Woodworking Machinery Hydraulic Panel Turnover Machine for Plywood Making
China Woodworking Machinery Hydraulic Panel Turnover Machine for Plywood Making, Find details about China Overturning Machine, Board Reversing Machine from Woodworking Machinery Hydraulic Panel Turnover Machine for Plywood Making
Basic Info.
Model NO.
YFB48-I
Trademark
metro
Origin
China
HS Code
8419320000
Model NO.
YFB48-I
Trademark
metro
Origin
China
HS Code
8419320000
Product Desciption
PHOTOS SHOW:
SPECIFICATION:
For reference only. Take the actual situation as the criterion because of customized.
NOTE:
All our products can be customized according to different countries on the following facts:
1. Year production capacity.
2. Working shifts.
3. Automatic grade higher or lower.
4. Clients' personal requirements.
INTRODUCTION:
1.Equipped with top quality piston cylinders, mental tube and seamless steel pipes .
2. Characetrised by open only feed end and discharge end. The remaining is closed. Hot air streams inside the equipment. Low heat loss saving a lot of energy.
3. Flexible configuration. Drying more material in one time. Working continuously. Easy operation, labor.
4.Simple structure, easy installment. Workers can enter the box of equipment to check the bug. So maintance is conveninent.
CERTIFICATES:
SERVICES
PRE-SERVICE:
1) Provide the free consultation of the equipment.
2) Provide the standard device and the flow chart.
3) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory.
SERVICE DURING THE SALE:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
AFTER-SALE SERVICE:
1) 24 hours online service.
2) Provide the video with Install and debug the equipment.
3) Provide technical exchanging.
SPECIFICATION:
| model | YFB 48 - I |
| cylinder diameter and stroke | Φ100 x500 mm |
| max opening | 1250 mm |
| angle | 180° |
| overturning breadth | 2600 x 1250 mm |
| power | 3 + 1.5kw |
| Size | 2040 x 2100 x 2265 mm |
| weight | about 1870 kg |
NOTE:
All our products can be customized according to different countries on the following facts:
1. Year production capacity.
2. Working shifts.
3. Automatic grade higher or lower.
4. Clients' personal requirements.
INTRODUCTION:
1.Equipped with top quality piston cylinders, mental tube and seamless steel pipes .
2. Characetrised by open only feed end and discharge end. The remaining is closed. Hot air streams inside the equipment. Low heat loss saving a lot of energy.
3. Flexible configuration. Drying more material in one time. Working continuously. Easy operation, labor.
4.Simple structure, easy installment. Workers can enter the box of equipment to check the bug. So maintance is conveninent.
CERTIFICATES:
SERVICESPRE-SERVICE:
1) Provide the free consultation of the equipment.
2) Provide the standard device and the flow chart.
3) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
4) Welcome to visit our factory.
SERVICE DURING THE SALE:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
AFTER-SALE SERVICE:
1) 24 hours online service.
2) Provide the video with Install and debug the equipment.
3) Provide technical exchanging.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......