2500X6000mm ASME Approved Rubber Vulcanizer with Indirect Steam Heaeting
China 2500X6000mm ASME Approved Rubber Vulcanizer with Indirect Steam Heaeting, Find details about China Rubber Vulcanization Autoclave, Autoclave from 2500X6000mm ASME Approved Rubber Vulcanizer with Indirect Steam Heaeting
Basic Info.
Model NO.
SN-LHG2560
Max. Working Pressure
0.8 MPa (8 Bar)
Design Temperature
200 ºC
Max. Working Temperature
180 ºC
Heating Mode
Steam Direct Heating
Control Mode
PLC+PC
Control Software
Tpc (Thermal Processing Control)
Voltage
380/400/415/440/480/600VAC
Insulation Material
Ceramic Fiber
Weight
7480 Kg
Trademark
SINOMAC or OEM
Transport Package
Standard Seaworthy Package
Specification
2500X6000mm
Origin
Changzhou, China
HS Code
84778000
Model NO.
SN-LHG2560
Max. Working Pressure
0.8 MPa (8 Bar)
Design Temperature
200 ºC
Max. Working Temperature
180 ºC
Heating Mode
Steam Direct Heating
Control Mode
PLC+PC
Control Software
Tpc (Thermal Processing Control)
Voltage
380/400/415/440/480/600VAC
Insulation Material
Ceramic Fiber
Weight
7480 Kg
Trademark
SINOMAC or OEM
Transport Package
Standard Seaworthy Package
Specification
2500X6000mm
Origin
Changzhou, China
HS Code
84778000
Product Desciption
1. Applications of SINOMAC Vulcanization Autoclave
Rubber vulcanization is a chemical process at a given pressure, temperature and time for converting natural rubber into more durable materials by the addition of sulfur. These additives modify the polymer by forming cross-links (bridges) between individual polymer chains. Vulcanized materials are less sticky and have superior mechanical properties. And vulcanization autoclave is used widely for this chemical process. The main products are galoshes, rubber tubes, cable, rubber roller, rubber ball, etc.In this field, SINOMAC has been the leader, as we have accumulated full vulcanization experience and technology for many years.
2. Basic Design Data
2.1 Model and Size
3.1. General Feature
Autoclaves with direct steam: heating and pressurization are carried out with steam. This heating system is particularly effective and indicated for products of large sizes and weight. The temperature uniformity which normally varies between ±2°C,the exchange capacity, occurring with condensation on colder surfaces, coupled with tested installations, allow to obtain excellent results.
3.2 Working Process
3.2.1 Standard curing recipe
3.2.2 A short curing recipe example
4. Equipment Technical Details
4.1 Pressure Vessel
SINOMAC Pressure Vessel with quick-opening door, can be certified to:
Internal Insulation and External Insulation
We use ceramic fiber as the insulation material. The heat transfer coefficient is very low to make the heat loss to a minimum. The covering board of ceramic fiber is stainless steel. It is corrosion resistant and looks nice. Internal insulation design can get a low energy consumption, while external insulation design gets a high one, but a better temperature uniformity.
Temperature thermocouples: 2 pcs, K type, including HMI monitoring, data-acquisition and control.
4.7 Pressure Components
4.9 Safety System
6. System General View (Indirect steam heating)
7. Packing
8.1 The equipment will be properly packed / wrapped considering long-distance ocean and land transportation and rough handling that may happen in the absence of both parties.
8.2 Proper protection from moisture, rust, mold, scratches, shaking, etc, will be taken so that the goods may arrive at the installation site in good condition.
8.3 Shipping marks and warning signed will be clearly painted, and detailed packing list (in English/Espanol) will be soundly attached, to the outside of the packing.
8. Autoclave Specification
9. Professional Workshop
10. SINOMAC Global Turnkey Projects
With the experience of manufacture and service for 15 years, our professional team are able to offer the global turnkey project, including a professional training. SINOMAC autoclaves can be made as ASEM, PED, AD standards, as well as our Chinese standard.
From the SINOMAC Team, with 15 years of experience.
Rubber vulcanization is a chemical process at a given pressure, temperature and time for converting natural rubber into more durable materials by the addition of sulfur. These additives modify the polymer by forming cross-links (bridges) between individual polymer chains. Vulcanized materials are less sticky and have superior mechanical properties. And vulcanization autoclave is used widely for this chemical process. The main products are galoshes, rubber tubes, cable, rubber roller, rubber ball, etc.In this field, SINOMAC has been the leader, as we have accumulated full vulcanization experience and technology for many years.
2. Basic Design Data
2.1 Model and Size
- Autoclave model: SN-LHGR2560
- Effective diameter: 2500mm
- Effective length: 6000mm
* Effective length is to point to do the actual length of the shell.
