IWILDT™-2315 X-ray machine vision eOD robot

Intelligent robot explosion-proof series

Product introduction

IWILDT™-2315 X-ray machine vision and explosive disposal robot is composed of mechanical vision system, X-ray scanning system, motion control system and analog robot hand induction system, which can accurately locate the target and automatically complete the capture function.The robot hand can be operated according to the induction gloves, which correspond to the elbow, wrist and claw transposable joints respectively. Each joint is driven by a DC motor and is controlled by a closed-loop position servo control. Only when the four cameras are installed on the robot hand can the visual field be rotated and adjusted.Installed in the top four cameras to absorb the same target, four images using the triangle range principle, the image matching and it is concluded that the target computer with accurate position, manipulator coordinate system using induction gloves to control the machine hand claw to target on the flexible explosion-proof tank tracks, judging by X-ray scanning target if there is a danger, according to the computer system.Hazardous materials can be dismantled by auxiliary robots to ensure that the target objects are free of danger.

IWILDT™-2315X Machine vision explosive ordnance disposal robot is used to deal with a variety of explosive and dangerous incidents, facilitating faster deployment and execution of tasks in emergencies.It can replace eOD personnel to discharge, transport, move and destroy suspected explosives and other hazardous materials;It can replace on-site security personnel for field investigation and real-time transmission of on-site images;It can drive in the special environment with many obstacles, adapt to the terrain such as cement road, muddy road, grassland, building roadway and various complex environments such as inflammable and explosive.

IWILDT™-2315X Machine vision explosive ordnance disposal robot replaces security personnel to conduct continuous autonomous patrols in key surveillance areas.In case of emergency, the remotely controlled robot can make a sudden investigation in front, and carry out arrest, expulsion or a variety of non-lethal strikes against terrorist elements.Applicable scenes include: police security, night patrol of boarding schools, indoor and outdoor storage, parking lot and other scenes, and patrol of public places such as hospitals, scenic spots and transportation hubs.

Product parameters

Gamma ray source
Ray power: 100KV;
Radiation direction: overhead radiation;
Penetrating object: 30mm thick;
Heat dissipation: oil-immersed;
Control mode: 232 Network port communication code control;
Collimator: Ring scattering;

Detection system

Color coating: yellow and gray;
Appearance size: 1600mm X 1000mm X 1600mm;
Equipment weight: 180kg;
Camera: Four maximum pixel size 2560×1440, minimum illumination 0.005Lux;
Camera function: face recognition, temperature measurement, license plate recognition, infrared thermal imaging;
Path scanning: laser, radar ranging;
Detection crystal: GOS;
Photoelectric conversion: CMOS;
Number of pixels: 640;
Image cable arrangement: U-shaped line array;

The image processing

Screen system: I7/4TB hard disk /24 inch 20,000:1 /IPS LCD;
Software features: edge enhancement and sharpening, image inverting, histogram equalization, image retrieval, color/black and white, local increment, overincrement, highlight/dim, zoom in/out, real-time video;
PTZ camera: switch the four-way video signal, double click the left mouse button to hide the menu, and drag the right mouse button to play back the picture;
Machine vision: obstacle radar contour scanning, 3D laser ranging viewing device, military level LL-L night vision device, underground visual mine clearance and explosive removal device, 5G/MAN secure data real-time dual-link map transmission system, GPS/ Beidou high-precision map position positioning system, CNN convolutional neural network map judgment system;
Steering wheel: Control robot action;
Image format: JPG, image named according to the scanning time;
Data storage: NVR1920X1080 high-definition H.264 encoded video storage;

Equipment performance

Induction gloves: The Angle sensor inside the induction gloves can remotely control the main manipulator and the auxiliary manipulator to remove the danger level of the suspicious target object according to the human body;
Manipulator: it can be rotated and telescopic to grasp the object better;
Number of mechanical arms: 3;
Flexible explosion-proof: The explosion-proof tank is made of non-metallic flexible materials and liquid, which can block off the flame and not produce explosion fire, reduce explosion noise and reduce psychological harm. It can be identified by TNT gunpowder test;
Explosion-proof tank: ≤35kg;
Explosion-proof single quantity: 1.5kg TNT;
Crawler chassis: good shock absorption and mobility, suitable for outdoor or indoor stairs and other complex occasions, with good pavement passing ability;
Load capacity: 40kg;
X-ray detection plate: can be used for identification of TNT and gunpowder light test;
Pull vine detection: can identify 50,000 kinds of substances;
Data surface: 5G transmission or MAN data metropolitan area network;
Audio output: Built-in 20W high frequency horn;
Auxiliary functions: electronic nose sniffing, path cruise control, UAV capture, solar power charging;
Turning radius: turn in place;
Climbing ability: ≤20°;
Crawling speed: 10 km/h (high or low speed is optional);
Endurance: 10km;
Trench crossing capacity: 500mm;
Remote control distance: non-visual range;
Battery capacity: 195AH;
Follow distance: 0-100m;
Operating temperature: -20°C to +43°C (-25°C to 50°C in option);
Storage temperature: -30°C to +55°C;
Relative humidity: Up to 95%;
Waterproof rating: IP65;
Criteria: Compliance with WORLD Health Organization, ICRP 103-2007, China, EU and USA regulations;


Why choose Wuhan Aiwei Technology Co., Ltd. ?

^{1.National high-tech enterprises
2.Wuhan famous brand products}
_{3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.}

Abous Us:


 
Enterprise honor certificate:






Company case



 
FAQ

Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.

Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.

Q3: What is your leadtime?
A: 3-7 working days after received the payment.

Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.

Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye

Pre-sales technical consulting service:

According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period,  timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.