Vet Clinic Hospital Use Anesthesia Machine Veterinary
10.4" screen displaysinformation area,alarm area, monitoring area,setting information
electronic flowmeter,instantly know the fresh gas flow to animals.
Real time pressure-time,flow-time loop oscillogram and high precision ETCO2,O2concentration detection function included
ETCO2 module and Anesthesia Gas Scavenging System (AGSS)are optional
Ventilation mode: IPPV, A/C,PCV,SIMV,SIGH,MANUAL
Vt:0,20-1500ml
I;E:4:1-1:8
Gas source:N2o and O2
Oscillogram:P-T,F-T,P-V loop,V-T,ETCO2-T
Gas supply
- Gas supply O2(For medical use)
N2O(For medical use)- Input pressure range 280 kPa~600 kPa
- Output pressure of regulator
(gas cylinder supply) less than 440 kPa- Safety valve 750kPa
- Negative pressure air source ≥75 L/min
Flow rate
- Adjust range of flow meter
O2 0 L/min~10 L/minN2O 0 L/min~10 L/min- precision(20ºC 101.3kPa,supply pressure 440 kPa)
The precision from 10 % of full scale to full scale is ±10 % of indicated valueThe precision lower than 10 % of full scale is class 4.- Linkage control of O2 and N2O flow rate
Adjust O2 concentration to no less than 25 % according to proportion.- Flow rate of oxygen flush valve 25 L/min~ 75 L/min
Power supply
- Voltage 100-240 V ~
- Frequency 50/60 HZ
- Input power 80VA
- Fuse
--Main power T2AH 250V--Internal power T4AH 250V Ventilation mode
--IPPV--A/C--SIMV --PCVVentilation parameters
Specification
- Frequency
--Adjusting range 1 bpm ~ 100 bpm(Under SIMV:1 bpm~ 40 bpmAll mode except SIMV:VTH 4 bpm~40 bpmVTL 20bpm~100 bpm )--Allowable error ± 15 %- Inhalation time(I:E)(Tinsp)
--Adjusting range VTH 4:1(1:0.25) ~ 1:8 VTL 2:1(1:0.5) ~ 1:8Tinsp 0.2s ~ 12.0s--Allowable error ± 15 % or ± 0.1 s,whichever is the greater- Tidal volume(VT)
--Adjusting range 0,20 mL ~ 1500 mLAnd: VTH 250 mL ~ 1500 mL VTL 0,20 mL ~ 300 mL- Minute ventilation(MV)
--Max MV VTH ≥18 L/minVTL ≥10 L/min- PEEP
--Adjusting range 0 kPa ~ 3kPa-- Allowable error ±15 % or ±(0.3 kPa+10 % setting valve)whichever is the greater- Pressure trigger(PTr)
--Adjusting range - 2.0 kPa ~ 0kPa(Under PEEP)--Allowable error ±(0.1 kPa+10 %setting valve)- Flow trigger(FTr)
--Adjusting range OFF, 0.5 L/min ~ 30 L/min--Allowable error >3L/min: ±20%≤3L/min: ±0.6 L/min- Pressure control(Pc)
--Adjusting range 0.5kPa ~ 6.0 kPa-- Allowable error ± 15 % or ±(0.3 kPa+10 % setting valve)whichever is the greater- Holding time(Inhalation platform)(TIP)
--Adjusting range 0 ~ 6s(0% ~ 50% of inhalation time)--Allowable error ± 15 % or± 0.1 s,whichever is the greater- Sigh
--Adjusting range 0, 1/100 ~ 5/100 (Sigh tidal volume is 1.5 to 2 times higher than setting valve of tidal volume)- Apnea ventilation
--Adjusting range OFF,5 s ~ 60 s- Max set working pressure(pressure limit range)
--Adjusting range 3kPa ~ 10kPa--Allowable error ± 15 % or ±(0.2 kPa+10 % setting valve)whichever is the greaterMax pressure ≤12.5 kPaexplanation:
1) set pressure limit value to produce maximum working pressure( the upper limit of high airway pressure alarm).
2) do not use negative pressure at exhalation.
3) maximum limit pressure is pressure of the safety valve.
Driven gas
- Gas supply O2(For medical use)
- Input pressure range 280 kPa ~ 600 kPa
Fresh gascompensation
- Compensation range 0 ~ 15 L/min
- gas composition O2, N2O and anaesthetic
Ventilation parameter Monitoring
- The following are monitoring parameters under the environment of body temperature and pressure-saturated.
- Minimum exhalation volume maybe monitored is 50 mL/min.
- Fig. display:
Parameter | Range | Resolving power | Accuracy |
Frequency(Freq) | 1 bpm ~ 100 bpm | 1 bpm | ±15 % |
Tidal volume(VT) | 0~ 2000 mL | 10 mL | >100 mL:±20% ≤100 mL:±0.02 L |
Minute ventilation(MV) | 0~100L/min | 0.1 L/min | >1L/min:±20% ≤1L/min:±0.5 L/min |
(Ppeak) | 0~100 cmH2O | 1 cmH2O | ±(4%full scale+4%actual reading) |
O2 concentration | 15 % ~ 100 % | 0.1 % | ±[ 2.5 %(v/v)+2.5 %(concentration level)] |
Compliance | 1~1000mL/ cmH2O | 1mL/ cmH2O | |
- Waveform display:
--Time-airway pressure(under all modes)--Time-flow(under all modes)--pressure volume loop(under all modes)--Time-volume(under all modes)--Time-CO2(under all modes)Remarks:The machine cannot record all the adjusting and monitoring values.