2.2 Production Capacity
2.2 Production Capacity
- Working circle of autoclave: can be set according to the working process
- Max size of pulley: Ø2000X6000mm
- Operating voltage: 400V (AC)±5%, 3 phase, 50 Hz
- Control power: 220VAC/50Hz/24VDC
- Cooling water consumption: ~4m3/h
- Cooling water pressure: min.3 bar ~ max. 6 bar
- Control air of control equipment: 5 ~ 7bar
- Steam capacity: 2t/h
- Max. air temperature: +50ºC
- Min air temperature: -5ºC
- Relative Humidity: <80%
- Altitude: <2000m
3.1. General Feature
Autoclaves with direct steam: heating and pressurization are carried out with steam. This heating system is particularly effective and indicated for products of large sizes and weight. The temperature uniformity which normally varies between ±2°C,the exchange capacity, occurring with condensation on colder surfaces, coupled with tested installations, allow to obtain excellent results.
3.2 Working Process
3.2.1 Standard curing recipe
| Temp. setpoint | Press. setpoint | Temp. step duration | Press. step duration | |
| Segment1 | T1 | P1 | t 1 | P-t1 |
| Segment2 | T2 | P2 | t 2 | P-t2 |
| Segment3 | T3 | P3 | t 3 | P-t3 |
| Segment4 | T4 | P4 | t 4 | P-t4 |
| Segment5 | T5 | P5 | t 5 | P-t5 |
| Segment6 | T6 | t 6 | ||
| Segment7 | T7 | t 7 | ||
| Segment8 | T8 | t 8 | ||
| Segment9 | T9 | t 9 | ||
| Segment10 | T10 | t 10 | ||
| Segment11 | T11 | t 11 | ||
| Segment12 | T12 | t 12 | ||
| Segment13 | T13 | t 13 | ||
| Segment14 | T14 | t 14 | ||
| Segment15 | T15 | t 15 |
3.2.2 A short curing recipe example
4. Equipment Technical Details
4.1 Pressure Vessel
SINOMAC Pressure Vessel with quick-opening door, can be certified to:
- CHINESE STANDARD, GB150-2011
- AMERICAN STANDARD ASME SEC VIII DIV.1 with ASME Certificate
- EUROPEAN STANDARD PED 97/23/EC with CE certificate.
- The closing system of the autoclave is the indented kind assisted with a hydraulic system, in order to quickly and secured make a totally hermetic closing.
- The whole system consists of three parts: a pair of gear flange, driven devices and seal ring.
- Hydraulically operated door opening and closing. It is controlled by PLC system.
- The seal ring is made of silicon rubber.
- Safety pressure sensors have to prevent door opening in case of pressure (allowed less than 0.1 bars).
Internal Insulation and External Insulation
We use ceramic fiber as the insulation material. The heat transfer coefficient is very low to make the heat loss to a minimum. The covering board of ceramic fiber is stainless steel. It is corrosion resistant and looks nice. Internal insulation design can get a low energy consumption, while external insulation design gets a high one, but a better temperature uniformity.
- Insulation:Internal insulation layer
- Insulation material:Ceramic fiber
- External sheet metal: stainless steel,1.0 mm
- Insulation thickness:100mm
- The heating system is a indirect steam kind.
- The indirect system will be through stainless-steel or copper tubing type heat exchanger placed on the rear side of the autoclave between fan and products. The flow have to move from material to fan, then move front door using vessel side to material
- Heating Exchanger material :304 Stainless-steel with aluminum fin or copper tubing aluminum fin
- Heating Exchanger type: Multi-row finned tubing
- Hot air circulating duct
Annular air-duct placed on the two side of the autoclave inside as the forward air delivery system. This design features make the temperature more uniform, and working space more big. - The Motor fan for circulation
The motor is bolted to the rear of the autoclave, it drives the fan directly. - Parameters of circulating fan
Power:18.5KW,6-pole, 3phase
Connecting format:direct-connected
Rated rotate speed:960r/min(400V/50HZ)
Fan wheel:7# centrifugal impeller(Diameter:700mm),
Wind pressure:1000Pa,
Flow rate:12800 M3/h. - Shaft sealing
Working with water cooling to guarantee a long life, the shaft water cooling with separate water pump and flow switch to be fitted to monitor water flow and automatically alarm/stop the cycle if there is not enough water flow.
Temperature thermocouples: 2 pcs, K type, including HMI monitoring, data-acquisition and control.
4.7 Pressure Components
- Inlet and exhaust valve, proportionally controlled, Electric control valve.
- Manual exhaust valve, 3-piece ball valve.
- Pressure transducer: 1
- Accuracy: +/- 50mbar
- Pressure gauge:1
- Control System is developed based on the research and development toward rubber vulcanization processing industry, including the PLC central controlling part, touch screen (HIM) operation system and network, it is a user friendly, state of the art, programmable digital system.
- Password protected entry access, operator can log into the system by accessing the security login form with a name and password.
