EPS and Meneral Wool Sandwich Panel Production Line

China EPS and Meneral Wool Sandwich Panel Production Line, Find details about China Sandwich Panel Line, EPS from EPS and Meneral Wool Sandwich Panel Production Line

Model NO.
1000
Certification
CE, ISO
Condition
New
Customized
Customized
Color
Blue or as Your Requirements
Size
9.5m*1.4m*2.1m
Material
EPS
Serve
Engineers Can Serve Machine Oversea
Control System
PLC
Automatic
Yes
Type
Steel
Method
Hydraulic Pressure
Processing
Brick Molding Machine
Product
Tile
Trademark
JCX
Transport Package
According to Customers′ Request
Specification
Jcx
Origin
China Hebei
HS Code
8455211000
Model NO.
1000
Certification
CE, ISO
Condition
New
Customized
Customized
Color
Blue or as Your Requirements
Size
9.5m*1.4m*2.1m
Material
EPS
Serve
Engineers Can Serve Machine Oversea
Control System
PLC
Automatic
Yes
Type
Steel
Method
Hydraulic Pressure
Processing
Brick Molding Machine
Product
Tile
Trademark
JCX
Transport Package
According to Customers′ Request
Specification
Jcx
Origin
China Hebei
HS Code
8455211000

    high speed  sandwich panel production line
        
EPS and Meneral Wool Sandwich Panel Production Line
EPS and Meneral Wool Sandwich Panel Production Line


 
 Brief Introduction
 Sandwich panel production line is used for the special purpose of producing the new type constructional material (Sandwich panel), with the function of compounding EPS or Rock wool board to the color steel sheets.  
Sandwich panel is very light weight. (1/40 to 1/10 of common brick).It is high strength, warm conservation, water proof, convenient for construction, short construction period etc.  
As the ideal constructional material, they can be used to build warehouses, workshops, wide range roofing, air-conditioned houses and so on.  
 
 
 
 EPS and Meneral Wool Sandwich Panel Production Line

 
 Main component parts and Work flow
  
 
 
Upper De-coiler→Forging→Glue dropping→Glue mixing→EPS→Milling→Under De-coiler→Forging→Glue dropping→Glue mixing→Compound→Folding→Cutting→Supporting table
 
 
The whole line is consisted by the following equipments:
 
1.Profile forming machine   
2.Compound forming machine 
3.Cutting machine 
4.De-coiler   
5.Supporting table   
6.Assistant equipments
 
 

1.Parameters of the production line:
 
1.Product thickness: 40-250mm
 
2.Raw material thickness: 0.27-0.8mm
 
3.Raw material: (under side) color steel, pvc, aluminized paper
 
4.Voltage:380v/50~60HZ,3phases
 
5.Production capacity
 
       4-4.5m/min (the fastest) ,2-2.5m/min(the slowest) 
 
6. Total power: about 30KW 
 
7. Weight: 40ton
 
8. PLC control system, easy to operate, high precision and work stably.
 
9. Dimensions of whole production line: 
 
          Length  45000mm × Width  2500mm × Height  2600mm
 
 
Product Description
 
 
Technical Specification:
 

NO

 

Technical Specification & Remark 

1.

Manual de-coiler

The decoiler can be adjusted according to the inner diameter of the coil.
Max.capacity:      5000kg

2.

Feeding platform
 

Function and feature: put the raw material (steel plate) on the plat to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.

3.

Forming machine
 

In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission, roller surfaces polishing, hard planting, heat treatment and galvanization treatment. The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Rolling galvanization thickness:0.05 mm
Rolling material:    45 #  Forging  Steel

4.

composite system
 

 

5.

Shearing mechanism
 

It adopts steam pump and PLC control system to work automatically.
 

6.

Computer control cabinet
 

It adopts industrial computer to control. The target piece's length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
PLC control boxes: one is for the composite system and the other is for cutting system.

7.

Counter
 

One counter gauges length, pulses, and decides length.

8.

Output table

To receive the ready sandwich panel

 
 
 Profile forming machine:
 
 
 
 
a. Raw Material: 1200mm wide, 0.2~0.8mm thick steel sheet
b. Number of forming steps: 14
c. Outer diameter of shaft: Φ75mm
d. Motor power:  2.2 KW
e. Forming speed: 4-5m/min
f. Dimension: 8.0*1.3*1.2 mm
 
 
2 Compound forming machine:
 
 
 
It includes the frame,decoiler, glue mixing, guiding device, electric heating device, dust collecting device and electrical controlling device.
 
a. Frame: There are altogether three sets of roller frames, with several rubber rollers on each frame.  The rubber rollers are on the same lever, when producing profile sandwich panels you have to raise one roller frame and put in the attached blocks, while producing flat panels, you only need to remove the blocks. 
 
 
b. Decoiler:  
 
The tension of both upper coil sheet and down coil sheet is kept moderately by frictional brake.
 
 EPS and Meneral Wool Sandwich Panel Production Line
c. Glue mixing device: Glue is provided by the calculate pump and dropped onto the coil sheets evenly through glue dropping pipes.  Then it is mixed by the upper and down glue mixing devices.  Comparing with spraying way, glue dropping and mixing is easier to operate, reduces air pollution and releases workers from high strength work.
 
 
d. Guiding device: Two guiding devices are set, the upper one adopts stainless steel roller of large diameter, it could adjust the width; the below one adopts easy operated screw thread.
 
 
 
e.Electrical heating device: 6 electrical infrared heating devices ensuring high quality sandwich panel can be produced at low temperature.
 
 
 
f. Dust collecting device: collecting all the scrap in production
 
g. Electrical controlling device: Electrical-controlling device for compound forming machine is composed with AC contactor and transducer, velocity of compound forming machine and the glue pump is controlled by transducer, it can also form a synchronous device with the profile forming machine.
 
 
 
  3 Cutting Part: 
    
 
 
Full automatic: set with PLC, touch screen, encoder (specially ordered)
 
 
 
 
 
4.De-coiler
 
 
a. coil inner diameter: 500mm or 600mm
 
b. maximum width of coiling: 1500mm
 
5.Supporting table.
 
2 set, 2m per set.
 
 EPS and Meneral Wool Sandwich Panel Production LineEPS and Meneral Wool Sandwich Panel Production LineEPS and Meneral Wool Sandwich Panel Production LineEPS and Meneral Wool Sandwich Panel Production LineEPS and Meneral Wool Sandwich Panel Production LineEPS and Meneral Wool Sandwich Panel Production Line
 

EPS and Meneral Wool Sandwich Panel Production Line
 
 
6. Parameter of electrical control part 
 
 
 
 
 
 
 
 
Packaging & Shipping
 
 
As nomal it should be naked ,but we can pack the machine as your requirement.
as nomal the machine need take 40~50 days to finish after you make a order.
 
 
 
 
 
Our Services
 
 
 our engineers available to serve the machine oversea one year for free.