Cable entry protection:
1. Universal cable glands
2. Special cable clamp with strain relief,bell mouthed cable fitting and anti-twist devices
3. Cable gland with normal or multiple seal
4. Extensive range of accessories
Hoods:
1. low or high construction
2. Top or side cable entry .1 or 2 locking levers
Male insert with:
1. screw terminal or crimp terminal(order contacts separately) or cage-clamp terminal
Female insert with:
1. screw terminal or crimp terminal(order contacts separately) or cage-clamp terminal
Housing:
1. Housing(bulkhead mounting) with or without thermoplastic or metal covers,1 or 2 locking levers
2. Housing(surface mounting) low or high construction with or without thermoplastic or metal covers,1 or 2 locking levers,1 or 2
cable entries
3. Hood(cable to cable) low or high construction for cable to cable connections
Accessories:
1. Protective covers available
2. Code and guide pins for coding
3. Special insert fixing screws for use without hoods and housings
4. Label according to CSA-approval
Characteristics
Covers wide range of cross sections
Screw termination with wire protectionInsert |
Number of contacts | 10+PE |
Electrical data acc. to EN 61 984 | |
---Rated current | 16A |
---Rated voltage conductor | 500V |
---Rated impulse voltage | 6kV |
---Pollution degree | 3 |
---Pollution degree 2 also | 16A 400/690V 6kV 2 |
Rated voltage acc. to UL/CSA | 600V |
Insulation resistance | ≥1010Ω |
Material | polycarbonate |
Limiting temperatures | -40ºC...+125ºC |
Flammability acc. to UL 94 | V0 |
Mechanical working life(mating cycles) | ≥500 |
Characteristics:Two levers at the bottom part of the housing
* Secure locking ensured by four locking points
* Minimal space requirements and high locking force
* Ideal for laterally arranged connectors
Two levers on the hood
* Secure locking ensured by four locking points
* Minimal space requirements and high locking forces
* Ideal for laterally arranged connectors and surface-mounted housings with caps
One lever at the bottom part of the housing
* Two locking points along the longitudinal axis
* Easy to access even with cable entering laterally
* Cap on the upper part of the housing can be lockedHood&Housing |
Material | aluminium die-cast |
Colour | Grey |
Locking element | |
---Lever type | metal elastic pressing |
---Material | Stainless steel |
Hoods/Housing sealing | NBR |
Limiting temperatures | -40ºC...+125ºC |
Flammability acc.to UL 94 | V0 |
Degree of protection acc.to EN 60529 for coupled connector | IP65 |
Contacts |
Material | copper alloy |
Surface | hard-gold plated |
hard-silver plated |
Contact resistance | ≤1mΩ |
Crimp terminal | |
---Wrie gauge | 0.14-4.0mm2 |
---AWG | 26-12 |
---Stripping length | 7.5mm |
Cable gland |
| Metal cable gland | Plastic cable gland | Hose cable gland |
Material: | Nickel-plated brass | Nylon | Nylon |
Seal Material | NBR | NBR | |
Degree of protection | IP68 | IP68 | IP54 |
Temperature range | Stat:-40ºC-100ºC Dyn:-20ºC-80ºC | Stat:-40ºC-100ºC Dyn:-20ºC-80ºC | -40ºC-+150ºC |
Contact Removal Tool
Insert tool from the mating side of the connector until it comes to a stop by putting additional pressure on the tool the contact is
unlocked and pushed out towards the termination side when using the removal tool the contact is unlocked by pushing the
central plunger after that the contact with the attached wire can be pulled out of the isolator body.Zhejiang Smico Electrical Technology Co.,Ltd is a company specializing in heavy duty connector Research,production and sales
as one integrated high-tech enterprises,with many years of professionaland technical strength and long-term development goals.
In the company"to the quality ofsurvival,to the credibility of development"and absorbing the international advanced technology
and design concept,is committed to providing high quality products and the best service,make the products on the market can
be a leading position.