HK FY Edinh China factory supplier needle roller bearing HK1516AS1

HK1010 High Performance Needle Roller Bearings Bearing

hard enough to act as raceway.

2.No requirement on axial location when the DC needle roller bearing is pressed into the housing.

3.Closed end DC needle roller bearings are good for sealing at close end of bearings.

4.Operating temperature range for bearings grease lubricated are -20 °C to 120 °C.

We have Needle roller Bearing type

Needle Bearing Metric series: HK, BK, F, FH, FY, MF, MFH in the department, MFY; TA.. Z, TLA.. Z, TAM, TLAM, YT, YTL.

Needle Bearing Inch series: SCE, BCE, SCH, BCH, SN, B, BH, M, MH,; BA... Z, BHA... Z, BAM, BHAM, YB, YBH.

(1)enclosed drawn cup needle roller bearings

(2)inner ring needle roller bearings

(3)and has no inner ring needle roller bearing bracket will be/without inner ring needle roller bearing

(4)with and without cage cage filled with needle roller bearing
Description:
1. Drawn cup needle roller bearings with open ends and with closed end are needle roller bearings with a very small radial section height.
2. This type bearings have by a very low sectional height and high load carrying capacity.
3. The HK Series are for the open end type and the BK Series are for the closed end type.
4. The bearings are typically used in applications where the housing bore can not be used as a raceway for a needle roller and cage assembly but where a very compact and ecnomical bearing arrangement is required.