• 1. 4 Way SDI Splitter, Distributes 1 SDI signal to 4 simultaneous SDI output signals identical to the original input which is displayed on four devices simultaneously.
• 2. Supports 3 SDI standards, Support SD-SDI(270Mbps), HD-SDI(1.485Gbps) and 3G-SDI(2.97Gbps) and distribute to 4 simultanous SDI outputs.
• 3. With SDI repeater function, Providing equalized and re-cloked transmission,and supporting signal input and output distances of up to 1320 ft for SD-SDI signal, 660 ft for HD-SDI signal and 330 ft for 3G-SDI signal by Belden 1695A cable.
• 4. Support Hight Resolution, Support SD 480i, 576i and 625i, HD 720p @24/25/30/50/60, HD 1080i @50/60, 3G 1080p @24/25/30/50/60.
• 5. Supports Wide Voltage, Support DC 5-12V voltage input(lowest power is 5V) which is more suitable for SDI camera and projectors, and allows you-Inch view the original SDI content on an SDI monitor simultaneous with the HDMI display.
• 6. With Lock and Power Indicator LED, Status LED indicate the using status of the splitter.

Introduction:

• This SDI 1×4 Splitter can distribute 1 SDI signal to 4 SDI signals output, it allows output interfaces to be connected to 4 SDI monitors and show the same picture. Built-in equalizer supports extending the transmission for long distance. The splitter also can separate the audio signal from the SDI signal.

Features:

• 1. Distribute 1 SDI input signal to 4 SDI output signals.
• 2. Adopt 24bit/192KHz DAC chip to ensure high quality sound. (The splitter only supports the sampling frequency of 48khz)
• 3. Transmission without loss of signal.
• 4. Support DC 5V-12V wide voltage input.
• 5. Low power consumption, low demand for power adapter.
• 6. Input status LED indicate the using status of the splitter.
• 7.Connect multiple splitters together can realize long distance transmission and multiple interface expansion function.

Specification:

• SMPTE Standard: 425M Level A&B, 424M, 292M, 259 M-C
• SDI Transmission Rate: 270Mb/s(SD),1.485Gb/s(HD),2.97Gb/s(3G)
• Input/Output Resolution:
• SD:480i@60, 576i@50, HD:720p@50/60, 1080i@50/60, 3G:
• SDI Output Resolution: Depends on Input Resolution:1080p@24/25/29.97/30/50/59.94/60
• Audio Sampling frequency: 48KHZ
• Input Interface: 1xBNC(SD/HD/3G-SDI)
• Output Interface: 4xBNC(SD/HD/3G-SDI), 1x3.5mm Audio Interface
• 3G SDI Transmission Cable:
• Input up to 100m, output up to 80m
• Input up to 80m, output up to 100m
• Input Voltage: DC 5V-12V
• Maximum Power Consumption: 1.5W
• ESD Protection Human Body Model:
  ±8kV(Air-gap Discharge)
  ±4kV(Contact Discharge)
• Operating Temperature Range: -10~+55ºC
• Storage Temperature Range: -20~+60ºC
• Operating Humidity Range: 10~90%RH(No Condensation)
• Storage Humidity Range: 5~95%RH(No Condensation)
• Shell Dimension: 125*66.5*22(mm)
• Weight: 230g

Note:

• Only Support BNC to BNC 75-ohm Coax Cable;(Not Included)
• Not Support BNC to BNC 73-ohm Coax Cable;
• We Suggest to Use Belden 1694A BNC to BNC Full HD 75-ohm Coax Cable, It will Make Better Effect.