-up battery
When the voltage of back-up battery is low, the power state indication place will display the signal of "", and there will be a sound alarm.Alarm lasting time: >60 s! Warning:
If battery power fails during operation, please switch off the machine and do manual ventilation to the patient.
- Alarm of low pressure for input N2O
When the pressure of input N2O is under (180 ± 20) kPa, there will be a sound alarm and display of Low pressure for input N2O.- Alarm of low pressure for input O2
When the pressure of input O2 is under (180 ± 20) kPa, there will be a sound alarm and display of Low pressure for input O2.- High O2 alarm
When the monitoring value of O2 concentration over the upper limit of O2, there will be a sound alarm and display of O2 high.--Setting range 31 % ~ 100 % - Low O2 alarm
When the monitoring value of O2 concentration under low limit of O2 concentration, there will be a sound alarm and display of O2 low.--Setting range 30 % ~ 99 % - High Ppeak alarm
When the monitoring value over the upper limit of Ppeak, there will be a sound alarm and display of High Paw pressure.--Setting range 5 cmH2O ~ 60 cmH2O- Pressure limit
When the airway pressure is over the set pressure limit, there will be a sound alarm and display of High Paw pressure, and he pressure will be limited under the set value.--Allowable error ±5 cmH2O- Protection for insufficient O2 supply
When O2 supply pressure is lower than 200 kPa, NO2 shutoff valve will shut off NO2 supply. - Maximum limit pressure
The safety valve will be on when the Paw is over the set maximum limit pressure.--Maximum limit pressure ≤60 cmH2O±5 cmH2O- Emergency air intake valve
Emergency air intake valve will be on when the Paw is during -2cmH2O ~ -8 cmH2O. - Gas supply safety valve
Gas supply safety valve will exhaust when O2 or N2O supply pressure is over (750 ± 100) kPa. - Mute
When an alarm occurs, the alarm sound may be muted by pressing AUDIO PAUSED key, but the alarm indication will display on the screen, unless the problem is solved.--Muting time <120 s