- It is automatic controlling, recording and graph the temperatures and pressure of the autoclave, audible alarms for high or low temperatures or pressure.
- Manual operation screen allows operator take manual control temperature, pressure, and valves as allowed.
- It can insert or save the product working recipe, display the pressure and temperature curve anytime; and its paperless record function can realize record, save and check of technique curve and process parameters.
- It has over-temperature and overpressure alarm and various safety protection functions.
- Customer can operate register, login and typing in product information, and realize intranet or remote control.
- Communication to a Personal Computer allowed (Teamviewer ), with built in software to program, record and graph of process in real time.
- Internet connection via Team-Viewer (VPN) with our Company.
4.9 Safety System
4.9.1 Mechanical safety interlock I
Safety limit handle is interlocked with the lid. Workers have to turn the handle to unlock the safety device then the lid can be opened.
4.9.2 Electrical safety interlock II
The safety device works with safety limit handle and connects with our ECC. When workers operate the reducer and safety limit handle, while there is pressure in the autoclave, the ECC will give a sound-light alarm.
4.9.3 Safety valves
There is one safety valves on the top of autoclave. We have set a pressure limit in the valves. When the pressure exceed the limit, the valves will work automatically to release the air down to a reasonable pressure range.
5. Configurations of Autoclave
Safety limit handle is interlocked with the lid. Workers have to turn the handle to unlock the safety device then the lid can be opened.
4.9.2 Electrical safety interlock II
The safety device works with safety limit handle and connects with our ECC. When workers operate the reducer and safety limit handle, while there is pressure in the autoclave, the ECC will give a sound-light alarm.
4.9.3 Safety valves
There is one safety valves on the top of autoclave. We have set a pressure limit in the valves. When the pressure exceed the limit, the valves will work automatically to release the air down to a reasonable pressure range.
5. Configurations of Autoclave
- HMI: Wenview touch screen, TAIWAN
- PLC: Siemens
- Main electrical component : Schneider,China
- Limited switch: Omron
- AUTOCLAVE Shell: ASME/PED/GB, SINOMAC
- Hydraulic components: Hualiang, China
6. System General View (Indirect steam heating)
7. Packing
8.1 The equipment will be properly packed / wrapped considering long-distance ocean and land transportation and rough handling that may happen in the absence of both parties.
8.2 Proper protection from moisture, rust, mold, scratches, shaking, etc, will be taken so that the goods may arrive at the installation site in good condition.
8.3 Shipping marks and warning signed will be clearly painted, and detailed packing list (in English/Espanol) will be soundly attached, to the outside of the packing.
8. Autoclave Specification
| MODEL SN-LHG2560 VULCANIZATION AUTOCLAVE-TECHNICAL PARAMETER | |||
| No. | Description | Unit | Specifications and Parameters |
| 1 | Effective Working Diameter | mm | 2500 |
| 2 | Effective Working Length | mm | 6000 |
| 3 | Autoclave Track Distance | mm | 900 |
| 4 | Design Pressure | MPa | 1 |
| 5 | Max. Working Pressure | MPa | 0.8 |
| 6 | Safety Valve Exhaust | MPa | 0.85 |
| 7 | Design Temperature | ºC | 200 |
| 8 | Max. Working Temperature | ºC | 180 |
| 9 | Temperature Uniformity at Steady State | ºC | ±2 |
| 10 | Openning Door Mode | --- | Hydraulic |
| 11 | Working Medium | --- | Compressed air |
| 12 | Heating Mode | --- | Steam indirect heating |
| 13 | Heating Power | KW | 162 |
| 14 | Quantity of Circulating Fan Motor | Set | 1 |
| 15 | Quantity of Circulating Fan Motor | KW | 15 |
| 16 | Thermocouple Type | --- | Type K or J |
| 17 | Vaccum Lines | Piece | --- |
| 18 | Quantity of Vaccum Pressure Transducer | Piece | --- |
| 19 | Standard Control Mode | --- | PLC+PC |
| 20 | Control Software | --- | Thermal Processing Control (TPC) |
| 21 | Insulation Type | --- | Internal |
| 22 | Insulation Material | --- | Ceramic Fiber |
| 23 | Insulation Thickness | mm | 75 |
| 24 | Insulation Sheet Material | --- | Stainless Steel or Aluminized Steel |
| 25 | Working Environment Temperature | ºC | Min. -20ºC, ,Max. +45ºC |
| 26 | Working Environment Humidity | --- | <60% |
| 27 | Power Supply | --- | 400VAC, 3P+N+PE, 50/60Hz |
| 28 | Weight | KG | 16500 |
9. Professional Workshop
10. SINOMAC Global Turnkey Projects
With the experience of manufacture and service for 15 years, our professional team are able to offer the global turnkey project, including a professional training. SINOMAC autoclaves can be made as ASEM, PED, AD standards, as well as our Chinese standard.
From the SINOMAC Team, with 15 years of experience.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......